超细Sr2CeO4 粉体微乳液-高温法制备条件的正交试验及其发光性能研究

本文首先利用正交试验确定了微乳液-高温法合成蓝色发光Sr₂CeO₄超细粉体的最佳制备条件。接着研究了最佳条件下制备的Sr₂CeO₄超细粉体的性能。场发射扫描电镜(FE-SEM)显示，在850 ℃、900 ℃、1 000 ℃或者更高温度下退火4 h制备的粉体的形状分别呈球状、梭状和球状，平均粒径分别在100 nm左右和1 μm以内。X射线粉末衍射数据分析表明，该超细粉体属于正交晶系。室温下的光致发光光谱显示，该粉体的激发光谱有3个激发峰，主峰分别位于262 nm、281 nm和341 nm，而其发射光谱只呈现出1个发射峰，主峰位于约470 nm。与高温固相制备方法相比，微乳液-高温法可以在较低温度下制备出超细的粉体，而且它不但在262 nm处出现了一个新的激发峰，主激发峰和发射峰的位置也分别蓝移了大约30 nm和12 nm。     

Thermal behaviour and firing characteristics of Zr/KClO4 primer mixture containing CuO

The effect of CuO on the thermal behaviour of Zr/KClO₄ primer mixtures was studied by thermoanalytical techniques, and the Bruceton method and its related calculation. It was found that the CuO catalytically promoted the decomposition of Zr/KClO₄ primer mixtures and shifted the exothermic peak of DSC curves to lower temperatures. In addition, the Zr/KClO₄ primer mixture containing CuO had a significant effect on the firing characteristics of electro-explosive devices.     

Investigation of 2-[(<Emphasis Type="Italic">E</Emphasis>)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium as a new highly sensitive reagent for the spectrophotometric determination of nitrophenols

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of nitrophenols [picric acid (PA); dinitrophenols (DNP)] in wastewater samples. The method is based on the reaction of nitrophenols with 2-[(E)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3 H-indolium chloride reagent to form the colored ion associates, which are extracted by organic solvents. The molar absorptivity of the ion associates of PA with the investigated reagent ranges from 8.3×10⁴ to 11.3×10⁴ L mol^–1 cm^–1, depending on the extractant. Because only PA is extracted in an acidic medium with the investigated reagent, but both PA and DNP are extracted in an alkaline medium, it is possible to determine both substances in a mixture. Appropriate reaction conditions have been established. The absorbance of the colored extracts obeys Beers law in the range of 0.04–4.58 mg L^–1 PA, 1.0–18.4 mg L^–1 2,4-DNP and 1.2–14.7 mg L^–1 2,6-DNP, respectively. The limit of detections, calculated from a blank test (n=10; P=0.95), are 0.05 mg L^–1 PA, 0.9 mg L^–1 (2,4-DNP), and 1.1 mg L^–1 (2,6-DNP), respectively.     

Reaction of 1,5-diaryl-3-hydroxy-4-methylsulfonyl-3-pyrrolin-2-ones with urea,hydrazine, ethylenediamine,and <Emphasis Type="Italic">o</Emphasis>-phenylenediamine

With urea 1,5-diaryl-3-hydroxy-4-methylsulfonyl-3-pyrrolin-2-ones form the 3-amino derivatives of pyrrolones. In reactions with hydrazine hydrate and ethylenediamine the corresponding salts are formed. With ethylenediamine at 180–185°C the double salt of 3-hydroxy-4-methylsulfonyl-1,5-diphenyl-3-pyrrolin-2-one forms N,N′-di(4-methylsulfonyl-1,5-diphenyl-3-pyrrolin-2-on-3-yl)-ethylenediamine. The reaction with o-phenylenediamine gives 2,3-diaryl-4-methylsulfonylpyrrolo-[2,3-b]quinoxalines. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, 1631–1636, November, 2007.     

Conformations, Energy and Spectral Characteristics of 2,3-Trimethylene- and 2,3-Pentamethylene-3,4-dihydro-4-quinazolinones

Quantum-chemical calculations and IR spectroscopy were used to study the conformations as well as the energy and spectral characteristics of 2,3-trimethylene- and 2,3-pentamethylene-3,4-dihydro-4-quinazolinones. The shift of -electron density from the heterocyclic system to the carbonyl group and, thus, the proton affinity of the oxygen atom of this group increase with expansion of the bond angle at the nitrogen atom in going from a five-membered to seven-membered ring.     

XeF和KrF的热催化合成及KrF在含氟高能氧化剂NFBF合成中的应用

本文介绍了一种以氟气和惰性气体为原料合成 Kr F2 和 Xe F2 的热催化合成方法并对合成机理和条件作了简单的讨论 ,利用合成的 Kr F2 作为氟化剂合成了含氟高能氧化剂 NF4BF4,纯度约为 93%,其红外光谱和拉曼光谱基本与文献值吻合。元素分析结果表明产品 NF4BF4中含 B5.8%(mass) ,自由氟原子含量为 9.95%(mass) ,与理论值基本一致 ,此结果也间接证明了 Kr F2 质量的可靠性。粉末状的 Xe F2 经升华 -再结晶纯化后可得纯净晶体产品。     

两种荧光LB膜的制备和光谱性能

制取了４－二氰基亚甲基－２－甲基－６－对二甲胺基苯乙烯基－４Ｈ－吡喃（ＤＣＭ）和１，２－双（５－甲基苯并恶唑）基乙烯（ＤＴ）两种荧光分子的ＬＢ膜以及两者的混合膜，以吸收光谱和荧光光谱探讨了膜中分子的构型，微环境，发光性能等特征，发现在ＬＢ膜的缀密排布环境中ＤＣＭ顺式构型的含量较之在溶液中大为增加。     

电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

Eu3+掺杂的Sr2CeO4荧光材料的燃烧法合成及其性能研究

以尿素作燃料,Sr,Ce和Eu的硝酸盐作反应物,采用燃烧法得到了稀土Eu3 掺杂的Sr2CeO4前驱体粉末.将前驱体在一定温度下烧结3 h,合成了红色荧光材料.经过对材料进行X射线衍射(XRD)分析,确定了烧结温度在1050～1200℃时,能够得到纯度较高的产品.用扫描电镜(SEM)观察到样品烧结后的形貌为不规则的椭圆形,粒径范围在1～3 μm之间.样品的发射光谱和激发光谱表明,Eu3 在Sr2CeO4基质中有很高的猝灭浓度(10%,摩尔分数),随着Eu3 掺杂浓度的增加,可以使蓝白光调整到红白光,进而到红光.     

氧氟沙星荷移络合物的荧光特性和应用

研究了电子受体氯冉酸(CL)和2,3 二氰5,6 二氯1,4 对苯醌(DDQ)与电子给体氧氟沙星之间的荷移反应。实验发现,氧氟沙星与以上两种电子受体在氯仿中可生成稳定的n π络合物,其荧光强度较之氧氟沙星分别增强了22和54倍。据此建立了两种基于荷移反应简便可靠地测定氧氟沙星的荧光光谱新方法。CL法和DDQ法测定氧氟沙星的质量浓度分别为0 06～2.4μg/mL和0 16～2.0μg/mL时,荧光强度与质量浓度呈良好的线性关系。该方法已用于药物制剂中氧氟沙星的测定,其回收率分别为98.4%～100.9%和98.5%～100.4%。