Phenylethenyl‐Substituted Triphenylamines: Efficient,Easily Obtainable,and Inexpensive Hole‐Transporting Materials

Star‐shaped charge‐transporting materials with a triphenylamine (TPA) core and various phenylethenyl side arm(s) were obtained in a one‐step synthetic procedure from commercially available and relatively inexpensive starting materials. Crystallinity, glass‐transition temperature, size of the π‐conjugated system, energy levels, and the way molecules pack in the solid state can be significantly influenced by variation of the structure of these side arm(s). An increase in the number of phenylethenyl side arms was found to hinder intramolecular motions of the TPA core, and thereby provide significant enhancement of the fluorescence quantum yield of the TPA derivatives in solution. On the other hand, a larger number of side arms facilitated exciton migration through the dense side‐arm network formed in the solid state and, thus, considerably reduces fluorescence efficiency by migration‐assisted nonradiative relaxation. This dense network enables charges to move more rapidly through the hole‐transport material layer, which results in very good charge drift mobility (μ up to 0.017 cm² V ^?1 s^?1).     

结晶高分子非晶区的结构及其动力学行为研究进展

非晶结构对结晶高分子材料结构和最终使用性能有非常重要的影响,但目前对半晶高分子中非晶结构的认识还不太清晰并且有待进一步完善.随着研究手段的发展,结晶高分子中非晶区结构及其动力学行为的研究受到越来越多的关注.本文简要概述了目前对结晶高分子中非晶相的研究进展,主要从结晶高分子中非晶区的结构﹑结晶高分子中非晶区的松弛行为﹑非晶相对结晶高分子性能的影响以及等温结晶过程中非晶相的结构演化这四个方面进行介绍,并对它们的研究现状进行了概述,同时指出了目前在这方面研究中存在的争议和问题.     

磷杂菲改性腰果酚多元醇的合成及阻燃聚氨酯硬泡性能

采用生物质原料腰果酚和9,10-二氢-9-氧杂-10-膦杂菲-10-氧化物(DOPO)为原料, 合成了一种磷杂菲改性腰果酚多元醇(P-Cardanol-Polyol), 并利用核磁共振氢谱和磷谱对其结构进行了表征. 利用P-Cardanol-Polyol对聚氨酯硬泡(RPUF)进行阻燃改性, 得到一系列阻燃聚氨酯硬泡. 考察了P-Cardanol-Polyol的用量对阻燃聚氨酯硬泡的形貌、 密度、 热导率、 压缩性能、 热稳定性以及阻燃性能的影响. 研究结果表明, P-Cardanol-Polyol对聚氨酯硬泡的密度影响可以忽略不计; 随着P-Cardanol-Polyol的加入, 阻燃聚氨酯硬泡的平均孔径逐渐减小, 热导率也逐渐降低. 未改性聚氨酯硬泡的最大热释放速率和总放热量分别为390 kW/m²和31.9 MJ/m², 阻燃聚氨酯硬泡则降低至340 kW/m²和24.6 MJ/m². 此外, 阻燃聚氨酯硬泡的压缩强度比未改性聚氨酯硬泡提升了约13%. 炭层分析结果表明, P-Cardanol-Polyol能够促进聚氨酯硬泡形成连续致密且具有良好抗热氧化性能的炭层, 有利于减少燃烧过程中可燃性气体的逸出, 从而提升阻燃性能.     

Improved Dermal and Transdermal Delivery of Curcumin with SmartFilms and Nanocrystals

Poor aqueous solubility of active compounds is a major issue in today’s drug delivery. In this study the smartFilm-technology was exploited to improve the dermal penetration efficacy of a poorly soluble active compound (curcumin). Results were compared to the dermal penetration efficacy of curcumin from curcumin bulk suspensions and nanocrystals, respectively. The smartFilms enabled an effective dermal and transdermal penetration of curcumin, whereas curcumin bulk- and nanosuspensions were less efficient when the curcumin content was similar to the curcumin content in the smartFilms. Interestingly, it was found that increasing numbers of curcumin particles within the suspensions increased the passive dermal penetration of curcumin. The effect is caused by an aqueous meniscus that is created between particle and skin if the dispersion medium evaporates. The connecting liquid meniscus causes a local swelling of the stratum corneum and maintains a high local concentration gradient between drug particles and skin. Thus, leading to a high local passive dermal penetration of curcumin. The findings suggest a new dermal penetration mechanism for active compounds from nano-particulate drug delivery systems, which can be the base for the development of topical drug products with improved penetration efficacy in the future.     

Thermal Stability of Amorphous Solid Dispersions

Amorphous solid dispersion drug delivery systems (ASD DDS) were proved to be efficient for the enhancement of solubility and bioavailability of poorly water-soluble drugs. One of the major keys for successful preparation of ASD is the selection of appropriate excipients, mostly polymers, which have a crucial role in improving drug solubility and its physical stability. Even though, excipients should be chemically inert, there is some evidence that polymers can affect the thermal stability of active pharmaceutical ingredients (API). The thermal stability of a drug is closely related to the shelf-life of pharmaceutical products and therefore it is a matter of high pharmaceutical relevance. An overview of thermal stability of amorphous solids is provided in this paper. Evaluation of thermal stability of amorphous solid dispersion is perceived from the physicochemical perspective, from a kinetic (motions) and thermodynamic (energy) point of view, focusing on activation energy and fragility, as well all other relevant parameters for ASD design, with a glance on computational kinetic analysis of solid-state decomposition.     

