Sensitivity enhancement in natural-abundance solid-state 33S MAS NMR spectroscopy employing adiabatic inversion pulses to the satellite transitions

The WURST (wideband uniform rate smooth truncation) and hyperbolic secant (HS) pulse elements have each been employed as pairs of inversion pulses to induce population transfer (PT) between the four energy levels in natural abundance solid-state (33)S (spin I=3/2) MAS NMR, thereby leading to a significant gain in intensity for the central transition (CT). The pair of inversion pulses are applied to the satellite transitions for a series of inorganic sulfates, the sulfate ions in the two cementitious materials ettringite and thaumasite, and the two tetrathiometallates (NH(4))(2)WS(4) and (NH(4))(2)MoS(4). These materials all exhibit (33)S quadrupole coupling constants (C(Q)) in the range 0.1-1.0 MHz, with precise C(Q) values being determined from analysis of the PT enhanced (33)S MAS NMR spectra. The enhancement factors for the WURST and HS elements are quite similar and are all in the range 1.74-2.25 for the studied samples, in excellent agreement with earlier reports on HS enhancement factors (1.6-2.4) observed for other spin I=3/2 nuclei with similar C(Q) values (0.3-1.2 MHz). Thus, a time saving in instrument time by a factor up to five has been achieved in natural abundance (33)S MAS NMR, a time saving which is extremely welcome for this important low-gamma nucleus.     

Biocatalysis for C–S bond formation: Porcine pancreatic lipase (PPL) catalysed thiolysis/hydrothiolation reactions in sole water

In this paper, a biocatalytic route is described wherein PPL, lipase from porcine pancreas, in conjunction with water on reaction with different thiophenols and styrene oxides undergo thiolysis with C-S bond formation without the use of any metal catalysts, oxidants, bases, additives or organic solvents towards formation of β-hydroxysulfides in good to excellent yields with high regioselectivity at room temperature. Furthermore, PPL also facilitates thiophenols to undergo hydrothiolation with styrenes or phenylacetylenes in sole water and thus forming linear thioethers or vinylsulfides respectively via C–S bond formation. In addition to the straightforward and atom-efficient protocol, a gram-scale synthesis of β-hydroxysulfide and recyclability for three consecutive cycles without decrease in efficiency of PPL make our biocatalytic protocol for constructing C–S bond highly valuable from both environmental and economic viewpoints than traditional chemical practices.     

Modifications of 5,12-dihydroindolo[3,2-a]carbazole scaffold via its regioselective C2,9-formylation and C2,9-acetylation

The effective approaches for regioselective double formylation and acetylation of 5,12-dialkyl-6,7-diaryl-substituted 5,12-dihydroindolo[3,2-a]carbazoles by their treatment with dichloromethyl methyl ether in the presence of SnCl₄ or with acetyl chloride in the presence of AlCl₃ to afford the 2,9-diformyl or 2,9-diacetyl derivatives, respectively, were developed. Furthermore, new 2,9-bis(2,2-dicyanovinyl) derivatives were synthesized by the Knoevenagel condensation of diformyl-containing substrates with malononitrile, when new 2,9-bis(quinoxaline-2-yl)- and 2,9-bis(benzo[g]quinoxaline-2-yl) derivatives were formed via microwave-promoted oxidation of diacetyl-containing substrates with SeO₂ to the corresponding diglyoxals, followed by the reaction of these intermediates with o-phenylendiamine or 2,3-diaminonaphthalene, respectively. The basic optical and electrochemical properties of some 5,12-dihydroindolo[3,2-a]carbazoles were investigated.     

Pd-nanoparticles catalyzed denitrogenative coupling of aryl halides with arylhydrazines: Greener approach for biaryls synthesis under ligand-free condition

The greener approach for the synthesis of biaryl using palladium nanoparticle (Pd–NPs) catalyzed denitrogenative coupling between aryl hydrazine and aryl halides under ligand-free condition has been described. The phytochemicals of the black pepper extract plays a dual role in reduction of Pd^II to Pd⁰ and acts as stabilizing agent for Pd–NPs. The electronically diver's arylhydrazines and commercially available aryl halides are used for the synthesis of symmetrical and unsymmetrical biaryls in good to excellent yield. The mechanism is well supported by control experiment and the recyclability, turnover number and turnover frequency of biogenically synthesized Pd–NPs is studied.     

New Transition Metal Oxo‐Thiostannate: Synthesis,Characterization, and Investigation of its Photocatalytic Properties

The new transition metal oxo‐thiostannate {[Ni(cyclen)]₆[Sn₆S₁₂O₂(OH)₆]} · 2(ClO₄) · 19H₂O ( 1 ) was prepared under hydrothermal conditions using Na₄SnS₄ · 14H₂O and [Ni(cyclen)](ClO₄)₂ as reactants. In the crystal structure the rare [Sn₆S₁₂O₂(OH)₆]^10– anion is observed, which is composed of SnS₂O(OH)₃ and SnS₄O₂ octahedra, and SnS₄ tetrahedra sharing edges and corners. The anion is expanded by six Ni²⁺ centered complexes via Ni–S and Ni–OH bonds. The photocatalytic properties for the visible light driven hydrogen evolution reaction shows that 26.6 mmol · g^–1 H₂ were evolved after 3 h.     

