银电极上2-巯基吡啶和4-巯基吡啶自组装单层的原位表面增强拉曼光谱电化学

利用原位表面增强拉曼散射(SERS)技术,分别观察了2-巯基吡啶和4-巯基吡啶在银表面自组装单层的电化学行为。实验结果表明,随着电位的负移,2-巯基吡啶和4-巯基吡啶分子在银表面均呈现出先倾斜再垂直然后倾斜的吸附取向改变过程。但发生完全脱附的电位则有所不同。     

Time‐of‐flight secondary ion mass spectrometry and gas chromatography–mass spectrometry studies of alkanethiol self‐assembled monolayers on nanoporous gold surfaces

The dimerization of alkanethiol mixtures (hexanethiol, octanethiol, and dodecanethiol) to form self‐assembled monolayers (SAMs) from headspace on nanoporous gold surfaces was studied for the first time using gas chromatography (GC/MS) and time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS). The nanoporous gold surfaces were obtained by an acidic etching of a 585‐gold alloy. Field emission scanning electron microscopy (FE‐SEM) was utilized to study the change of the surface geometry and porosity of the gold surfaces before and after etching. Alkanethiols were deposited from the vapor phase above the thiol solutions (headspace) on nanoporous gold plates and nanoporous gold solid‐phase vmicroextraction (SPME) fibers. The nanoporous gold substrates were analyzed by TOF‐SIMS and GC/MS, respectively. The TOF‐SIMS spectra exhibited various gold–sulfur ion clusters and specific peaks related to the adsorption of thiols such as deprotonated monomers, thiolate–Au, dimers (e.g., dialkyl sulfides–Au and dialkyl disulfides–Au). The GC/MS analysis of headspace extractions of alkanethiol mixtures by nanoporous gold SPME fibers showed a high extraction efficiency of alkanethiol, dialkyl sulfide, and dialkyl disulfide when compared with the commercial SPME fibers (DVB‐CAR‐PDMS and CAR‐PDMS). Different GC/MS optimization factors were studied including the extraction time and desorption temperature.     

分子动力学模拟多巴在自组装膜上的黏附性

为了更好地理解贻贝在表面的黏附机理,实现水下胶黏,采用分子动力学方法研究了多巴在自组装膜上的黏附性:采用伞形取样和加权柱状图分析方法计算了多巴在不同自组装膜表面的黏附自由能,使用拉伸分子动力学模拟研究了多巴在不同自组装膜表面上黏附后的脱附力.结果表明,多巴在带负电的羧基自组装膜上的黏附能比在带正电的氨基自组装膜上的大,多巴更容易黏附到带负电表面;多巴在带电表面的黏附能比未带电表面的黏附能更强,表明在带电表面黏附更稳定.进一步分析了多巴在不同表面的取向分布,发现多巴与不同表面相互作用的方式不同:与疏水表面主要通过苯环相互作用;与亲水表面主要通过羟基相互作用;与负电表面主要通过氨基相互作用;与正电表面主要通过羧基相互作用.通过模拟比较了多巴在不同自组装膜上的脱附力,发现多巴在带电表面的脱附力比在未带电表面的大,与黏附能的趋势一致.对比4种非带电表面的脱附力,发现多巴在疏水性甲基自组装膜表面的脱附力最大,黏附更稳定,随着表面疏水性的增加,脱附力增大,黏附稳定性增强.本工作可为研发新型水下胶黏剂提供理论指导.     

Nanoporous structures on ZnO thin films

Porous structures were formed on ZnO thin films which were grown by an electrochemical deposition (ECD) method. The growth processes were carried out in a solution of dimethylsulfoxide (DMSO) zinc perchlorate, Zn(ClO₄)₂, at 120 ^°C on indium tin oxide (ITO) substrates. Optical and structural characterizations of electrochemically grown ZnO thin films have shown that the films possess high (0002) c$c$-axis orientation, high nucleation, high intensity and low FWHM of UV emission at the band edge region and a sharp UV absorption edge. Nanoporous structures were formed via self-assembled monolayers (SAMs) of hexanethiol (C₆SH) and dodecanethiol (C₁₂SH). Scanning electron microscope (SEM) measurements showed that while a nanoporous structure (pore radius 20 nm) is formed on the ZnO thin films by hexanathiol solution, a macroporous structure (pore radius 360 nm) is formed by dodecanethiol solution. No significant variation is observed in X-ray diffraction (XRD) measurements on the ZnO thin films after pore formation. However, photoluminescence (PL) measurements showed that green emission is observed as the dominant emission for the macroporous structures, while no variation is observed for the thin film nanoporous ZnO sample.     

