Operando XAFS on Hydrated Calcium Vanadium Bronze Cathode for Aqueous Zn-ion Storage

Multivalent ion storage and aqueous electrochemical systems continue to build interest for energy application. The Zn-ion system with 2 electron transfer and an ideal metal anode is a strong candidate but is still at the early stage of development. Using both in situ near-edge (XANES) and X-ray absorption fine structure spectroscopy, EXAFS, a nanostructured cathode material, Ca_xV₂O₅-H₂O (CVO), was probed at the V-K absorption edge. This operando study reveals the local electronic and geometric structure changes for CVO during galvanostatic cycling as the active material in an aqueous Zn-ion cell. The XANES data provides a fine resolution to track the evolution of the vanadium oxidative state and near-neighbor coordination sphere showing subtle shifts and delocalized charge. The Zn-ion influence on the V-K absorption edge is visualized using a difference technique called Δμ. Coupled with theoretical calculations and modelling, the extended region extracted local bonding information further confirms excellent electronic and structural reversibility of this vanadium oxide bronze in an aqueous Zn-ion electrochemical cell.     

Submicron carbon-based hybrid nano-pour-point depressant with outstanding pour point depressant and excellent viscosity depressant

We have investigated the effective utilization potential of carbon nanomaterials in the field of pour point depressants, and reported three kind of carbon-based hybrid nano-pour-point depressants with different dimensions. In this paper, poly-α-olefins-acrylate high-carbon ester pour point depressant (PAA-18) was prepared by esterification and polymerization as the basic pour point depressant. Then, the basic pour point depressant PAA18 was modified by solvothermal method with graphene oxide (GO), carbon nanospheres (Cna) and carbon nanotubes (OCNTs). The morphology and structure of the composites were analyzed by SEM, FTIR and XRD. The results showed that PAA18 was successfully in situ polymerized on GO, Cna and OCNTs. We took the simulated oil as the experimental object, and evaluated its pour point, rheological properties and wax crystal morphology, and achieved excellent results. In the three carbon-based hybrid nano-pour-point depressants with different carbon contents, the oxidation carbon nanotubes composite pour point depressant (PAA18-1 % OCNTs) with carbon content of 1 % had the best pour point and viscosity reduction effect when the dosage was 1250 ppm, which could make the pour point of the simulated oil containing wax decrease by 16 °C. PAA18-1 % OCNTs reduced the pour point by 5 °C more than PAA18. This paper provides reference for the application of carbon nanomaterials in the field of pour point depressant.     

Dielectric properties of tetragonal tungsten bronze films deposited by RF magnetron sputtering

Tetragonal tungsten bronze (TTB) films have been synthesised on Pt(111)/TiO₂/SiO₂/Si substrates from Ba₂LnFeNb₄O₁₅ ceramics (Ln = La, Nd, Eu) by RF magnetron sputtering. X-ray diffraction measurements evidenced the multi-oriented nature of films with some degrees of preferential orientation along (111). The dependence of the dielectric properties on temperature and frequency has been investigated. The dielectric properties of the films are similar to those of the bulk, i.e., ε ∼150 and σ ∼10⁻⁶ Ω⁻¹ cm⁻¹ at 1 MHz and room temperature. The films exhibit two dielectric anomalies which are attributed to Maxwell Wagner polarization mechanism and relaxor behaviour. Both anomalies are sensitive to post-annealing under oxygen atmosphere and their activation energies are similar E_a ∼0.30 eV. They are explained in terms of electrically heterogeneous contributions in the films.     

An Unusual Triphenylphosphine Oxide Catalyzed Stereoselective 1,3‐Dichlorination of Unsaturated Ketoesters

An unusual Ph₃PO‐catalyzed stereoselective 1,3‐dicholorination of an unsaturated ketoester has been developed. The novel activation mode involved in this cascade reaction can promote consecutively elusive transformations. The products were obtained with good yields and excellent stereoselectivities. This reaction makes important complementation to the limitations associated with the field of dichlorination.     

ZnAl2O4 SiO2纳米复合催化剂用于无溶剂条件下乙酸酐与醇、酚和胺的乙酰化反应简

A ZnAl₂O₄@SiO₂ nanocomposite was prepared from metal nitrates and tetraethyl orthosilicate by the sol-gel process, and characterized by X-ray diffraction, Fourier transform infrared, transmission electron microscopy, and N₂ adsorption-desorption measurements. The nanocomposite was tested as a heterogeneous catalyst for the acetylation of alcohols, phenols, and amines under solvent-free conditions. Under optimized conditions, efficient acetylation of these substrates with acetic anhydride over the ZnAl₂O₄@SiO₂ nanocomposite was obtained. Acetylation of anilines and primary aliphatic amines proceeded rapidly at room temperature, while the reaction time was longer for the acetylation of alcohols and phenols, showing that an amine NH₂ group can be selectively acetylated in the presence of alcoholic or phenolic OH groups. The catalyst can be reused without obvious loss of catalytic activity. The catalytic activity of the ZnAl₂O₄@SiO₂ nanocomposite was higher than that of pure ZnAl₂O₄. The method gives high yields, and is clean, cost effective, compatible with substrates having other functional groups and it is suitable for practical organic synthesis.     

