Rubidium-decaamidodichromat(III), Rb4Cr2(NH2)10 – Synthese und Kristallstruktur

Rubidium Decaamidodichromate(III), Rb₄Cr₂(NH₂)₁₀ – Synthesis and Crystal Structure The reaction of chromium(III) with rubidium amide in a molar ratio of Cr(NH₂)₃/RbNH₂ = 1 : 1.75 at 140 °C and p(NH₃) = 3 kbar in a high-pressure autoclave results after 90 days in dark violet crystals of Rb₄Cr₂(NH₂)₁₀. Structure determination was done by single crystal X-ray methods:Pna2₁ (No. 33), Z = 4, a = 12.244(3) Å, b = 6.727(1) Å, c = 19.775(5) Å, N(F²_o > 3σ(F²_o)) = 1046, N(Var.) = 94, R/R_w = 0,051/0,059&#TAB;The structure of Rb₄Cr₂(NH₂)₁₀ contains isolated, face-sharing N-octahedra around two Cr³⁺-ions giving [Cr(NH₂)₃(NH₂)_3/2]₂^3–. These are arranged to oneanother following the motif of a hexagonal closest packing. They are connected via Rb⁺- and one further amide ion not bound to Cr³⁺. The compound is characterized by thermoanalytical and IR-/Raman-spectroscopic measurements.     

Formation of Isomeric Tetrathiotungstate Clusters [{Cp*Ru(CO)}2(WS4){W(CO)4}] by the Reaction of [Cp*2Ru2S4] with [W(CO)3(MeCN)3]

Thermal and photochemical interconversion occurs between the isomeric pair of tetrathiotungstate [WS₄]²⁻ clusters 1 and 2 , which were formed by thermolysis of [Cp^*₂Ru₂S₄] and [W(CO)₃(MeCN)₃] [Eq. (1)] and then structurally characterized. During synthesis, a dramatic redistribution of ligands between the Ru and W atoms takes place without the loss of any CO and S ligands.     

几种螯合剂解镍致小鼠胰脏毒作用比较

小鼠腹腔注射氯化镍溶液(5 mg Ni/kg)染毒，观察了N-苯甲基-D-葡糖氨基二硫代甲酸钠(BGD)、二乙氨基二硫代甲酸钠(DDTC)、二羟乙氨基二硫代甲酸钠(DHED)及meso-2，3-二巯基丁二酸钠(DMSA)等螯合剂对镍致小鼠胰脏毒性的解毒作用。镍染毒后引起小鼠胰脏胰蛋白酶活性升高和羧肽酶A活性降低以及组织中镍、钙、锌浓度增加；镍染毒30 min和24 h后进行各螯合剂治疗(剂量均为400 μmol/kg)，BGD、DDTC和DMSA可明显抑制上述变化，其中BGD解镍毒效果最好、自身毒性最小、对镍致小鼠胰脏毒性有更好的解毒作用。     

应用单细胞微凝胶电泳技术研究氯化镉对人血淋巴细胞DNA的损伤效应

详细介绍了单细胞微凝胶电泳（ＳＣＧ）技术的原理和操作过程，并应用该技术研究了氯化镉（ＣｄＣｌ２）对人血淋巴细胞ＤＮＡ的损伤效应，结果表明，ＣｄＣｌ２能引起细胞ＤＮＡ迁移长度增加，且呈显著的剂量效应关系，对未处理对照细胞的ＤＮＡ迁移的原因及ＳＣＧ实验操作过程中应注意的事项也进行了讨论。     

微波辐射法合成α-萘甲醚的研究

用微波辐射法合成α－萘甲醚，考察了不同条件对产率的影响，此法反应时间短，产率可达75％。     

On the Reactivity of Silver Electrodes in a Chlorine Radiofrequency Plasma — Plasma Oxidation vs. Thermal Oxidation

The plasma‐electrochemical growth of an ion‐conducting film by the oxidation of a metal in an electronegative plasma is investigated and compared with results from thermal oxidation. As model system we studied the oxidation kinetics of silver electrodes in a Cl₂ rf plasma. The electrochemical control of the reaction by external currents through the product layer using the plasma as a fluid electrode was achieved. Both potentiostatic and galvanostatic control of the reaction was applied. The morphology of the product layer and its temporal evolution was investigated using SEM. A formation of silver chloride surface patterns in the oxidation process takes place if a simple stability criterion is not fulfilled. Specific surface morphologies were found under different experimental conditions. The morphology of the product layer is influenced by the external electric current and the substrate temperature. The influence of the plasma phase on the thermodynamics and kinetics of the oxidation process is discussed. The role of excited plasma species, the electrical charging of the surface and radiation from the plasma are taken into account.     

On the difference between hydrogen fluoride and hydrogen chloride crystals

The geometrical and energetical parameters of hydrogen fluoride and hydrogen chloride crystals are calculated using the periodic Hartree–Fock method with 6-31G and 6-31G(d,p) basis sets. The comparison of the stabilisation energies reveals that HCl crystals are about 75% less stable than HF crystals. The activation energy for collective proton movements are computed and discussed in view of data of isolated infinite chains. The barriers of 13.1 and 40.0 kcal mol⁻¹ at 6-31G(d,p) level are found for HF and HCl crystals.     

Renewable sol-gel carbon ceramic electrodes modified with a Ru-complex for the amperometric detection of l-cysteine and glutathione

A renewable three-dimensional chemically modified carbon ceramic electrode containing Ru [(tpy)(bpy)Cl] PF₆ was constructed by sol-gel technique. It exhibits an excellent electro-catalytic activity for oxidation of l-cysteine and glutathione at pH range 2-8. Cyclic voltammetry was employed to characterize the electrochemical behavior of the chemically modified electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for l-cysteine and glutathione by hydrodynamic amperometry. Optimum pH value for detection is 2 for both l-cysteine and glutathione. The catalytic rate constants for l-cysteine and glutathione were determined, which were about 2.1×10³ and 2.5×10³ M⁻¹ s⁻¹, respectively. Under the optimized condition the calibration curves are linear in the concentration range 5-685 and 5-700 μM for l-cysteine and glutathione determination, respectively. The detection limit (S/N=3) and sensitivity is 1 μM, 5 nA/μM for l-cysteine and 1 μM, 7.8 nA/μM for glutathione. The relative standard deviation (RSD) for the amperogram's currents with five injections of l-cysteine or glutathione at concentration range of linear calibration is <1.5%. The advantages of this amperometric detector are: high sensitivity, good catalytic effect, short response time (t<3 s), remarkable long-term stability, simplicity of preparation and reproducibility of surface fouling (RSD for six successive polishing is 3.31%). This sensor can be used as a chromatographic detector for analysis of l-cysteine and glutathione.     

Solid phase extraction of gold by sorption on octadecyl silica membrane disks modified with pentathia-15-crown-5 and determination by AAS

A simple and selective method for rapid and efficient concentration and determination of μg l⁻¹ levels of Au(III) ions in aqueous solution using octadecyl silica membrane disks modified by pentathia-15-crown-5 and flame atomic absorption spectrometry is presented. The influence of flow rates of eluent and sample solution, amount of ligand, types and least amount of eluent for elution of Au from disks were investigated. Break through volume and limit of detection of the membrane disks modified by 5 mg of the thiacrown ether was found to be 2.0 l and 1.0 μg l⁻¹, respectively. The effects of various cationic interferences on percent recovery of gold were studied. The method was successfully applied for the determinations of gold in some pharmaceutical samples and for the recovery of trace Au³⁺ ions from synthetic and water samples.