结晶聚合物的中间层

介绍了结晶聚合物中间层概念及各种实验技术所提供的中间层存在的证据。附25篇参考文献。     

Structure of polynuclear palladium(ii) hydroxocomplexes formed upon alkaline hydrolysis of palladium(ii) chloride complexes

The structure of polynuclear Pd^II hydroxocomplexes (PHC) formed as a result of alkaline hydrolysis of Pd^II chloride complexes was studied by EXAFS, SAXS, and TEM methods. It is established that in aqueous solutions a hydroxocomplex particle is a filament curled into a ball containing about 100 Pd atoms. The filament consists of planar coordination squares of PdO₄ units linkedvia one or two oxygen bridges of different geometry. Aging of samples results in an increase in the number of single bridging ligands and a decrease in the diameter of particles. Interatomic distances around palladium atoms were determined.Translated fromIzvestiya Akademii Nauk. Seriya Khimlcheskaya, No. 10, pp. 1901–1905, October, 1995.     

Effects of processing on the structure of zein/oleic Acid films investigated by x-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 A, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5 A d-spacing remained stable under processing while the 10 A d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 A) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods. Structural model for a zein molecular aggregate (based on Matsushima et al.10). Rectangular prisms of individual zein molecules are hexagonally aligned parallel to each other.     

双亲性三嵌段共聚物/水体系超分子结构的研究

利用小角 X-射线散射技术研完了双亲性聚氧化乙烯-聚二甲基硅氧烷-聚氧化乙烯三嵌段共聚物/水体系在高浓度的溶致性液晶相,测定了亲水区、疏水区随浓度和结构变化的尺寸等超分子结构参数。用简单的几何模型可满意地解释实验结果。     

PEO／PBHE共混体系X射线散射研究

在聚环氧乙烷(PEO)/聚双酚A羟基醚(PBHE)共混体系中PEO是一个强质子受体,而PBHE是一个强质子给体,两者极易形成氢键,十分有利于形成互容对。笔者研究了PEO/PBHE共混体系的相容性,等温及非等温结晶动力学,本文根据Vonk提出的一维电子密度相关函数,分析了PEO/PBHE的SAXS现象,求得了共混体系的结晶度,片晶层厚度,过渡层厚度及长周期等结构参数。     

小角X射线散射表征AOT/水层状溶致液晶的有序性

用小角X射线散射研究了AOT/水层状溶致液晶的有序性. 通过对散射曲线的解析, 讨论了表面活性剂浓度、温度和助表面活性剂等三个方面对溶致液晶层状相结构有序性的影响. 在一定的范围内, 提高温度, 改变表面活性剂浓度和加入少量助表面活性剂可使碳氢链排列由稀疏转变为密实, 层状相也相应地由“柔性双层”过渡到更加有序化的“平面双层”. 基于形状因子和体系内分子间作用力, 提出了层状相形成与有序化的机理, 同时采用分子模拟的方法展现了不同浓度下的液晶结构.     

Nanostructure evolution studies of bulk polymer materials with synchrotron radiation: progress in method development

The prospects of a modern analysis of nanostructure evolution during the processing of polymer materials by means of scattering from synchrotron radiation are demonstrated in examples. The beam sources have gained stability, shortages are located in beamline setups and in method development for the quantitative analysis of voluminous data sets.By using the proposed multidimensional chord distribution function (CDF) analysis method, nanostructure information from small-angle X-ray scattering (SAXS) data are extracted and visualised. The method can be automated if the beamline setup is able to deliver a full data set with simple constraints. In this case even a simultaneous data evaluation is possible (while one pattern is accumulated, the previous one is analysed). The advantages of the method are demonstrated in a study of the straining of a thermoplastic elastomer. The possibilities of an automated analysis are demonstrated in an investigation of the crystallisation behaviour of high-pressure injection-moulded polyethylene (HPIM-PE). The achievable results of nanostructure analysis of polymer materials are discussed. It is shown that the time-resolved SAXS of polymer materials studied during a transformation and analysed by the CDF method is not just a powerful tool to investigate the relationship between structure and properties of materials; the information that can be gained concerning the processes that control nanostructure evolution is equally important. In the future the enlightenment of such relationships may help to tailor polymer materials with respect to their properties and, beyond that, to improve assessments concerning their aging.     

Amorphous phase evolution during crystallization of poly(ethylene-terephthalate)

Crystallization of poly(ethylene terephthalate) from the amorphous state has been studied in the temperature range 90°–120°C to characterize the amorphous phase when crystalline microstructure is developing. Small-angle x-ray scattering, scanning electron microscopy, and density measurements were used to investigate the morphology of semi-crystalline materials. Differential scanning calorimetry and dynamical mechanical spectroscopy experiments were carried out on amorphous, partially crystallized and crystallized specimens and, when structural relaxation is allowed (thermal treatments close to but below glass transition temperature), strong evidence is obtained for the existence of two different amorphous phases with different mobilities.     

Comparing the Atomic Structures of Binary MO2-SiO2 (M = Ti, Zr or Hf) Xerogels

The incorporation of transition-metal oxides into silica can give materials with useful optical, electronic or catalytic properties. For example, ZrO₂-SiO₂ and HfO₂-SiO₂ materials are of interest due to their high dielectric constants. Here we present a comparison of extended X-ray absorption fine structure and small-angle X-ray scattering results for acid-catalysed binary (MO₂) _x (SiO₂)_{1 – x} (M = Ti, Zr or Hf) xerogels, with x up to 0.4 and heat treatments up to 750°C. Detailed observations for TiO₂-SiO₂ and ZrO₂-SiO₂ xerogels provide a basis for interpretation of new results for HfO₂-SiO₂ xerogels. At low concentrations metal atoms are homogeneously incorporated into the silica network. Ti adopts coordinations of 4 or 6, and Zr and Hf both adopt higher coordination of 6 or 7 (the larger coordinations being due to ambient moisture). At higher concentrations, phase separation of metal oxide occurs. Such regions become clearly separated from the silica network for TiO₂, but remain very finely mixed with silica network for ZrO₂ and HfO₂.     

SAXS对NLO芪唑盐LB薄膜稳定性的研究

具有优良NLO性质的芪唑盐(记为S)已被用于制备LB薄膜,但其成膜性不好,稳定性差;S和花生酸镉(记为A)的混合系虽可改善成膜性,但在此混合膜系中,S相的稳定性仍然不佳。应用SAXS和微机模型拟合(MCMI)研究了上述两类LB薄膜的凝聚态结构,结果指出:在LB薄膜的二维类晶系结构中,S分子中呈哑铃形的芪唑基倾向于作倾斜状的密堆砌,S分子中的丙条脂肪链则倾向于采取全反式燕尾式构象,而且脂肪链只占S分子长的2/3,这就导致了S分子在二维类晶系结构中凝聚力的下降,以及造成LB薄膜层状超分子结构的破坏和崩塌。