载溴树脂溴化酚类的研究

用简便方法制备得载溴树脂并用于酚类的溴化,当采用不同摩尔比的载溴树脂时,有选择地得到一溴、二溴及三溴代物,并有较高的产率,同时该树脂具有良好的稳定性。     

新型L-羟脯氨酸聚合物键合手性固定相的制备及对手性化合物的拆分

以单分散亲水性交联聚甲基丙烯酸环氧丙酯-甲基丙烯酸乙二醇双酯(PGMA/EDMA)树脂为载体,制备新型L-羟脯氨酸聚合物键合高效手性配体交换固定相。该固定相在配体交换分离模式下,以0.2mol/LNaAc和0.1mmol/LCu(Ac)2水溶液(pH5.2)为流动相,柱温为30℃～50℃,对衍生和非衍生的D,L-氨基酸和α-羟基酸等9种手性化合物进行了高效液相色谱拆分。详细考察了流动相pH值、温度、流速和进样量对手性分离的影响,选择了合适的色谱分离条件。结果表明,所拆分的9种手性化合物,有5种手性化合物能得到基线分离,最好的分离因子α=2.32。     

Thermally stimulated depolarization current of novolac resin

A novolac phenol-formaldehyde resin was investigated via the thermally stimulated depolarization current, using integral and partial measurements in the temperature range from 137 to 270 K. Tow broadened peaks, assigned as Β₁, and Β₂, appeared at about 160 and 190 K. The influence of water and ¯M_n was investigated. The activation energy E_a vs. T relationship was analysed, and a search was made for compensation phenomena. The distribution of the relaxing dipolesN vs. E_a was approximated. Three different relaxation ranges were distinguished. All the motions were attributed to the rotation of the phenyl rings. The differences found are due to the heterogeneity in the resin. Contamination with water increases the polarizability, decreases the structure differences and relieves the motions in the resin. A resin with a smaller ¯M_n exhibits a higher polarizability and a decreases in structure variety.     

4-Amino-l,2,4-triazole Resin-supported Palladium Complex as Phosphine-free Catalyst for Suzuki Reaction in Aqueous Phase

1 Introduction The Suzuki cross-coupling reaction is a powerful and versatile method for the generation of unsymme-trical biaryls from arylboronic acids and aryl halides in a single step~([1-3]).However,the reaction is usually performed in the presence of Pd catalyst along with phosphine ligand,which sometimes creates practical problems because organophosphines tend to be expensive,poisonous,and air sensitive.Recently,phosphine-free ligands,such as nitrogen or sulfur-containing ligands~([4-6]) and N-heterocyclic car-benes~([7-12]) have been applied in Suzuki reaction effectively.     

Chitosan functionalized with di-2-propanolamine: Its application as solid phase extractant for the determination of germanium in water samples by ICP-MS

Cross-linked chitosan was chemically modified with di-2-propanolamine via an arm of chloromethyloxirane (CCTS-DPA resin). The adsorption behavior of the resin towards 62 elements was examined using a mini-column pretreatment method, and the collected elements were eluted with 1 mol L^− 1 nitric acid before measurement by inductively coupled plasma-mass spectrometry (ICP-MS).The CCTS-DPA resin can adsorb several metal cations and several oxoanionic elements at appropriate pH. However, di-2-propanolamine (DPA) attached to cross-linked chitosan (CCTS) showed excellent ability and selectivity for the adsorption of germanium at pH 6 to 9. The adsorption capacity of the resin for germanium (IV) was found to be 106 mg g^− 1 resin, whereas the adsorption rate constant was 9.82 × 10^− 2 min^− 1. Through the column treatment, alkali and alkaline earth matrices in river water and seawater matrices could be completely removed. The resin can also successfully remove chloride and selenium that can interfere with the direct determination of germanium by ICP-MS. The applicability of the CCTS-DPA resin was further demonstrated for the collection/preconcentration of germanium in environmental water samples and its determination by ICP-MS. The concentrations of germanium in tap water, river water and seawater samples were found in the range of 0.011 to 0.022 μg L^− 1.     

Phenolic resin as a carbon source for the synthesis of monometallic Mo and bimetallic CoMo carbides via carbothermal reduction route

It was the first time that phenolic resin (PR) was used as a carbon source for the synthesis of nanostructured monometallic Mo and bimetallic CoMo carbides via carbothermal reduction route. The results showed that phase-pure β-Mo₂C can be formed under an Ar atmosphere at 900°C or a H₂ atmosphere above 700°C. However, almost pure CoMo carbides (Co₃Mo₃C and Co₆Mo₆C) can be obtained only under a H₂ atmosphere at a low temperature of 630°C for 24 and 48 h, respectively. The role of PR in the preparation process has been investigated and a detailed formation mechanism was proposed based on the experimental results.     

Analysis of correlation between percolation concentration and elongation at break in filled electroconductive epoxy-based adhesives

Electrical conductivity and elongation at break of epoxy filled with electroconductive carbon black, graphite or with silver-coated basalt particles or fibres were investigated in this paper. Percolation concentrations were determined to be 14 vol% for epoxy/carbon black composites, 22 vol% for epoxy/graphite composites, 28-29 vol% for both epoxy/silver-coated basalt particles and fibres. The steepest increase in electrical conductivity and the most pronounced decrease in elongation at break occurs at similar filler concentration range for all investigated systems. A good correlation between phenomenological model, introduced in [J. Mater. Sci. Lett. 18 (1998) 1457] and experimental data for all investigated systems was observed.     

一种含磺酸酯基亲和性变化树脂的合成及其热分解性能研究

本实验合成了一系列含p-苯磺酸异丙酯基亲和性变化的二元、三元共聚物,并对其结构、聚合特征f1-F1曲线以及热分解性能进行了研究.对共聚物的DSC测试发现,随着p-苯磺酸异丙酯基含量的增加,树脂中磺酸酯基的分解温度向低温方向移动,范围在120-170℃;而磺酸酯基的分解能量随其在树脂中含量的增加而升高,范围在20-30kJ/mol.动力学研究结果显示,聚合物中磺酸酯基的热分解过程属于自加速类型,反映了热分解产生的磺酸对磺酸异丙酯热分解过程的催化作用.加热分解后树脂水溶性的研究表明,在二元共聚物中磺酸酯基单元含量等于或大于27%,在引入羧酸基的三元共聚物中磺酸酯基单元含量为21%时,热分解后共聚物涂层表现出优良的水溶性,能够在中性水中快速、彻底溶解并脱离支持版基.     

In-situ investigations of the curing of a polyester resin

Quasi-isothermal curing of a polyester resin was studied at different catalyst concentrations and temperatures in-situ by ¹H-NMR relaxometry and NIR spectroscopy simultaneously. Sample and probe temperatures were also recorded. An autocatalytic kinetic model, optionally including a diffusion term, was successfully applied to describe and predict the curing kinetics of the polyester resin as a function of temperature and catalyst concentration, although the diffusion effect is relatively weak in the investigated system under the experimental conditions. The corresponding kinetic coefficients and the reaction activation energy were obtained by fitting the models to the data, assuming an Arrhenius relation.     

高吸水性树脂

综述了国内高吸水性树脂的研究进展,其中包括高吸水性树脂的制备方法、类型、影响其吸水性能的因素以及功能与应用。