失效原子力显微镜硅针尖再生

原子力显微镜的传统商品硅针尖在使用过程中极易因磨损而失效，本文研究了一种在实验室条件下简易可行的回收利用失效硅针尖的方法。在原子力显微镜的敲击模式下使用曲率半径大于100 nm的失效硅针尖对生长单壁碳纳米管的样品表面进行扫描，把样品表面的单壁碳纳米管管束粘接到硅针尖上，可制得直径在5～20 nm的碳纳米管针尖。实验对碳纳米管针尖和新的商品硅针尖进行了成像对比，所制备的碳纳米管针尖不仅在成像分辨率而且在成像稳定性上都优于新的商品硅针尖。     

Catalytic properties of spinel-type complex oxides in oxidation reactions

The catalytic activity of M^IM^II ₂O₃ spinel-type complex oxides (M^I = Cu, Ni, Mn, Zn, Mg, Co, M^II = Co, Cr, Al) in the oxidation of CO and ethylbenzene has been investigated. The Co-containing catalysts were more active than the Cr- and Al-containing catalysts. The nature of the cation influenced the catalytic activity. Higher activities were observed for the catalysts containing two transition elements. A correlation between the catalytic and adsorption properties was established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1730–1732, October, 1994.     

Electroanalytical Study of Prussian Blue Modified Glassy Carbon Paste Electrodes

Two types of glassy carbon (GC) powder (i.e., Sigradur K and Sigradur G) have been mixed with mineral oil to obtain glassy carbon paste electrodes (GCPE's). The electrochemical behavior of such electrodes at different percentages of glassy carbon has been evaluated with respect to the electrochemistry of ferricyanide as revealed with cyclic voltammetry and the best paste composition was chosen. GC was then modified with Prussian Blue (PB), mixed at different percentages with unmodified GC and with a fixed amount of mineral oil in order to obtain PB modified glassy carbon paste electrodes (PB‐GCPE's). PB‐GCPE's with different percentages of GC modified with PB (PB‐GC) were compared and the dependence on the amount of PB on their performances was evaluated by studying the parameters of cyclic voltammetry (i.e., current peak, ΔE_p, anodic and cathodic current ratio, charge density) and the amperometric response to H₂O₂. Data interpretation based on the GC surface area is presented. GCPE's with a selected amount of PB‐GC were then tested as H₂O₂ probes and all the analytical parameters together with the dependence on pH were evaluated. Some preliminary experiments with these electrodes assembled as glucose, lysine and lactate biosensors are also reported.     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Palladium-catalyzed regio- and diastereo-selective allylic alkylation using 2-(diphenylphosphino)benzoic acid: construction of vicinal quaternary and tertiary carbon centers

The palladium-catalyzed regio- and diastereo-selective allylic alkylation of allyl acetates with carbon nucleophiles occurred. The stereochemistry was highly controlled by the palladium catalyst with 2-(diphenylphosphino)benzoic acid as the ligand, and vicinal quaternary and tertiary carbon centers were constructed.     

Voltammetric behavior and determination of bismuth on sodium humate modified carbon paste electrode

The preconcentration and voltammetric behavior of Bi^III on a sodium humate modified carbon paste electrode was studied by means of cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV). The proposed measurement involves an initial nonelectrolytic preconcentration step in which Bi^III is complexed by the surface modifier in a solution of 0.05 M KNO₃-0.0106 M HNO₃ (pH 2.0) and a subsequent electrochemical scan step in which the preconcentrated Bi^III was reduced and then oxidized promptly in supporting electrolyte of 0.5 M HNO₃. The resulting DPSV anodic current was proportional to the concentration of Bi^III ion over the range of 4.78 × 10⁻⁸–1.44 × 10⁻⁵ M. The detection limit was 4.78 × 10⁻⁸ M. The proposed method was used to determine bismuth in various samples. Various factors affecting the electrode behavior were also investigated at the same time.     

The effect of electrochemically treated glassy carbon on the activity of supported Pt catalyst in methanol oxidation

Effect of electrochemical oxidation of glassy carbon on deposition of platinum particles and electrocatalytic activity of platinum supported on oxidized glassy carbon (Pt/GC_OX) were studied for methanol oxidation in H₂SO₄ solution. Platinum was potentiostatically deposited from H₂SO₄ + H₂PtCl₆ solution. Glassy carbon was anodically polarised in 0.5 M H₂SO₄ at 2.25 V vs. saturated calomel electrode (SCE) during 35 s. Electrochemical treatment of GC support, affecting not significantly the real Pt surface area, leads to a better distribution of platinum on the substrate and has remarkable effect on the activity. The activity of the Pt/GC_OX electrode for methanol oxidation is larger than polycrystalline Pt and for more than one order of magnitude larger than Pt/GC electrode. This increase in activity indicates the pronounced role of organic residues of GC support on the properties of Pt particles deposited on glassy carbon.     

Gas-Chromatographic Studies of the Interaction between Water and Methanol Molecules and the Surface of Carbon Materials

The gas-chromatographic method is used to study the interaction of water and methanol molecules with active hydrophilic centres existing at the surface of thermally exfoliated graphite and graphitized thermal carbon black. The concentration of carboxyl and phenol hydroxyl groups at the surface of these sorbents is determined, and heats of adsorption of the studied molecules are shown to be and 28−25 kJ/mol, respectively. It is also shown that adsorption of water at the hydrophilic centres at lowest relative pressure values takes place with formation of clusters consisting of n = 2 water molecules.     

通过三乙基铝促进的a-羟基环氧化合物的重排还原反应合成Madindoline母核片断——全取代环戊烯二酮单元

The fully substituted cyclopentenedione core of madindoline A （1） and B （2） as potent and selective inhibitor of IL-6 has been synthesized efficiently. The quaternary carbon center C-2＇ was constructed on the basis of a newly developed AIEt3-promoted tandem reductive rearrangement of α-hydroxy epoxides.     

二氧化碳—环氧丙烷—甲苯二异氰酸酯的三元共聚

二氧化碳和环氧丙烷(PO)在阴离子配位催化剂,如二乙基锌和等摩尔的水作用下,可接式(1)发生共聚。但产物聚丙撑碳酸酯(PPC)的热稳定性较差。改进途径之一是在反应中引入甲苯二异氰酸酯(TDI)进行三元共聚。本文报导在双金属阴离子配位催化剂PBM存在下合成一种热稳定性优于PPC的聚碳酸酯聚氨酯(PCPU)的研究结果(式2)。