Electrochemical and in situ SERS spectroelectrochemical investigations of 4‐methyl‐4H‐1, 2, 4‐triazole‐3‐thiol monolayers at a silver electrode

Electrochemically anticorrosive behavior of 4‐methyl‐4H‐1, 2, 4‐triazole‐3‐thiol (MTTL) self‐assembled monolayers (SAMs) on the silver electrode was studied by means of electrochemical impedance spectroscopy (EIS) and polarization measurements. The promising inhibition effect of the MTTL for silver had been affirmed. Results of surface‐enhanced Raman scattering (SERS) experiments indicated that the MTTL molecule in a tilted orientation was self‐assembled on the silver surface through S⁶ and N² atoms to form monolayers. An in situ electrochemical SERS experiment implied the changes of adsorption fashion of MTTL momolayers on the silver surface with the potential shifted to more negative direction. Copyright © 2009 John Wiley & Sons, Ltd.     

Conformational order of n-dodecanethiol and n-dodecaneselenol monolayers on polycrystalline copper investigated by PM-IRRAS and SFG spectroscopy

Self-assembled monolayers (SAMs) of n-dodecanethiol (C₁₂H₂₅SH) and n-dodecaneselenol (C₁₂H₂₅SeH) on polycrystalline copper have been elaborated with the purpose of achieving densely packed and crystalline-like assemblies. By combining the surface sensitivity of polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) and sum-frequency generation spectroscopy (SFG), the effect of the self-assembly time (15 min, 30 min, 1 h, 2 h and 24 h) on the formation of n-dodecanethiol and n-dodecaneselenol monolayers on untreated and electrochemically reduced polycrystalline copper has been investigated. On electrochemically reduced copper, PM-IRRAS spectroscopy shows that both molecules are able to form well organized layers. SFG spectroscopy indicates that the C₁₂H₂₅SeH SAMs are slightly better ordered than those achieved with C₁₂H₂₅SH. On untreated copper, the two molecules lead to different film organizations. Both PM-IRRAS and SFG indicate that C₁₂H₂₅SH SAMs are of the same film quality as those obtained on electrochemically reduced copper. On the contrary, C₁₂H₂₅SeH monolayers are invariably poorly organized at the molecular level.     

A scanning tunnelling microscopy investigation of gold island formation from an octanethiol self-assembled monolayer on Au(1 1 1)

The release of gold atoms from an octanethiol monolayer on Au(1 1 1) and the subsequent formation of single-layer-high gold islands have been investigated using a scanning tunnelling microscope (STM) in air. When the bias voltage between the STM tip and the sample is above the threshold for water electrolysis, reactive desorption of the thiol molecules takes place leading to the release of gold adatoms. The number of released atoms has been evaluated as a function of exposure to the tip current under both positive and negative bias voltages. Tip-induced ripening of the gold islands, and more interestingly, tip-induced disintegration of small islands are observed.     

Non-covalent immobilization of C60 on gold surfaces by SAMs of porphyrin derivatives

Three porphyrin derivatives, one containing thioctic ester groups (3) and the other two with thioether chains (4 and 5), were synthesized. The cyclic voltammograms of the porphyrin compounds exhibit two reversible reduction processes and one reversible oxidation. Stable self-assembled monolayers (SAMs) of the porphyrin compounds were formed on gold surfaces. Non-covalent immobilization of C₆₀ was accomplished upon incubation of some of the porphyrin SAMs in solutions of C₆₀.     

基于巯基自组装单层膜技术的补体C3压电免疫传感器的研究

本文采用自组装单层膜(SAMs)技术在压电石英晶振金电极表面组装巯基丙酸SAMs,以盐酸1-乙基-3-(3-二甲基氨基丙基)碳二亚胺(EDC)和N-羟基琥珀酰亚胺(NHS)作偶联剂共价固定补体C3抗体,研制了一种检测人血清中补体C3成分的压电免疫传感器。研究了巯基丙酸的自组装和抗体的固定化条件,考察了晶振固定抗体后的液相振荡行为和检测特性。并利用压电传感装置的实时监测功能,研究了巯基丙酸在金电极表面的自组装成膜过程和补体C3免疫反应动力学,获得了重要的动力学依据和参数。传感器检测补体C3的线性范围为2．34～23．2μg／mL。将传感器用于临床样品的检测,所得结果与酶联免疫吸附法基本一致。     

Quantitative and morphological analysis of biofilm formation on self-assembled monolayers

In spite of intensive studies over the past two decades, the influence of surface properties on bacterial adhesion and biofilm formation remains unclear, particularly on late steps. In order to contribute to the elucidation of this point, we compared the impact of two different substrates on the formation of bacterial biofilm, by analysing bacterial amount and biofilm structure on hydrophilic and hydrophobic surfaces. The surfaces were constituted by NH₂- and CH₃-terminated self-assembled monolayers (SAMs) on silicon wafers, allowing to consider only the surface chemistry influence because wafers low roughness. A strain of Escherichia coli K12, able to produce biofilm on abiotic surfaces, was grown with culture durations varying from 4 h to 336 h on both types of substrates. The amount of adhered bacteria was determined after detachment by both photometry at 630 nm and direct counting under light microscope, while the spatial distribution of adhered bacteria was observed by fluorescence microscopy. A general view of our results suggests a little influence of the surface chemistry on adherent bacteria amount, but a clear impact on dynamics of biofilm growth as well as on biofilm structure. This work points out how surface chemistry of substrates can influence the bacterial adhesion and the biofilm formation.