硫化铜空心球的合成和生长机理及其在抗肿瘤中的应用

以Cu(NO_3)_2·3H_2O,H_2C_2O_4和Na_2S·9H_2O为原料,利用简易水热方法合成了笼状硫化铜空心球。所得产物用X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)进行了表征,并研究了其可能的形成机理。所得CuS空心球具有较高的光热转换性能,在近红外光辐照下,对肿瘤细胞具有明显的光热毒性。     

Undesired Bulk Oxidation of LiMn2O4 Increases Overpotential of Electrocatalytic Water Oxidation in Lithium Hydroxide Electrolytes

Chemical and structural changes preceding electrocatalysis obfuscate the nature of the active state of electrocatalysts for the oxygen evolution reaction (OER), which calls for model systems to gain systematic insight. We investigated the effect of bulk oxidation on the overpotential of ink-casted LiMn₂O₄ electrodes by a rotating ring-disk electrode (RRDE) setup and X-ray absorption spectroscopy (XAS) at the K shell core level of manganese ions (Mn−K edge). The cyclic voltammogram of the RRDE disk shows pronounced redox peaks in lithium hydroxide electrolytes with pH between 12 and 13.5, which we assign to bulk manganese redox based on XAS. The onset of the OER is pH-dependent on the scale of the reversible hydrogen electrode (RHE) with a Nernst slope of −40(4) mV/pH at −5 μA monitored at the RRDE ring. To connect this trend to catalyst changes, we develop a simple model for delithiation of LiMn₂O₄ in LiOH electrolytes, which gives the same Nernst slope of delithiation as our experimental data, i. e., 116(25) mV/pH. From this data, we construct an E^RHE-pH diagram that illustrates robustness of LiMn₂O₄ against oxidation above pH 13.5 as also verified by XAS. We conclude that manganese oxidation is the origin of the increase of the OER overpotential at pH lower than 14 and also of the pH dependence on the RHE scale. Our work highlights that vulnerability to transition metal redox may lead to increased overpotentials, which is important for the design of stable electrocatalysts.     

Extracting the mechanisms and kinetic models of complex reactions from atomistic simulation data

Determining reaction mechanisms and kinetic models, which can be used for chemical reaction engineering and design, from atomistic simulation is highly challenging. In this study, we develop a novel methodology to solve this problem. Our approach has three components: (1) a procedure for precisely identifying chemical species and elementary reactions and statistically calculating the reaction rate constants; (2) a reduction method to simplify the complex reaction network into a skeletal network which can be used directly for kinetic modeling; and (3) a deterministic method for validating the derived full and skeletal kinetic models. The methodology is demonstrated by analyzing simulation data of hydrogen combustion. The full reaction network comprises 69 species and 256 reactions, which is reduced into a skeletal network of 9 species and 30 reactions. The kinetic models of both the full and skeletal networks represent the simulation data well. In addition, the essential elementary reactions and their rate constants agree favorably with those obtained experimentally. © 2019 Wiley Periodicals, Inc.     

Kinetics of carbon steel dissolution in ammonium chloride solution containing sodium thiosulfate

The dissolution behavior of carbon steel in ammonium chloride (NH₄Cl) solution containing sodium thiosulfate (Na₂S₂O₃) of various concentrations (0.01 and 0.1 M) was investigated using electrochemical impedance spectroscopy (EIS) and other nonelectrochemical techniques. The weight loss and polarization measurements indicate a significant increase in the NH₄Cl corrosion rate of carbon steel on addition of Na₂S₂O_3. The EIS measurements exhibited two capacitive loops at multiple direct current (dc) potentials for both the concentrations. Electrical equivalent circuit (EEC) and reaction mechanism analysis (RMA) were employed to analyze the impedance data. A four-step mechanism with two intermediate adsorbate species of same charge was proposed to explain the dissolution behavior of carbon steel in the given system. The surface coverage values enumerated that the surface was entirely covered with adsorbed species unlike in the pure NH₄Cl system. Charge transfer resistance and polarization resistance values estimated from RMA parameters indicate the increase in a dissolution rate with dc potential. The surface morphology was inspected via field emission scanning electron microscopy, and the corrosion products including surface state of carbon steel electrode were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.     

