Preparation and evaluation of a large-volume radial flow monolithic column

In this study, a 38 mL monolith with homogeneous porous structure was produced by a single polymerization from glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) in the presence of porogens and an initiator. The uniform temperature distribution within the reaction system was achieved by adding reactant mixture continuously and enhancing the heat transfer ability of the polymerization system. Homogeneous porous structure in the monolith was proved by SEM and the pore size distribution profiles measured by mercury intrusion porosimetry. Experimental results from proteins separation indicated that the dynamic capacity and resolution of radial flow monolithic column were independent of flow rates. Furthermore, the pressure drop on the column was linearly dependent on the flow rate and did not exceed 1.7 MPa even at a flow rate of 50 mL/min, which proved that the prepared monolith could be used in the quick separation and preparation of biopolymers.     

Flow-Cell Fibre-Optic Enzyme Sensor for Phenols

Abstract

A solid-state fibre-optic luminescent oxygen sensor was used for flow-through measurements. It acts as a transducer in a new flow-cell enzyme sensor arrangement. This arrangement comprises a flow path, sample injector, microcolumn with the immobilized enzyme, oxygen membrane and fibre-optic connector joined together to form an integral unit. Laccase enzyme was used as a recognition system which provided specific oxidation of the substrates with the dissolved oxygen being monitored. The assay procedure was optimized and performance of the new system studied. The sensor was applied to the determination polyphenol content in tea, brandy, etc. (quality control test). The sensitivity to some important phenolic compounds was tested with the view of industrial wastewater control applications.     

Temperature-response polymer coating for in-tube solid-phase microextraction coupled to high-performance liquid chromatography

The silica nanoparticle (SiO₂ NP)-deposited capillary fabricated by liquid phase deposition (LPD) was bonded by 3-(triethoxysilyl) propyl methacrylate and then modified with poly(N-isopropylacrylamide) (PNIPAAm) by polymerization. The resulting PNIPAAm modified SiO₂ NP-deposited capillary was applied to in-tube solid-phase microextraction coupled to high-performance liquid chromatography (in-tube SPME-HPLC). To investigate the extraction performance of the prepared capillary, diethylstilbestrol (DES) with moderate polarity was selected as the model analyte. Results demonstrate that PNIPAAm modified SiO₂ NP-deposited capillary exhibited obvious temperature responsive character. Finally, the PNIPAAm modified SiO₂ NP-deposited capillary was applied to the analysis of three synthetical estrogens from milk samples. The detection limit of the method was found to be in the range 1.2-2.2 ng/g, and recovery was 71.7-98.9% with relative standard deviations in the range of 2.8-12.6%.     

A comparison of measured room acoustics metrics using a spherical microphone array and conventional methods

The traditional microphone configuration used to measure room impulse responses (IRs) according to ISO 3382:2009 is an omnidirectional and figure-8 microphone pair. IRs measurements were taken in a 2500-seat auditorium to determine how the results from a spherical microphone array (an mh acoustics Eigenmike-em32) compare to those from the traditional microphone setup (a Brüel & Kjær Type-4192 omnidirectional microphone and a Sennheiser MKH30 figure-8 microphone). Measurements were obtained at six receiver locations, with three repetitions each in order to first evaluate repeatability. The metrics considered in this study were: reverberation time (T30), early decay time (EDT), clarity index (C80), strength (G), lateral energy fraction (J_LF) and late lateral energy level (L_J). Before calculating these quantities, the IRs were filtered to equalize the frequency response of the microphones and sound source. For the spherical array measurements, the omnidirectional (monopole) and figure-8 (dipole) patterns were extracted using beamforming. In terms of repeatability, the average standard deviation of the three measurements at each receiver location averaged across all metrics, receivers, and octave bands was found to be 0.01 just noticeable differences (JNDs). The analysis comparing the measurements from the two microphone configurations yielded differences which were less than 1 JND for the majority of metrics, with a few exceptions of EDT and C80 slightly above 1 JND. Based on this case study, these results indicate that spherical microphone arrays can be used to obtain valid room IR measurements, which will allow for the development of new metrics utilizing the higher spatial resolution made possible with spherical arrays.     

