Controlled vinyl-addition-type polymerization of norbornene initiated by several cobalt complexes having substituted terpyridine ligands

A series of cobalt(II) complexes having terpyridine derivatives such as 2,2^′:6^′,2″-terpyridine (1), 4,4^′,4″-^tBu₃-2,2^′:6^′,2″-terpyridine (2), 5,5″-Me₂-2,2^′:6^′,2″-terpyridine (3), 6,6″-Me₂-2,2^′:6^′,2″-terpyridine (4) and 6,6″-(3,5-Me₂C₆H₃)₂-2,2^′:6^′,2″-terpyridine (5) was synthesized. The structures of 1, 3, and 4 were confirmed by X-ray crystallography. The coordination sphere around the cobalt center in 1 can be described as pseudo square pyramidal. On the other hand, complex 4 has pseudo trigonal bipyramidal structure. Upon activation with d-MAO (dried-methylaluminoxane), these complexes showed high activities for the polymerization of norbornene (NBE). In particular, polymerization of NBE with 4/d-MAO system at room temperature resulted in quantitative yield within several hours to give the polymers with relatively narrow molecular weight distributions and controlled molecular weight. The polymerizations of NBE with these cobalt catalyst systems proceeded in vinyl addition polymerization, which was confirmed by ¹H NMR spectra of the resulting polymers.     

Three-dimensional photofabrication with femtosecond lasers for applications in photonics and biomedicine

A status report on rapidly advancing femtosecond laser technology, three-dimensional (3D) microstructuring by multiphoton illumination technique, is given. Taking its origin from multiphoton microscopy, this technique is now becoming an important microfabrication tool. In our work we apply near-infrared Ti:sapphire femtosecond laser pulses (at 800/780 nm) for 3D material processing. When tightly focused into the volume of a photosensitive material (or photoresist), they initiate 2PP process by, for example, transferring liquid into the solid state. This allows the fabrication of any computer generated 3D structure by direct laser “recording” into the volume of photosensitive material. 2PP of photosensitive materials irradiated by femtosecond laser pulses is now considered as enabling technology for the fabrication of 3D photonic crystals and photonic crystal templates. In particular, 2PP allows one to introduce defects at any desired locations, which is crucial for the practical applications. Recently, we studied possible applications of 2PP technique in biomedicine. 2PP is a very interesting technique for the fabrication of drug delivery systems, scaffolds for tissue engineering, and medical implants. These and other biomedical applications of 2PP will be reviewed.     

Infrared investigation of benzene to 30 GPa transformation to a polymer

Abstract

After a pressure cycle to 30 GPa, benzene transforms to a white solid which can be recovered at ambient. Results obtained from infrared spectroscopy and other physico-chemical methods show that the recovered solid is a highly cross-linked polymer. The molecular structure of benzene is very likely completely altered by the transformation.     

嵌段共聚物在乳液聚合和分散聚合中的应用

综述了嵌段共聚物在乳液聚合和分散聚合中作为稳定剂应用的进展，主要讨论了共聚物化学组成，比例，分子量，浓度以及胶束形成等因素对聚合体系的影响。     

Polymerization of 4-Dimethylamino-N-propargylpyridinium Bromide by Transition Metal Catalysts

The polymerization of an ionic propargyl derivative, 4-dimethylamino-N-propargylpyridinium bromide (DMAPPB), was carried out by palladium, platinum, and ruthenium chlorides. The polymerization of DMAPPB by these transition metal catalysts proceeded well to give a relatively high polymer yield. The chemical structure of the resulting polymer was characterized by such instrumental methods as elemental analysis, infrared, NMR, UV–visible spectroscopies to have conjugated polymer backbone system bearing 4-dimethylamino-N-methylenepyridinium bromide. The polymer was soluble in DMF, DMSO, and formic acid, and found to be less hygroscopic than those of similar homologues having more smaller substituents. The resulting polymers were mostly black powders and showed the amorphous morphology.     

An effective route for the synthesis of cationic palladium complexes of general formula [(Acac)PdLL]A

A series of palladium complexes of general formula [(Acac)PdL¹L²]⁺A⁻, where L¹, L² = phosphines and A = BF₄, CF₃SO₃, were synthesized. Preliminary studies show that the complexes are active in selective dimerization of styrene and addition polymerization of norbornene.     