Finding of remarkable synergistic effect on the aroxyl-radical-scavenging rates under the coexistence of α-tocopherol and catechins

Measurements of aroxyl radical (ArO^•)-scavenging rate constants () of antioxidants (AOHs) (α-tocopherol (α-TocH) and three catechins (CatHs) (ie, epicatechin (EC), epigallocatechin (EGC), and epigallocatechin gallate (EGCG)) were performed in ethanol solution, using stopped-flow spectrophotometry. values were measured not only for each AOH, but also for the mixtures of two AOHs (α-TocH and CatH). A notable synergistic effect that the value of α-TocH increases 1.29, 1.84, and 1.65 times under the coexistence of constant concentrations of EC, EGC, and EGCG, respectively, was observed for the solutions including α-TocH and CatH. Similarly, values of CatHs (EC, EGC, and EGCG) increased 1.72, 2.25, and 2.34 times under the coexistence of constant concentrations of α-TocH, respectively. UV-Vis absorption of α-tocopheroxyl radical (α-Toc^•) (λ_max = 428 nm), which had been produced by reaction of α-TocH with ArO^•, decreased remarkably under the coexistence of α-TocH and CatHs due to the fast α-TocH-regeneration reaction by CatHs. The result suggests that the prooxidant reaction due to α-Toc^• is suppressed by the coexistence of CatHs. By analyzing the formation and decay curves of α-Toc^•, it has been ascertained that one molecule of EGCG having three OH groups at B-ring may rapidly regenerate three molecules of α-Toc^• to α-TocH.     

Automated chemical resonance generation and structure filtration for kinetic modeling

This work discusses efficient and automated methods for constructing a set of representative resonance structures for arbitrary chemical species, including radicals and biradicals, consisting of the elements H, C, O, N, and S. Determining the representative reactive structures of chemical species is crucial for identification of reactive sites and consequently applying the correct reaction templates to generate the set of important reactions during automated chemical kinetic model generation. We describe a fundamental set of resonance pathway types, accounting for simple resonating structures, as well as global approaches for polycyclic aromatic species. Automatically discovering potential localized structures along with filtration to identify the representative structures was shown to be robust and relatively fast. The algorithms discussed here were recently implemented in the Reaction Mechanism Generator (RMG) software. The final structures proposed by this method were found to be in reasonable agreement with quantum chemical computation results of localized structure contributions to the resonance hybrid.     

Studies of structural,dielectric relaxor and electrical characteristics of lead-free double Perovskite:Gd2NiMnO6

In the current communication, structural, microstructural, dielectric, relaxor, impedance, AC conductivity, and electrical modulus characteristics of double perovskite Gd₂NiMnO₆ (synthesized by a solid state reaction route) as a function of temperature (25–125 °C) and frequency (1 kHz–1MHz) have mainly been reported. From preliminary X-ray structural analysis, it is found that the crystal structure of the material is monoclinic. In temperature dependence of dielectric constant analysis, relaxor behaviour of the material was observed. Such type of behaviour is described by modified Curie–Weiss law and a Vogel–Fulcher law. From Nyquist plots, the existence of grain and grain boundary effect in the material is observed. The non–Debye type of relaxation is confirmed from the complex impedance spectroscopy. From the impedance data, the determined grain resistance reduces with increment of temperature showing negative temperature co-efficient of resistance (NTCR)-type nature of the material which also confirmed from conductivity analysis. Again, non-Debye type of relaxation phenomena is observed from the analysis of modulus spectroscopy which is also proved by complex impedance plot. From these result it may be concluded that this material may be used for different high temperature applications.     

SPME 涂层中硅烷化反应机理的研究

建立了SPME 涂层中硅烷化衍生化样品预处理方法,并用于葡萄酒中白黎芦醇的测定.SPME 硅烷化的反应动力学过程研究表明,涂层中硅烷化反应遵循假一级反应动力学,高温条件下硅烷化试剂会破坏极性聚丙烯酯(PA)涂层.     

Indium (III) Tribromide : An Excellent Catalyst for Biginelli Reaction

A highly efficient catalyst indium (III) tribromide is used to synthesize 5-alkoxy- carbonyl-4-hydrocarbyl-3,4-dihydropyrimidin-2(1H)-ones by a three-component coupling of β-keto ester, aldehydes and urea through improved Biginelli reaction.