高效可回收多相催化剂SiO_2-Cu_2O催化伯胺和仲胺苄基化反应(英文)

A mild,effective,and selective procedure is reported for the mono N-benzylation and N,N-dibenzylation of primary amines as well as mono N-benzylation of secondary amines using silicasupported copper(I) oxide in water.The silica-supported Cu2O was generated in situ by the reaction of Fehling solution and glucose at 100 °C onto activated silica.The catalyst was filtered,washed with water,and oven-dried,and was characterized by Fourier transform infrared spectroscopy,thermogravimetric analysis,scanning electron microscopy,transmission electron microscopy,and atomic absorption spectroscopy.The prepared Cu2O-SiO2 was found to be thermally stable up to 325 °C.The copper was uniformly distributed onto the surface of the silica,and the mean particle diameter was 7 nm.The catalyst served as a selective heterogenous catalyst for the N-benzylation of primary and secondary amines.The catalyst is recyclable and was used effectively upto fifth run without a significant loss of catalytic activity.Various reaction solvents including water,acetonitrile,and toluene were screened for N-benzylation of amines,and the success of the aqueous system highlights the low environmental impact of the procedure.     

Why Boron Nitride is such a Selective Catalyst for the Oxidative Dehydrogenation of Propane

Boron‐containing materials, and in particular boron nitride, have recently been identified as highly selective catalysts for the oxidative dehydrogenation of alkanes such as propane. To date, no mechanism exists that can explain both the unprecedented selectivity, the observed surface oxyfunctionalization, and the peculiar kinetic features of this reaction. We combine catalytic activity measurements with quantum chemical calculations to put forward a bold new hypothesis. We argue that the remarkable product distribution can be rationalized by a combination of surface‐mediated formation of radicals over metastable sites, and their sequential propagation in the gas phase. Based on known radical propagation steps, we quantitatively describe the oxygen pressure‐dependent relative formation of the main product propylene and by‐product ethylene. Free radical intermediates most likely differentiate this catalytic system from less selective vanadium‐based catalysts.     

Enzyme-free and DNA-based universal platform for the construction of various logic devices based on graphene oxide and G-quadruplex

In the fields of biocomputing and biomolecular, DNA molecules are applicable to be regarded as data of logical computing platform that uses elaborate logic gates to perform a variety of tasks. Graphene oxide (GO) is a type of novel nanomaterial, which brings new research focus to materials science and biosensors due to its special selectivity and excellent quenching ability. G-quadruplex as a unique DNA structure stimulates the intelligent application of DNA assembly on the strength of its exceptional binding activity. In this paper, we report a universal logic device assisted with GO and G-quadruplex under an enzyme-free condition. Integrated with the quenching ability of GO to the TAMRA (fluorophore, Carboxytetramethylrhodamine) and the enhancement of fluorescence intensity produced by the peculiar binding of G-quadruplex to the NMM (N-methylmesoporphyrin IX), a series of basic binary logic gates (AND. OR. INHIBIT. XOR) have been designed and verified through biological experiments. Given the modularity and programmability of this strategy, two advanced logic gates (half adder and half subtractor) were realized on the basis of the same work platform. The fluorescence signals generated from different input combinations possessed satisfactory results, which provided proof of feasibility. We believe that the proposed universal logical platform that operates at the nanoscale is expected to be utilized for future applications in molecular computing as well as disease diagnosis.     

Defluoridation in aqueous solution by a composite of reduced graphene oxide decorated with cuprous oxide via sonochemical

The World Health Organization (WHO) has recommended the fluoride level in drinking water (1.5 mg/L) and defluoridation of water is an essential to remove of fluoride from contaminated water. Hence, the effective and rapid adsorbent Cuprous oxide-reduced graphene oxide (Cu₂O-RGO) composite was developed to overwhelm this concern. Sonochemical approach was adopted for the synthesis of desirable composite which was further characterized by XRD, FTIR, SEM, and EDS. The optimized composite (30 mg) shown the significant adsorption capacity of 34 mg/g of F⁻ solution (pH = 9), 70% removal of F⁻ solution from real experiment and Freundlich model was fitted than Langmuir and Temkin isotherms. The experimental results corroborate that adsorbent is the most effective for removal of fluoride from its polluted water.