Lot-sizing with fixed charges on stocks: the convex hull

In this paper, we examine a variant of the uncapacitated lot-sizing model of Wagner–Whitin that includes fixed charges on the stocks. Such a model is natural in a production environment where stocking is a complex operation, and appears as a subproblem in more general network design problems.

Linear-programming formulations, a dynamic program, the convex hull of integer solutions and a separation algorithm are presented. All these turn out to be very natural extensions of the corresponding results of Barany et al. (Math. Programming Stud. 22 (1984) 32) for the uncapacitated lot-sizing problem. The convex hull proof is based on showing that an extended facility location formulation is tight and by projecting it onto the original space of variables.     

Effects of vitrification suppression on structure morphology, conductivity and dielectric properties of vanadium phosphate glasses

Vitrification suppression in the (V₂O₅)_1−x (P₂O₅)_x glasses where x=0.10, 0.15, 0.20, and 0.25 was controlled by changing the rate of quenching glasses. The structure variations occurring in the glasses were detected by differential thermal analysis and optical microscope. The results implied the separation and growth of V₂O₅ orthorhombic microcrystal in the samples with x=0.10 and 0.15 whereas other samples did not illustrate remarkable changes in their microstructure. However, in temperature range between 300 and 473 K a semiconducting behavior for all samples appears during the study of electrical conductivity-temperature dependence. A decrease in conductivity values accompanied with some variations in activation energies by reducing quenching rate was observed. The conductivity results suggested that the conduction occurs by the phonon assisted hopping of a small polaron between V⁴⁺ and V⁵⁺ states at relatively higher temperature range above θ_D/2. Whereas at relatively low temperatures the conduction may occur by electron jumping between filled and empty states at Fermi level in the disordered matrix besides polaronic conduction. Reasonable values for the density of localized states, carrier concentration and carrier mobility were estimated and discussed. Also, dielectric constant and dielectric loss were studied as a function of frequency at different temperatures confirming the structure variations in the glass system.     

Improved holographic particle sizing by using absolute values of the wavelet transform

A new method for sizing particle from in-line particle holograms by using absolute values of the wavelet transform is proposed in order to improve accuracy in measurements. The proposed method provides direct calculation of the particle size by using spatial frequency information of a chirp signal at minima position of an envelope function. Simulation and experimental results are presented.     

具有种内互惠作用的Lotka-Volterra互惠共存模型

对具有种内互惠作用的Lotka-Volterra互惠共存模型进行了完整的全局分析，得到了一些新的结果。     

2-碘-N-甲基苯磺酰胺的合成新方法和分子结构

选用新方法合成了2-碘—N-甲基苯磺酰胺，通过^1H NMR,^13C NMR,^13C DEPT NMR(Distortionless Enhancement by Polarization Transfer NMR)和MS确证的其结构。     

Evaluation of closed-vessel microwave digestion method for the determination of trace impurities in polymer-based photoresist by inductively coupled plasma mass spectrometry

A closed microwave digestion method followed by inductively coupled plasma spectrometric (ICP-MS) analysis was evaluated for the determination of trace impurities in photoresist. To optimize the digestion procedure, several digestion parameters such as acid, heating temperature and heating time were evaluated. Besides, the digestion efficiency of used photoresist material and the recovery of analyte elements obtained by the use of gravimetric method and ICP-MS measurement, individually, were also compared to clarify the completeness of digestion. According to our experiments, the gravimetric method was found to be not so relevant to the completeness of digestion, because the remaining sample matrix could cause suppression effect in the subsequent ICP-MS measurement. In view of minimizing blank value and working time, a simple single-step heating program was proposed to mineralize 0.25 ml of photoresist material with 5 ml of nitric acid at 180 °C for 10 min. Based on the comparative study of the analytical results obtained by instrumental neutron activation analysis (INAA) and proposed method, the reliability of proposed method for the determination of trace metallic impurities in photoresist material has been confirmed.     

On the Bavrin Integro-Differential Operators and Their Applications to Solution of Functional Equations

We construct a multiplicative group structure in the class of integro-differential operators specific for a polydisk which was introduced by I. I. Bavrin. We indicate two applications of these operators to solution of functional equations.     

Computational analysis of native and modified oligofructosides

This paper presents a quantum chemical calculation of native (2–7 fructoside residues) and chemically modified (2–4 fructoside residues) levan molecule models. A levan modification was carried out by oxidation and the following reduction or hyrdazonation of the fructoside rings. The conformational particularity and reaction ability was studied for the native and for the modified levan molecules.     

Study of a vibrating plate: comparison between experimental (ESPI) and analytical results

Real-time electronic speckle pattern interferometry (ESPI) was used for tuning and visualization of natural frequencies of a trapezoidal plate. The plate was excited to resonant vibration by a sinusoidal acoustical source, which provided a continuous range of audio frequencies. Fringe patterns produced during the time-average recording of the vibrating plate—corresponding to several resonant frequencies—were registered. From these interferograms, calculations of vibrational amplitudes by means of zero-order Bessel functions were performed in some particular cases. The system was also studied analytically. The analytical approach developed is based on the Rayleigh–Ritz method and on the use of non-orthogonal right triangular co-ordinates. The deflection of the plate is approximated by a set of beam characteristic orthogonal polynomials generated by using the Gram–Schmidt procedure. A high degree of correlation between computational analysis and experimental results was observed.     

Cold compaction of ceramic powder: Computational analysis of the effect of pressing method and die shape

This paper deals with a computational analysis of the influence of the pressing method and part geometry on the final density distribution in the cold compaction process of ceramic alumina powders. The analysis is based on the explicit finite-element model proposed and validated in a previous study. The mechanical behavior of the processing material is described using a multisurface elastoplastic model, the modified Drucker-Prager/Cap model Published in Prikladnaya Mekhanika, Vol. 43, No. 10, pp. 129–134, October 2007.