AIBN/SmCl3/乳酸体系催化甲基丙烯酸甲酯的反向原子转移自由基聚合

利用稀土金属化合物三氯化钐(SmCl3)和二氯化钐(SmCl2)之间的单电子转移反应,以AIBN/SmCl3/乳酸作为反向原子转移自由基聚合(ReverseATRP)的催化体系,成功地实现了甲基丙烯酸甲酯(MMA)的反向ATRP,并考察了温度、溶剂和组分比对聚合反应的影响.MMA在该体系中的聚合反应是一级反应,所得PMMA的分子量与单体转化率成正比,聚合物的分子量分布较窄(Mw/Mn<1.5),具有活性聚合的特征.     

Reverse zymography using fluorogenic substrates for protease inhibitor detection

A novel, sensitive method for detecting protease inhibitors by using fluorescent protease substrates in gels is described. The protease inhibitors were separated on sodium dodecyl sulfate (SDS)-polyacrylamide gels containing a copolymerized peptide substrate, namely 4-methyl-coumaryl-7-amide (MCA). As the incorporated substrates in the gel, Boc-Phe Ser-Arg-MCA was used for trypsin, Suc-Ala-Ala-Pro-Phe-MCA for alpha-chymotrypsin, and Z-Phe-Arg-MCA for papain. After electrophoresis, washing and incubating the gel with the target protease solutions allowed the substrate to be cleaved by the protease, and the release of the fluorescent 7 amino-4 methyl-coumarin (AMC), which was detected under a UV transilluminator. The uncleaved peptide-MCA substrate remained where the inhibitors were present, and was visualized as dark blue bands on the light-green fluorescent background gel. This new method offers several advantages over other previous methods including: (i) greatly increased sensitivity can be achieved in a shorter period of time, which may be useful for discovering new protease inhibitors in small amounts of crude material; (ii) the procedure is quite simple and quick since the incubation period is very short and no time is needed for staining and destaining steps; (iii) since these probes using substrate specificity/target proteases, they are excellent tools for detection and discrimination of unknown protease inhibitors for various target proteases.     

A proton NMR study on aggregation of cationic surfactants in water: effects of the structure of the headgroup

 ¹H NMR chemical shifts of solutions of the following cationic surfactants in D₂O were determined as a function of their concentrations: cetyltrimethylammonium chloride, CTACl, a 1 : 1 molar mixture of CTACl and toluene, cetylpyridinium chloride, CPyCl, cetyldimethylphenylam-monium chloride, CDPhACl, cetyldimethylbenzylammonium chloride, CDBzACl, cetyldimethyl-2-phenylethylammonium chloride, CDPhEtACl, and cetyldimethyl-3-phenylpropylammonium chloride, CDPhPrACl. Plots of observed chemical shifts versus [surfactant] are sigmoidal, and were fitted to a model based on the mass-action law. Satisfactory fitting was obtained for the discrete protons of all surfactants. From these fits, we calculated the equilibrium constant for micelle formation, K, the critical micelle concentration, CMC and the chemical shifts of the monomer, δ_mon and the micelle δ_mic. ¹H NMR-based CMC values are in excellent agreement with those which we determined by surface tension measurements of surfactant solutions in H₂O, allowing for the difference in structure between D₂O and H₂O. Values of K increase as a function of increasing the size of the hydrophilic group, but the free energy of transfer per CH₂ group of the phenylalkyl moiety from bulk water to the micellar interface is approximately constant, 1.9±0.1 kJ mol^-1. Values of (δ_mic–δ_mon) for the surfactant groups at the interface, e.g., CH₃–(CH₂)₁₅–N+(CH₃)₂ and within the micellar core, e.g., CH₃–(CH₂)₁₅–N⁺ were used to probe the (average) conformation of the phenyl group in the interfacial region. The picture that emerges is that the aromatic ring is perpendicular to the interface in CDPhACl and is more or less parallel to it in CDBzACl, CDPhEtACl, and CDPhPrACl. Received: 23 February 1996 Accepted: 29 August 1996     

Temperature dependence of second critical micelle concentration of dodecyldimethylbenzylammonium bromide in aqueous solution

