Modification of a three-way catalyst washcoat by aging: A study along the longitudinal axis

This work reports the research carried out by studying aliquots extracted at different axial coordinates from Three Way Catalyst (TWC) monoliths aged under real traffic conditions. Our study focused on the catalytic properties and on several chemical and physical effects caused in the Front and Rear monolith washcoat surfaces by vehicle aging after 60,000 km. Regarding the catalytic properties, all the used aliquots showed poorer activity than their corresponding fresh counterparts. The strongest deactivation was detected for NO and hydrocarbon conversion. CO conversion was less affected and the Rear monolith was as deactivated as the Front one. The characterisation techniques (TXRF, N₂ adsorption-desorption isotherms, XRD and H₂-TPR) detected - (i) the deposition of P, Zn and Pb; (ii) the formation of CePO₄ on account of the Ce from the washcoat; (iii) thermal sintering; (iv) inhibition of the reducibility of Ce oxides - as the main effects brought about by vehicle aging conditions. The deactivation observed at the beginning of the Front monolith was the result of a combination of the former effects. When moving downstream to higher axial coordinates, Pb accumulation and the loss of specific area appeared to be the only probable sources of deactivation.     

胶束液相色谱／安培电化学检测尿样中的扑热息痛及4－氨基苯酚

用胶束液相色谱／安培检测器检测尿样中的扑热息痛及其主要水解产物４－氨基苯酚。采用１４．５μｍ的碳纤维电极作为工作电极，以高于临界胶束浓度的阴离子表面活性剂十二烷基磺酸钠（ＳＤＳ）作为液相色谱的流动相，尿样直接进样分析，扑热息痛和４－氨基苯酚的检测限分别为０．１３ｎｍｏｌ／Ｌ及０．７３ｎｍｏｌ／Ｌ（Ｓ／Ｎ＝２）。     

Diode-end-pumped Nd:YAGLaser with Cr4+:YAG as Passive Q-switch

A diode-end-pumped Nd:YAG laser is passively Q-switched by using Cr4+:YAG as saturable absorber. When CW pumped with a laser diode which the maximum power is 550 mW, the laser produces pulses of 24 ns duration at 1064 nm, with an energy of 26 μJ.     

K2NiF4型结构的A2－xSrxBO4(A＝La, Dy, B＝Mn, Fe, Co, Ni)希土复合氧化物的合成

以典型的轻希土镧和重希土镝及碱土金属锶作为Ａ位离子，以过渡金属锰、铁、钴、镍作为Ｂ位离子，合成了Ｋ２ＮｉＦ４型结构的Ａ２－ｘＳｒｘＢＯ４希土复合氧化物，采用粉末Ｘ射线衍射技术考察了反应条件等因素对生成Ｋ２ＮｉＦ４型四方（Ｔ）结构上析影响，实现结果表明，四方结构的形成不仅与几何因素有关，而且与各组分的物理化学性质有关。各个不同的组成，生成四方相的温度范围也有所不同。适当地提高反应温度以及延长灼烧时间     

纳米二氧化锆制备过程的DSC、TGA和XRD研究

用ＤＳＣ、ＴＧＡ和ＸＲＤ技术研究了在沉淀法制备纳米ＺｒＯ２的过程中，残留ＮＨ４Ｃｌ、ｐＨ值、滴加方式、以及结构稳定剂Ｙ２Ｏ３的添加量对结晶过程的影响。结果表明，残留ＮＨ４Ｃｌ使结晶化温度降低，使放热过程变为吸热过程。而ｐＨ值、滴加方式和结构稳定剂的添加对结晶过程无明显影响。     

喷雾干燥-高温固相法制备纳米LiFePO4与LiFePO4/C材料及性能研究

采用喷雾干燥-高温固相法制备纳米LiFePO₄与LiFePO₄/C正极材料，用X-射线衍射，扫描电镜等对合成材料进行了表征，并对以LiFePO₄为正极的电池进行了电化学性能测试。结果表明:材料合成最佳煅烧温度为600 ℃;合成过程中由于碳对LiFePO₄晶型的生长有一定的抑制作用，相对于纯LiFePO₄材料，LiFePO₄/C材料粒径更小;并且，在此最佳合成温度下合成的LiF     

6-甲基-4-羟基-喹啉酸盐羟基钒(V)(英文)

V anadium髨coordination com pound1is achievedby the hydrotherm al reaction of V2O5and ethyl6-m ethyl-4-hydroxy-3-quinolinecarboxylate(em hq)w ithwater as solvent.X-ray single crystal diffraction studyof com pound1(Fig.1)shows that com pound1crystal-lizes …     

液晶研究（Ⅰ）──4＇－酰基－4－羟基－1，1＇－联苯酯类液晶的合成与性质

以４＇－羟基联苯为原料合成了８种新型４＇－酰基－４－羟基联苯酯类化合物．除化合物５＿ｈ外，均为新的近晶相液晶化合物．它们具有较宽的相变温度范围和较高的热稳定性．用偏光显微镜和差热分析仪研究了它们的相行为，讨论了分子结构对液晶相行为的影响．