Enzymes Hosted in Reverse Micelles in Hydrocarbon Solution

Reverse micelles are spheroidal aggregates formed by certain surfactants in apolar media. In contrast to normal micelles in water, the polar head groups of the surfactant molecules are directed towards the interior of the aggregate and form a polar core which can solubilize water (the “water pool”); the lipophilic chains are exposed to the solvent. The water of the water pool exhibits properties that (depending on the mole ratio of water to surfactant) differ from those of bulk water. Surprisingly, these reverse micelles are able to solubilize in hydrocarbon solvents hydrophilic molecules, e.g., enzymes and even plasmids, that are much larger than the original water-pool diameter. These biopolymer-containing reverse micelles can be viewed as novel microreactors, whose physical properties can be controlled through the water content. Remarkable is the ability of enzyme-containing micelles to react with water-insoluble, hydrocarbon-soluble substrates, as in the example of lipoxygenase with linoleic acid.     

Percolative phenomena in lecithin reverse micelles: the role of water

 The role played by the solvation water molecules on the macroscopically observed sol–gel transition in lecithin/cyclohexane/water reverse micelles is investigated by quasielastic neutron scattering, dielectric relaxation and conductivity measurements. The experimental results are juxtaposed to those from spherical Aerosol OT reverse micelles. It is shown how the results from lecithin-based system can be interpreted only assuming that, in contrast to Aerosol OT systems, the water molecules are entrapped at the interfaces without coalescing into an inner water pool. It is suggested that, in the case of lecithin, the solvation water can induce a change in the surface curvature, in such a way promoting the formation of branch points. Such a hypothesis is supported by the temperature dependence of the conductivity which agrees with the hypothesis of an intermicellar bond percolation. The investigation of the structures imposed by an external electric field is also studied. The observed electrorheological behaviour seems to confirm the existence of a percolated transient network in the gel phase. Received: 21 March 2001 Accepted: 24 August 2001     

Effect of solution chemistry on the surface charge of polymeric reverse osmosis and nanofiltration membranes

A streaming potential analyzer has been used to investigate the effect of solution chemistry on the surface charge of four commercial reverse osmosis and nanofiltration membranes. Zeta potentials of these membranes were analyzed for aqueous solutions of various chemical compositions over a pH range of 2 to 9. In the presence of an indifferent electrolyte (NaCl), the isoelectric points of these membranes range from 3.0 to 5.2. The curves of zeta potential versus solution pH for all membranes display a shape characteristic of amphoteric surfaces with acidic and basic functional groups. Results with salts containing divalent ions (CaCl₂, Na₂SO₄, and MgSO₄) indicate that divalent cations more readily adsorb to the membrane surface than divalent anions, especially in the higher pH range. Three sources of humic acid, Suwannee River humic acid, peat humic acid, and Aldrich humic acid, were used to investigate the effect of dissolved natural organic matter on membrane surface charge. Other solution chemistries involved in this investigation include an anionic surfactant (sodium dodecyl sulfate) and a cationic surfactant (dodecyltrimethylammonium bromide). Results show that humic substances and surfactants readily adsorb to the membrane surface and markedly influence the membrane surface charge.     

Complexation of Al(III) by 8-Hydroxyquinoline and Drastic Fluorescence Enhancement in Reverse Micelles

Complexation of Al^IIIby 8-hydroxyquinoline and fluorescence behavior of the quinolinate(s) were studied in reverse micellar systems at low water content, and compared to aqueous media. Two surfactants were used: one was cationic (CTAC: cetyltrimethylammonium chloride) and the other was anionic (AOT: sodium bis(2-ethylhexyl)sulfosuccinate). The results obtained in the CTAC/dichloromethane system (W= [H₂O]/[surfactant] = 0.9) showed that complexation occurred very likely in the oil phase and no micellar effect was observed. On the contrary, in the presence of AOT, specific micellar effects were observed due to the presence of the anionic polar heads: stabilization of the positively charged 1:1 and 1:2 chelates, at the expense of the neutral water-insoluble 1:3 chelate which is formed in aqueous solutions under similar conditions;drastic fluorescence enhancement factorsof 120 and 100 in AOT/heptane (W= 1.5) and AOT/dichloromethane (W= 1.6), respectively. Such factors have never been reported so far in either hydroorganic or direct micellar systems. In return, the length of time for the production of the complex(es) is increased because of the microheterogeneity of the medium and the small sizes of the water pools.     