A Robust Solid Electrolyte Interphase Layer Augments the Ion Storage Capacity of Bimetallic‐Sulfide‐Containing Potassium‐Ion Batteries

Metal–organic framework‐derived NiCo_2.5S₄ microrods wrapped in reduced graphene oxide (NCS@RGO) were synthesized for potassium‐ion storage. Upon coordination with organic potassium salts, NCS@RGO exhibits an ultrahigh initial reversible specific capacity (602 mAh g^?1 at 50 mA g^?1) and ultralong cycle life (a reversible specific capacity of 495 mAh g^?1 at 200 mA g^?1 after 1 900 cycles over 314 days). Furthermore, the battery demonstrates a high initial Coulombic efficiency of 78 %, outperforming most sulfides reported previously. Advanced ex situ characterization techniques, including atomic force microscopy, were used for evaluation and the results indicate that the organic potassium salt‐containing electrolyte helps to form thin and robust solid electrolyte interphase layers, which reduce the formation of byproducts during the potassiation–depotassiation process and enhance the mechanical stability of electrodes. The excellent conductivity of the RGO in the composites, and the robust interface between the electrodes and electrolytes, imbue the electrode with useful properties; including, ultrafast potassium‐ion storage with a reversible specific capacity of 402 mAh g^?1 even at 2 A g^?1.     

Effect of monovalent ion binding on molecular dynamics of the S100-family calcium-binding protein calbindin D9k

Calbindin D_9k is a member of the S100 subfamily of EF-hand calcium binding proteins, and has served as an important model system for biophysical studies. The fast timescale dynamics of the calcium-free (apo) state is characterized using molecular dynamics simulations. Order parameters for the backbone NH bond vectors are determined from the simulations and compared with experimentally derived values, with a focus on the dynamics of calcium-binding site I. There is a significant discrepancy between simulated and experimental order parameters for site I residues in the case of no ion bound in site I. However, it was found in the simulations that a Na⁺ ion can bind in site I, and the resulting order parameters determined from the simulations are in excellent agreement with experiment. Comparisons are made to X-ray structures of other S100 family members in which Na⁺ ions were observed or suggested to be bound in site I. © 2019 Wiley Periodicals, Inc.     

垃圾衍生燃料热解半焦气化过程中HCl与H2S析出规律

通过水平管式气化炉和化学吸收法,对比研究了矿化垃圾热解半焦（ARC）和常规垃圾热解半焦（NRC）在水蒸气和CO₂气化过程中腐蚀性气体（HCl和H₂S）的析出特性,考察了气化温度、气化介质类型和流量对腐蚀性气体析出特性的影响。当气化温度升至950℃,ARC在水蒸气气化过程中的碳气化率、HCl和H₂S产率分别为66.1%、100%和74.9%,而其在CO₂气化过程中的碳气化率、HCl和H₂S产率分别为77.8%、100%和2.9%;NRC在水蒸气气化过程中的碳气化率、HCl和H₂S产率分别为98.8%、100%和53.7%,而其在CO₂气化过程中的碳气化率、HCl和H₂S产率分别为100%、96.2%和10.3%。以NRC为原料,考察了水蒸气和CO₂流量对其HCl和CO₂析出特性的影响。NRC的HCl和H₂S产率均随水蒸气流量增加而增加,但当水碳比大于等于3.3时,其促进作用不再明显。NRC的HCl产率随CO₂流量的增加而增加,而H₂S产率随CO₂流量的增加而减小。     

LaCoO3对H2S选择氧化性能的影响

使用溶胶-凝胶法制备了LaCoO₃催化剂,采用XRD、BET和XPS等方式对催化剂进行了表征,考察了该催化剂制备过程中煅烧温度、表面活性剂PEG-6000和PEG-20000含量对其H₂S选择氧化制硫磺反应催化活性的影响。结果表明,表面活性剂PEG-6000及PEG-20000的添加能明显提高LaCoO₃的催化活性。0.02 mol La（NO₃）₃+0.02mol Co（NO₃）₂溶液中添加0.30 g PEG-20000、煅烧温度为650℃时所制备的LaCoO₃催化活性最好;在最佳反应温度260℃下,H₂S的转化率达到96.10%,硫选择性为93.77%。     

NiCo_2S_4六角片作为钠离子电池负极材料的电化学性能及储钠动力学

通过共沉淀以及后续的气相硫化成功制备了横向边长约为2μm,纵向厚度约为30 nm的NiCo_2S_4六角片,并研究了其作为钠离子电池负极材料的电化学性能。电化学性能测试结果显示在1000 mA·g~(-1)的电流密度下,NiCo_2S_4电极循环60次后仍然可保持约387mAh·g~(-1)的可逆比容量。此外,NiCo_2S_4电极还具有良好的倍率性能,在200、400、800、1000和2000mA·g~(-1)的电流密度下,容量分别为542、398、347、300和217mAh·g~(-1)。通过进一步动力学机制分析发现,NiCo_2S_4电极的良好的倍率性能得益于其二维片层状结构诱导产生的赝电容。上述结果表明,NiCo_2S_4纳米六角片是一种极具潜力的钠离子电池负极材料。