The effect of hydrostatic pressure,temperature and magnetic field on the nonlinear optical properties of asymmetrical Gaussian potential quantum wells

In this study, simultaneous effects of hydrostatic pressure, temperature and magnetic field on the linear and nonlinear intersubband optical absorption coefficients (OACs) and refractive index changes (RICs) in asymmetrical Gaussian potential quantum wells (QWs) are theoretically investigated within the framework of the compact-density-matrix approach and iterative method. The energy eigenvalues and their corresponding eigenfunctions of the system are calculated with the differential method. Our results show that the position and the magnitude of the resonant peaks of the nonlinear OACs and RICs depend strongly on the hydrostatic pressure, temperature and external magnetic field. This gives a new degree of freedom in various device applications based on the intersubband transitions of electrons.     

Temperature effect on threshold voltage and optical property of twisted nematic liquid crystal with applied different voltages

In this paper, temperature-dependent birefringence theory of liquid crystal is used to investigate the temperature effect on the threshold voltage. An expression for describing the non-linear relationship between the threshold voltage and temperature is deduced. In addition, we theoretically discuss the temperature effect on the transmitted ratio of the namatic twisted liquid crystal without the applied voltage and with the applied voltage. It is found that the transmitted ratio is decreased linearly as temperature is increased when the liquid crystal is not applied with voltage, but the transmitted ratio is increased linearly as temperature is increased when the liquid crystal is applied with voltage. The threshold voltages and the transmitted ratio are measured at different temperatures. The experimental data are consistent with the theoretical calculated results.     

Theoretical calculation of the temperature coefficient of surface excess entropy of pure liquid metals

The temperature coefficient of surface excess entropy dS_s/dT of pure liquid metals (Al, Ga and Bi) has been calculated in the framework of Skapski's nearest-neighbor interaction-broken-bond model. It is found that this coefficient varies by 47.2%, 69% and 85% for pure liquids Al, Bi and Ga, respectively, in the temperature range between the melting temperature T_m and T_m + 400 K. The value of the coefficient for pure liquid Ga is an order of magnitude larger than that of Al and Bi. The largest increase in dS_S/dT with temperature occurs in the first 100 K away from T_m, being the largest for liquid Ga which is about 43%. This variation is experimentally inaccessible and therefore lacking in the literature and has never been reported.     

Estimating the mixing time of concert halls using the eXtensible Fourier Transform

In room acoustics, we measure room impulse responses (RIRs) in order to fully describe the hall. RIRs are composed of a succession of arrivals (i.e., some sound rays which have undergone one or more reflections on their way from the source to the receiver). We propose the eXtensible Fourier Transform (XFT) in order to investigate the time evolution of spectral components of RIRs. The phase evolution versus time allows to estimate the mixing time, which is defined as the time it takes for initially adjacent sound rays to spread uniformly across the room. After presenting some properties of the XFT, we show why one must compensate the natural energy decay of the RIR in order to obtain stationary signals. We estimate mixing times for a set of experimental RIRs and several that are synthesized using a stochastic model. Then, we estimate the dependance of mixing time upon the source/receiver distance in all these RIRs. Results are consistent up to the lack of reproducibility of the sound sources, but are strongly dependent on some parameters used for computing the XFT. We finally discuss the relevance of the name mixing time with respect to the theory and in regard to the time we estimate, that we propose to call cross-over time.     

Orbital relaxation effects on temperature diagnostics of mid-Z plasmas

The orbital relaxation effect was studied in the calculations and diagnostics of the L-shell absorption spectra (2p→3d,4d,5d) of iron and bromine plasmas. A detailed level accounting model was developed to calculate the huge number of L-shell absorption lines of the two typical mid-Z plasmas. The orbital sets were generated by the optimizations according to the initial and final states, respectively. It was found that the L-shell line positions agree with the experimental iron and bromine spectra better when the orbital relaxations were included in calculations. Since experimental mid-Z spectra have few detailed line structures, calculations without considering orbital relaxations may misinterpret the spectra and consequently lead to underestimations of the plasma temperatures.     

不同进风型式下气体冷却服中空气流动与换热的研究

根据气体冷却服的特点,对不同进风型式下气体冷却服中空气流动与换热进行研究。建立了进气口加设挡板层、进气口带均流器型和直吹型3种型式气体冷却服(服装夹层)中冷却空气流动过程的数学模型。对气体的流动过程进行分析,结果表明:不同的进风型式对气体冷却服空气层的温度分布状况、平均气流流速、平均温度、对流散热量影响较大;其中进气口加设挡板层的服装空气夹层温度分布最均匀,进气直吹型的平均气流流速最大,对流散热效果最好。研究结果为气体冷却服进一步的布风优化设计提供了理论和应用依据。