Calorimetric study on the solubilization of some primary alcohols by reversed AOT micelles

A calorimetric method to evaluate, at the same time, the distribution constant and the standard enthalpy of transfer of a solute partitioned between organic phase and reversed micelles is proposed. The method was applied to the partition of methanol, 1-propanol and 1-pentanol between n-heptane and AOT reversed micelles containing water at 25°C. The results show that the distribution constant decreases as the alcohol alkyl chain length increases and that the solubilization site can change as the water content of reversed AOT micelles increases. In particular, at sufficiently high water content, methanol seems to be preferably solubilized in the aqueous pseudophase whereas 1-pentanol prefers always the palisade layer as site of solubilization.In part from Doctor in Biology thesis of F. Pinio, University of Palermo, Italy.     

Mixed micelles of cetyltrimethylammonium bromide and poly(ethylene glycol)-600 monolaurate as catalysts of polyethylenimine phosphorylation in chloroform

Micelle formation in a cetyltrimethylammonium bromide-poly(ethylene glycol)-600 monolaurate-chloroform system in the absence and presence of hydroxybenzylated polyethylenimines (PEI) was studied by dielcometric titration, NMR self-diffusion, light scattering, and kinetic methods. A catalytic effect of mixed micelles on the reaction of 4-nitrophenylbis(chloromethyl)phosphinate with PEI was shown. The catalytic effect depends on the degree of substitution of PEI and composition of a surfactant mixture. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1359–1365, August, 2006.     

Mixed micelles of tetradecyltrimethylammonium bromide and chlorhexidine digluconate in aqueous solutions of isopropyl alcohol

The influence of isopropyl alcohol (IPA) on the size and composition of the mixed micelles in mixtures of tetradecyltrimethylammonium bromide (TTAB) and chlorhexidine digluconate (CG) has been determined as a function of the composition of the systems. The addition of 0.5 M and 1.0 M IPA had little significant effect on the composition of the mixed micelles as determined both by analysis of critical micelle concentration (CMC) data using a theoretical treatment based on excess thermodynamic quantities and by an empirical treatment of conductivity data. Static and quasielastic light scattering measurements showed a progressive decrease of the aggregation number and hydrodynamic radius of TTAB micelles on addition of IPA, but minimal changes in the properties of the small CG aggregates. The results show that the micellar weight in the TTAB/CG/IPA solutions is determined by the ratio of the surfactants in the system and for each TTAB/CG ratio decreases on addition of IPA.     

Electrophoretic mobility of the polymer-like micelles of tetradecyldimethylamine oxide hemihydrochloride

Effects of the surfactant concentration C_d and the NaCl concentration C_s on the electrophoretic mobilities U of the well-characterized polymer-like micelles have been investigated by the electrophoretic light scattering, using tetradecyldimethylamine oxide hemihydrochloride (C14DMAO·1/2HCl). At the high ionic strength of 0.1 mol kg⁻¹ NaCl, the electrophoretic mobilities were independent of C_d (5 mM < C_d < 100 mM), despite the concentration-dependent micelle growth of the polymer-like micelles. This suggests that the electrophoretic mobility of the polymer-like micelle at high ionic strengths is independent of the contour length (i.e., the molecular weight), as found on linear polyelectrolytes. Somewhat surprisingly, the entanglements of the polymer-like micelles gave small effect on the electrophoretic mobilities in the examined range of the surfactant concentration above an overlap concentration. The mobilities of the polymer-like micelle decreased with √C_s in a single exponential manner in the range of C_s from 0.02 to 0.3 mol kg⁻¹. It is suggested that the cylinder model can be applied to the electrophoretic mobilities of the polymer-like micelles at high ionic strengths (i.e. a free-draining behavior), since the persistence length of the polymer-like micelle (20 nm) is much larger than the Debye length at high ionic strength.     

Sodium hexadecanoate micellar aggregation number

The diffusion coefficient of sodium hexadecanoate micelles was studied by polarography at 63°C, and the size and aggregation number of the micelles was computed. At concentrations above 0.01 mol·L^–1 rodlike micelles exist, which become flexible at 0.040 mol·L^–1 and entangle at 0.043 mol·L^–1     

含胆汁酸和胆固醇的双亲性聚合物的研究进展

胆固醇和胆汁酸是广泛存在于自然界中的天然物质 ,生物相容性好 ,被广泛地用于高分子的疏水性改性 ,得到的双亲性聚合物 ,在水相中可以自组装或自聚集成纳米粒子。本文综述了含胆固醇或胆汁酸的双亲性聚合物的最新研究进展以及它们在药物载体系统中的应用。