Crystal structure and single crystal EPR of (NH_4)_2(15-crown-5)_3[Cu(mnt)_2] and (NH_4)_2(benzo-15-crown-5)_4[Cu(mnt)_2]·0.5H_2O

The X-ray crystal structures of (NH4)2(15-crown-5)3[Cu(mnt)2] (1) and (NH4)2(benzo-15-crown-5)4- [Cu(mnt)2]·0.5H2O (2) were determined. Two single crystals are composed of distinct structures of ammonium-crown ether supramolecular cation and [Cu(mnt)2]2? anion. The triple-decker dication in complex 1 and a sandwich dimmer in complex 2 were observed. X-Band EPR studies on the single crystals of both complex 1 and complex 2 have been carried out at room temperature, which revealed that complex 2 showed a perfect hyperfine structure of Cu whereas that of complex 1 could not be observed. The principal values and direction cosines of the principal axes of the g and A tensors were computed by a least-squares fitting procedure. The spin density of Cu(II) was estimated according to the principal values of the A tensors and compared well with the results calculated based on DFT method.     

Correlation of antioxidant depletion and mechanical performance during thermal degradation of an HTPB elastomer

Thermal degradation studies of a stabilized HTPB based elastomer were conducted at temperatures from 50 °C to 110 °C. The concentration of extractable antioxidant (AO2246) in the polymer was quantified via AO extraction and a gas chromatography-based method using internal standards. The decrease in extractable AO levels as a function of time and temperature was evaluated and correlated with mechanical property changes. Most importantly, AO depletion features were found to be temperature dependent. At elevated temperatures (>80 °C) extractable AO levels decreased rapidly and faster than the concurrent loss in mechanical properties. While extractable AO concentrations decrease quickly, the material is able to maintain some useful mechanical properties, perhaps via non-extractable or grafted AO species formed during degradation providing additional protection. At lower aging temperatures extractable or free AO levels decreased more slowly than the mechanical properties. Therefore, for condition monitoring purposes a universal correlation between AO levels and aging state or material condition could not be established. Most importantly, however, loss of mechanical properties and oxidative degradation is observed at lower temperatures despite significant levels of free antioxidant in the material. The antioxidant appears to be limited in its effectiveness to completely prevent degradation reactions, or only fractions of the total AO available are actually involved in the inhibition process.     

Spectroscopic and quantum chemical studies on the structure of 2-arylquinoline-4(1H)-thione derivatives

The geometries of the title compounds were probed in solution, solid and gas states using spectroscopic methods, X-ray crystallography and quantum chemical techniques. The exclusive existence of the NH-4-thiones in solution (NMR and PCM-B3LYP(MP2)/6-31+G(d) calculations) and solid state (FT-IR and X-ray) is also corroborated by comparison of their spectroscopic data with those of the corresponding 2-aryl-1-methylquinoline-4(1H)-thione derivatives. The co-existence of the quinoline-4-thione and quinoline-4-thiol (4-mercaptoquinoline) isomers in the gas phase is confirmed by mass spectrometry and the preponderance of the 4-thiol is supported by quantum chemical techniques (PM3, MP2 and B3LYP).     

Synthesis of 8-vinyladenosine 5′-di- and 5′-triphosphate: evaluation of the diphosphate compound on ribonucleotide reductase

The synthesis of 5′-di- and 5′-triphosphate of 8-vinyladenosine to be tested on ribonucleotide reductases requires the modification of known methods. The phosphate group was introduced by treatment with an in situ generated chlorophosphite. Protection of the 2′,3′ diol with acetyl groups suppressed depurination during acid removal of the phosphotriester protecting groups. The di- and triphosphate compounds were obtained by treatment of the activated adenylic acid with phosphate or pyrophosphate anions followed by removal of the acetate protecting groups. Preliminary studies were conducted on Escherichia coli ribonucleotide reductase and have shown that the diphosphate compound is efficiently reduced.     

Average electron momenta in many-electron atoms

In many-electron atoms, the average electron momentum p represents the mean momentum of a single electron when all the electron motions are averaged. If any two electrons are considered simultaneously, however, the average momentum p splits into two different momenta, low momentum p_< and high momentum p_>. For the 102 atoms He through Lr in their ground states, the momenta p_< and p_> are systematically examined at the Hartree–Fock limit level. It is also shown that the sum p_>+p_< and the difference p_>–p_< of the two momenta constitute upper and lower bounds to the electron-pair relative momentum p₁₂=|p₁–p₂| and to the electron-pair center-of-mass momentum P=|p₁+p₂|/2. The tightness of the bounds is discussed for the 102 atoms.     

