Stationary diffusion in the membrane systems with the ongoing reversible chemical reactions

The diffusion phenomena were analyzed using the phenomenological equations of the thermodynamics of irreversible processes. The diffusion coefficient was thought to be dependent on local concentrations and pressure, unlike it was done in the linear theories. The reversible chemical reactions were modeled as intermolecular interaction. The ideal and regular solutions and solutions, described by the Margules's and Sketchard–Hammer's equations, were investigated and analytical solutions were found.     

A new method for the evaluation of the reversible and irreversible fouling propensity of MBR mixed liquor

In this paper, a new fouling measurement method is presented as a pragmatic approach to determine a mixed liquor's fouling propensity. The MBR-VFM (VITO Fouling Measurement) uses a specific measurement protocol consisting of alternating filtration and physical cleaning steps, which enables the calculation of both the reversible and the irreversible fouling resistances. The MBR-VFM principle, set-up and measurement protocol are described as well as the evaluation of the fouling measurement method. Finally, the MBR-VFM was validated by comparing the fouling propensity measured on-line by the MBR-VFM in a lab-scale MBR with the fouling of the MBR membranes themselves. Our experiments indicated that the MBR-VFM can accurately measure fouling and that it can even be detected earlier than can be seen from the on-line filtration data of the lab-scale system itself. Furthermore, the differences measured in reversible and irreversible fouling seemed to be related to the observed impact of physical and chemical cleaning respectively. Therefore, the application of the MBR-VFM as an on-line sensor in an advanced control system, enabling the deployment of the measured fouling data for the control of membrane cleaning, seems feasible and will be tested in the near future.     

A note on finite termination of iterative algorithms in mathematical programming

Two well-known results on the unified treatment of finite termination of a class of algorithms for solving convex programming problems and for solving variational inequality problems are reconsidered. In particular, some of the underlying assumptions employed in the existing literature are shown to be redundant.     

Reversible click chemistry at the service of macromolecular materials. Part 1: Kinetics of the Diels-Alder reaction applied to furan-maleimide model compounds and linear polymerizations

The model Diels-Alder reaction of furfuryl acetate with N-methylmaleimide and the linear polymerization of the corresponding difunctional monomers were followed by both UV and ¹H NMR spectroscopy. The results obtained from this study provided clear-cut indications about the most appropriate conditions to be applied in the preparation of novel macromolecular materials based in part on renewable resources and possessing thermoreversible, mendable and recycling features, among other properties.     

Single-Molecule Force Spectroscopy of DNA-Based Reversible Polymer Bridges: Surface Robustness and Homogeneity

Single-molecule force spectroscopy, as implemented in an atomic force microscope, provides a rarely used method by which to monitor dynamic processes that occur near surfaces. Here, a methodology is presented and characterized that facilitates the study of polymer bridging across nanometer-sized gaps. The model system employed is that of DNA-based reversible polymers, and an automated procedure is introduced that allows the AFM tip–surface contact point to be automatically determined, and the distance d between opposing surfaces to be actively controlled. Using this methodology, the importance of several experimental parameters was systematically studied, e.g. the frequency of repeated tip/surface contacts, the area of the substrate surface sampled by the AFM, and the use of multiple AFM tips and substrates. Experiments revealed the surfaces to be robust throughout pulling experiments, so that multiple touches and pulls could be carried out on a single spot with no measurable affect on the results. Differences in observed bridging probabilities were observed, both on different spots on the same surface and, more dramatically, from one day to another. Data normalization via a reference measurement allows data from multiple days to be directly compared.     

线性互补问题的一类新的带参数价值函数的阻尼牛顿法

本文给出了线性互补问题LCP(q ,M)的一类新的带参数光滑价值函数 ,基此价值函数提出了一种阻尼牛顿类算法 ,并证明了当M为P 矩阵时 ,该算法全局收敛且有限步终止 .通过数值实验说明了该算法高效可靠 .与互补问题的磨光方程组中所采用的带参数价值函数不同 ,这里的参数最终并不趋向于零 ,而是趋向于被称作解的乘子向量 (与凸非线性极小极大问题的Lagrange乘子完全一致 ) ,这一思想是本文作者首次提出来的 ,同时本文中所采用的阻尼牛顿类方法也有其独到之处 ,在互补问题的研究中有进一步发展的潜力     

A comprehensive Monte Carlo simulation of styrene atom transfer radical polymerization

<正>An optimized and high-performance Monte Carlo simulation is developed to take thorough account of four different cases of termination in styrene ATRP.According to the simulation results,the bimolecular termination rate constant sharply drops throughout the polymerization when either chain-length dependency of termination rate constant,gel effect,or both together is applied to the simulation.In addition,as expected,the initiator is quickly decomposed at the early stages of the polymerization.The concentration of the catalyst in lower oxidation state decreases at first and then plateaus at higher conversion;furthermore,the steady concentration of M_t~nY/L in the polymerization is the highest when the chain-length-dependent diffusion-controlled termination rate constant is employed in the simulation.The rates of deactivation and chain end degradation reactions are also smaller in this case.Therefore,the fraction of dormant chains is higher throughout the reaction and consequently the portion of dead polymers decreases.Besides,molecular weight increases linearly with conversion;however,when neither gel effect nor chain-length dependency of termination rate constant is considered,the molecular weight deviates from linearity at the end of the reaction.The peak of chain length distribution shifts toward higher molecular weight too during the reaction.Finally,the molecular weight distribution broadens at higher conversion;however, the chain length distribution of polymers produced under conditions of applying chain-length-dependent diffusion-controlled termination rate constant is narrower.     

Research on high-voltage 4H-SiC P-i-N diode with planar edge junction termination techniques

The planar edge termination techniques of junction termination extension (JTE) and offset field plates and field-limiting rings for the 4H-SiC P-i-N diode were investigated and optimized by using a two-dimensional device simulator ISE-TCAD10.0. By experimental verification, a good consistency between simulation and experiment can be observed. The results show that the reverse breakdown voltage for the 4H-SiC P-i-N diode with optimized JTE edge termination can accomplish near ideal breakdown voltage and much lower leakage current. The breakdown voltage can be near 1650 V, which achieves more than 90 percent of ideal parallel plane junction breakdown voltage and the leakage current density can be near 3 × 10-5 A/cm2.     

On the reversibility of anode supported proton conducting solid oxide cells

Reversible proton conducting solid oxide cells (SOCs) off a highly efficient route to matching supply from intermittent, renewable resources, with power demand by consumers. The cells would store excess electrical energy as chemical fuel during times of peak production, and operate in reverse during times of peak demand. In this study we examine the operation of anode supported proton conducting SOCs in electrolysis mode. The required overpotential for a given current density decreases with increasing humidity at the anode and increasing temperature. All of the V-I curves show distinct curvature. The electrode polarization resistance increases and electrolyte ohmic resistance decreases with increasing current density. This is accompanied by a deviation below the theoretical rate of hydrogen production. We interpret these changes as resulting from deviation away from pure proton conduction in the cell with increasing polarization.