The specific conductivity of dodecyldimethylbenzylammonium bromide (C12BBr) in aqueous solutions, in the temperature range of 15 to 40 °C, has been measured as a function of molality. The two breaks which were found on the conductivity against molality plots were attributed to the critical micelle concentration, cmc, and second critical micelle concentration, 2^nd cmc, respectively. The ratio of the slopes, S, of the three linear fragments on the plots, S2/S1 and S3/S1, was attributed to the degree of ionization of the micelles at cmc and 2^nd cmc respectively. It was shown that the values of the 2^nd cmc estimated above 27 °C are only apparent due to thermal disintegration of the micelles. In the temperature range of 15 to 27 °C, the values of the 2^nd cmc increase gradually and the plot of the 2^nd cmc against temperature is concave. The ratio of 2^nd cmc/cmc for C12BBr at 25 °C amounts to 15 and appears to be high compared to the literature values for other surfactants. For comparative purposes the cmc and 2^nd cmc values were also estimated conductometrically for decyldimethylbenzylammonium bromide (C10BBr) at 25 °C. The 2^nd cmc value for this surfactant is higher compared to the value for the C12 homologue by a factor of 2.6.The standard Gibbs free energies of micellization at cmc and at the 2^nd cmc were estimated from the experimental data for both surfactants at 25 °C.     

无机盐对正负表面活性剂混合体系性质的影响

用滴体积法测定了四种离子强度下(μ=0.02, 0.05, 0.1, 0.2 mol·kg~(-1), 支持电解质为NaBr)C_(12)H_(25)SO_4Na/C_6H_(13)(NC_5H_5)Br混合体系在五种比例(10:1, 3:1, 1:1, 1:3, 1:10)时的临界胶团活度cma(25 ℃). 提出了无机盐对正负表面活性剂混合体系临界胶团活度的影响程度的计算式.     

N，N-二丁基癸酰胺萃取硝酸有机相结构研究

利用界面张力、电导、FT-IR等研究了不同硝酸浓度下萃取有机相的微结构。利用Gaussian曲线拟合处理N，N-二丁基癸酰胺(DBDEA)的羰基吸收峰，结果表明体系中存在多种以氢键结合的物种如DBDEA·HNO₃、(DBDEA)₂·HNO₃等。在较高酸度下有机相中萃取剂分子自组装成小的聚集体-反相胶团，极性核由水、硝酸和萃取剂高电荷密度的极性部分构成。     

反胶束法合成氧化锌微晶及其荧光特性

0引言材料的结构(微结构)、尺寸和形貌等因素对其特性及其实际应用具有重要的影响。对无机材料特别是氧化物半导体进行结构控制的研究近年来引起了人们极大的关注。氧化锌作为一种宽带隙(3.2eV)半导体材料,可广泛应用于压电材料、气体传感器、橡胶添加剂和光学器件等领域,而且还因其在室温下可产生激射现象使其成为纳米光学材料研究领域中的一大热点[1￣6]。目前,除了传统的固相-气相(V S)反应外,用于氧化锌微晶的制备方法主要有共沉淀法[7]、多羟基化合物水解法[8]、有机金属气相沉积法[9￣12]和水热法[13]等。通过选择不同的制备方法和…     

反胶束模板制备聚甲基丙烯酸甲酯/无机纳米粒子/石墨纳米复合材料及其表征

以甲基丙烯酸甲酯(MMA)和三氯甲烷(CHCl₃)为油相制备反胶束微乳液, 依靠表面活性剂十六烷基三甲基溴化铵(CTAB)自组装形成的“微反应器”作为模板成功地制备了PMMA/Eu(OH)₃/EG和PMMA/Ni(OH)₂/EG纳米复合材料. 并用红外光谱(IR)、扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)和差热-热重(TG-DTA)对该复合材料进行了表征和分析. 研究结果表明, 反胶束法可以有效地应用于有机-无机纳米复合材料的制备.     

REVERSE ATOM TRANSFER RADICAL POLYMERIZATION OF STYRENE WITH COPPER-BASED CATALYST

 "Living"/controlled radical polymerization of styrene was carried out with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS)/CuCl₂/bipyridine (bipy) initiation system at 120℃. The molecular weights of resultant PSt increased with the monomer conversion and the polydispersities were in the range of 1.37 ～ 1.52. A linear ln([M]o/[M])versus time plot was also obtained indicating the constant concentration of growing radicals during the polymerization with this initiation system. End group analysis by ¹H-NMR spectroscopic studies showed that the end groups of the polymer obtained is cω-functionalized by a chlorine group from the catalyst and a-functionalized by a (carbethoxy-cyano-phenyl)methyl group from the fragments of the initiator. Having C1 atom at the chain end, the PSt obtained can be used as a macroinitiator to promote a chain-extension reaction with fresh St and block copolymerization reaction with a second monomer, such as methyl methacrylate, in the presence of CuC1/bipy catalyst via a conventional ATRP process.