Study on the Binding Effect between Cordycepin and Calf Thymus DNA by Circular Dichroism

DNA works as hereditary material and plays vital role in life science. The study of the binding of small molecules complex to DNA has been the focus of intense investigation, owning to their stereo and sequence specific interaction with the double helix1-…     

Simultaneous Determination of Triptolide and Tripdiolide in Extract of Tripterygium wilfordii Hook. f. by LC–APCI-MS

A novel method using liquid chromatography coupled with atmospheric pressure chemical ionization mass spectrometry in the negative selected ion monitoring mode has been developed and validated for rapid simultaneous determination of triptolide and tripdiolide in the extract of Tripterygium wilfordii Hook. f. The molecular ions m/z [M–H]⁻ 359 and 375 were selected for the quantification in selected ion monitoring mode for triptolide and tripdiolide. Standard calibration curve was linear over the concentration range of 0.12–24 and 0.15–30 μg mL⁻¹ for triptolide and tripdiolide. The relative standard deviations of intra- and inter-day were in the range of 4.7–9.9 and 8.9–12.6%. The average recoveries were between 96.4 and 104.6%. The limits of quantitation were 2.0 × 10⁻³ and 2.5 × 10⁻³ μg mL⁻¹ for triptolide and tripdiolide.     

Determination of aliphatic amines in air by membrane enrichment directly coupled to a gas chromatograph

Summary A method is described for the determination of shortchain aliphatic amines in ambient air based on impinger sampling in dilute H₂SO₄, selective enrichment across a PTFE gas membrane and quantification by gas chromatography. The enrichment step is carried out in a flow system directly connected to the chromatograph. The separation is performed on a packed column with nitrogen selective detection. The enrichment per sample volume was in the range 7.3 to 8.2 mL^–1 for C₁–C₆ amines. Detection limits were ca 3–10 nM with enrichment of a 2.9 mL liquid sample. After impinger sampling of 5 m³ air in 10 mL absorption solution, this corresponds, to 0.4–0.8 ng/m³ (ca 0.2–0.5 ppt by volume) in air.     

Reaction of Pyrimidinonethione Derivatives: Synthesis of N‐Methyl‐2‐Hydrizinopyrimidine‐4‐One,Thiazolo[3,4‐b] N‐Methylpyrimidinone; 2‐(1‐Pyrazolonyl) N‐Methylpyrimidine‐4‐one and 2‐Hydrazino‐N‐Methyl Pyrimidine‐4‐One Derivatives

6‐Aryl‐5‐cyano‐4‐pyrimidinone‐2‐thion derivatives 1a‐c reacted with methyl iodide (1:2) to give the corresponding 2‐S,N‐dimethyl pyrimidine‐4‐one derivatives 2a‐c . Compounds 2a‐c were in turn, reacted with hydrazine hydrate to give the sulfur free reaction products 3a‐c . These reaction products were taken as the starting materials for the synthesis of several new heterocyclic derivatives. Reaction of 3a‐c with acetic anhydride and formic acid gave pyrimido triazines 4a‐c and 7a‐c , respectively. Their reactions with active methylene containing reagents gave the corresponding 2‐(1‐pyrazonyl)‐N‐methyl pyrimidine derivatives 9a‐c and 10a‐c , respectively. Their reactions with aromatic aldehydes afforded the corresponding 2‐hydrazono pyrimidine derivatives 11a‐c . The structure of these reactions products were established based on both elemental analysis and spectral data studies.     

Fluoropolyethers end‐capped by polar functional groups. IV. A novel approach to the evaluation of reactivities of hydroxy‐terminated ethoxylated fluoropolyethers in the tin(IV)‐catalyzed reactions with isophorone diisocyanate

The effect of catalyst dibutyltin dilaurate (DBTDL) on the kinetics of urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Fomblin® Z‐DOL TXs (FPEs) of various molecular weights and poly(oxyethylene) glycol PEG‐400 with isophorone diisocyanate (IPDI) in hexafluoroxylene (HFX) and tetrahydrofuran (THF) at 40 °C and NCO:OH = 2:1 have been studied in a broad range of catalyst (0.10–9.00) ×10^?4 M and total reagents (10.0–60.1 wt %) concentrations. The rate of tin‐catalyzed second‐order reactions (with respect to diol and diisocyanate) was found to be proportional to the square root of catalyst concentration [DBTDL]^0.5 both in low polar (HFX) and polar (THF) solvents. Effect of catalyst saturation was revealed for all the reaction systems at higher DBTDL concentrations as well as the appearance of the limiting catalyst concentrations C_lim below which the rates of reaction were close to zero. Based on these findings new effective rate coefficients have been derived k = k_cat/(C ? C) that are independent of the total reagent concentration in the range of 10.0–60.1 wt % ([OH] = 0.10–0.91 equiv/L). This new approach highlights that the rate of the tin‐catalyzed urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Z‐DOL TXs with IPDI in HFX at 40 °C and NCO:OH = 2:1 increases significantly with increasing MW of FPE from 776 up to 3405. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5354–5371, 2004