本体聚合反应过程中聚甲基丙烯酸甲酯增长自由基的ESR研究

采用TM₁₁₀谐振腔和φ2mm样品管,在17℃室温条件下成功地记录了MMA本体聚合反应过程中增长自由基的ESR谱。当把DMA加入到MMA和BPO中后,立即抽取0.17ml混合液到φ2mm样品管并记谱。以后每隔2分钟记谱一次,波谱从13(5+8)条线逐渐变成9(5+4)条线。我们用阻碍振荡模型和构象重叠模型作了模拟。从全部谱图看,前者似更合理些。ESR实验表明:在聚合过程前期,自由基浓度基本保持不变,但从聚合中期的某一时刻开始,浓度剧增,它正好同步地与本体聚合反应的自加速效应相对应,而且其变化规律和单体转化率相平行。最后,我们用微波功率饱和方法观测到9线谱的协同自旋跳跃所产生的卫线,证明了主导的电子自旋晶格弛豫机理来自电子一核自旋间的偶极偶合角调制。     

Control of the temperature responsiveness of poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) copolymer using ultrasonic irradiation

Poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (poly(NIPAM-co-HEMA)) is a temperature-responsive copolymer that is expected to be applicable as an advanced functional polymeric material in various fields. In this study, a novel method was developed to control the responsive temperature of poly(NIPAM-co-HEMA) using an ultrasonic polymerization technique. Initially, the behavior of the reaction was investigated using NIPAM and HEMA monomers under ultrasonic irradiation. A high ultrasonic power was found to produce a high reaction rate and low number average molecular weight of the copolymer. The polydispersity of the synthesized copolymer was approximately 1.5 for all ultrasonic powers examined. In the early stage of the reaction, the molar fraction of NIPAM in the copolymer was lower than the initial molar fraction of the monomers. It was concluded that ultrasonic irradiation affected the initiation reaction and polymer degradation, but did not affect the propagation reaction. Furthermore, the effect of the ultrasonic irradiation conditions on the temperature responsiveness of the copolymer was investigated. The lower critical solution temperature (LCST) of the copolymer was found to increase with increasing ultrasonic irradiation time. In addition, in the early stages of the reaction, the measured values of the LCST were higher than the estimated values using copolymer composition. This can be attributed to some parts of the copolymer chain possessing a higher NIPAM fraction than the overall fraction due to different reactivities of the monomers and terminated radicals. This hypothesis was indirectly verified by the synthesis of a block copolymer from the PNIPAM homopolymer and HEMA monomer.     

Synthesis,characterization, and catalytic application of a zinc(II) complex bearing a pyrazole-based ligand

The reaction between ZnCl₂ and N,N-bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl]-1-phenylethylamine (bdmppea) affords [(bdmppea)ZnCl₂], whose structure has been determined by X-ray crystallography. The [(bdmppea)ZnEt₂] complex in situ prepared by the reaction between [bdmppea] and ZnEt₂ exhibited high activity toward the polymerization reaction of rac-lactide at room temperature. However, its activity decreased sharply with decreasing temperature. Stereospecificity of this catalyst characterized by heterotacticity (P_r) was determined by homonuclear decoupled NMR spectroscopy, which value was ∼0.58.     

One- and two-dimensional NMR studies of methyl acrylate/vinyl acetate/N-vinyl carbazole terpolymers

Terpolymers of methyl acrylate/vinyl acetate/N-vinyl carbazole (M/A/C) with different compositions were synthesized by solution polymerization using AIBN as an initiator. Composition of terpolymers was determined from quantitative ¹³C{¹H} NMR spectrum. Two-dimensional heteronuclear single quantum correlation (HSQC) and total correlated spectroscopy (TOCSY) were used to assign the methylene and methine carbon resonances by analyzing two and three bond order couplings. Various resonance signals were assigned to different compositional and configurational sequences with the help of one- and two-dimensional NMR spectra. Three and four bond order coupling between carbonyl carbon and other neighboring protons have been investigated with the help of 2D heteronuclear multiple bond correlation (HMBC) spectra. The complex and overlapped ¹H NMR spectrum of terpolymer was analyzed completely with the help of 2D HSQC and TOCSY spectra.