硼膜制备工艺、微观结构及其在硼化镁超导约瑟夫森结中的应用

MgB_2材料具备临界转变温度较高、相干长度大、临界电流和临界磁场高等优点,被认为有替代Nb基超导材料的潜力.研究了不同温度下以化学气相沉积法制备的硼(B)薄膜的微观结构.实验结果表明:较低温度沉积的B先驱薄膜为无定形B膜,可以与Mg蒸气反应生成MgB_2超导薄膜;当沉积温度高于550?C时,所得硼薄膜为晶型薄膜;以晶型硼薄膜为先驱膜在镁蒸气中退火,不能生成硼化镁超导薄膜.利用晶型B膜的这一特点,成功制备了以晶型硼薄膜为介质层的硼化镁超导约瑟夫森结.     

Model based prediction of the trap limited diffusion of hydrogen in post‐hydrogenated amorphous silicon

The diffusion of hydrogen within an hydrogenated amorphous silicon (a‐Si:H) layer is based on a trap limited process. Therefore, the diffusion becomes a self‐limiting process with a decreasing diffusion velocity for increasing hydrogen content. In consequence, there is a strong demand for accurate experimental determination of the hydrogen distribution. Nuclear resonant reaction analysis (NRRA) offers the possibility of a non‐destructive measurement of the hydrogen distribution in condensed matter like a‐Si:H thin films. However, the availability of a particle accelerator for NRR‐analysis is limited and the related costs are high. In comparison, Fourier transform infrared spectroscopy (FTIR) is also a common method to determine the total hydrogen content of an a‐Si:H layer. FTIR spectrometers are practical table‐top units but lack spatial resolution. In this study, an approach is discussed that greatly reduces the need for complex and expensive NRR‐analysis. A model based prediction of hydrogen depth profiles based on a single NRRA measurement and further FTIR measurements enables to investigate the trap limited hydrogen diffusion within a‐Si:H. The model is validated by hydrogen diffusion experiments during the post‐hydrogenation of hydrogen‐free sputtered a‐Si. The model based prediction of hydrogen depth profiles in a‐Si:H allows more precise design of experiments, prevents misinterpretations, avoids unnecessary NRRA measurements and thus saves time and expense. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

The effect of applied negative bias voltage on the structure of Ti-doped a-C:H films deposited by FCVA

Ti-doped hydrogenated diamond-like carbon (DLC) films were deposited on Si(1 0 0) substrates by a filtered cathodic vacuum arc (FCVA) method using Ar and CH₄ as the feedstock. The composition and microstructure of the films were investigated by Raman spectroscopy, X-ray photoelectron spectroscopy and IR spectroscopy. The internal stress was determined by the radius of curvature technique. The influence of the bias voltage on the microstructure of the as-deposited films was investigated. It was found that the graphite-like bonds was dominated in the Ti-doped DLC film deposited at 0 V bias voltage. When bias voltage was increased to −150 V, more diamond-like bond were produced and the sp³ content in film reached the maximum value, after which it decreased and more graphite-like bonds feature produced with further increase of the negative bias voltage. The compressive internal in the Ti-doped DLC films also exhibited a maximum value at −150 V bias voltage. IR results indicated that CH bonded intensity reduced, and H atoms bonded with C atoms were substituted for the Ti atoms as the negative bias voltage increasing. All the composition and microstructure change can be explained by considering the plasma conditions and the effect of negative bias voltage applied to the substrate.     

Growth and Atomic-Scale Characterization of Ultrathin Silica and Germania Films: The Crucial Role of the Metal Support

The present review reports on the preparation and atomic-scale characterization of the thinnest possible films of the glass-forming materials silica and germania. To this end state-of-the-art surface science techniques, in particular scanning probe microscopy, and density functional theory calculations have been employed. The investigated films range from monolayer to bilayer coverage where both, the crystalline and the amorphous films, contain characteristic XO₄ (X=Si,Ge) building blocks. A side-by-side comparison of silica and germania monolayer, zigzag phase and bilayer films supported on Mo(112), Ru(0001), Pt(111), and Au(111) leads to a more general comprehension of the network structure of glass former materials. This allows us to understand the crucial role of the metal support for the pathway from crystalline to amorphous ultrathin film growth.     

Silicon nitride/silicon oxide interlayers for solar cell passivating contacts based on PECVD amorphous silicon

This Letter demonstrates improved passivating contacts for silicon solar cells consisting of doped silicon films together with tunnelling dielectric layers. An improvement is demonstrated by replacing the commonly used silicon oxide interfacial layer with a silicon nitride/silicon oxide double interfacial layer. The paper describes the optimization of such contacts, including doping of a PECVD intrinsic a‐Si:H film by means of a thermal POCl₃ diffusion process and an exploration of the effect of the refractive index of the SiN_x. The n⁺ silicon passivating contact with SiN_x /SiO_x double layer achieves a better result than a single SiN_x or SiO_x layer, giving a recombination current parameter of ～7 fA/cm² and a contact resistivity of ～0.005 Ω cm², respectively. These self‐passivating electron‐selective contacts open the way to high efficiency silicon solar cells. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)