Optimization of ultrasound-assisted extraction of bioactive compounds from wild garlic (Allium ursinum L.)

Ultrasound-assisted extraction was used for extraction of bioactive compounds and for production of Allium ursinum liquid extract. The experiments were carried out according to tree level, four variables, face-centered cubic experimental design (FDC) combined with response surface methodology (RSM). Temperature (from 40 to 80 °C), ethanol concentration (from 30% to 70%), extraction time (from 40 to 80 min) and ultrasonic power (from 19.2 to 38.4 W/L) were investigated as independent variables in order to obtain the optimal conditions for extraction and to maximize the yield of total phenols (TP), flavonoids (TF) and antioxidant activity of obtained extracts. Experimental results were fitted to the second order polynomial model where multiple regression and analysis of variance were used to determine the fitness of the model and optimal condition for investigated responses. The predicted values of the TP (1.60 g GAE/100 g DW), TF (0.35 g CE/100 g DW), antioxidant activity, IC₅₀ (0.71 mg/ml) and EY (38.1%) were determined at the optimal conditions for ultrasound assisted extraction: 80 °C temperature, 70% ethanol, 79.8 min and 20.06 W/L ultrasonic power. The predicted results matched well with the experimental results obtained using optimal extraction conditions which validated the RSM model with a good correlation.     

Application of ZnO nanorods loaded on activated carbon for ultrasonic assisted dyes removal: Experimental design and derivative spectrophotometry method

A method based on application of ZnO nanorods loaded on activated carbon (ZnO-NRs-AC) for adsorption of Bromocresol Green (BCG) and Eosin Y (EY) accelerated by ultrasound was described. The present material was synthesized under ultrasound assisted wet-chemical method and subsequently was characterized by FE-SEM, TEM, BET and XRD analysis. The extent of contribution of conventional variables like pH (2.0–10.0), BCG concentration (4–20 mg L⁻¹), EY concentration (3–23 mg L⁻¹), adsorbent dosage (0.01–0.03 g), sonication time (1–5 min) and centrifuge time (2–6 min) as main and interaction part were investigated by central composite design under response surface methodology. Analysis of variance (ANOVA) was adapted to experimental data and guide the best operational conditions mass by set at 6.0, 9 mg L⁻¹, 10 mg L⁻¹, 0.02 g, 4 and 4 min for pH, BCG concentration, EY concentration, adsorbent dosage, sonication and centrifuge time, respectively. At these specified conditions dye adsorption efficiency was higher than 99.5%. The suitability and well prediction of optimum point was tested by conducting five experiments and respective results revel that RSD% was lower than 3% and high quality of fitting was confirmed by t-test. The experimental data were best fitted in Langmuir isotherm equation and the removal followed pseudo second order kinetics. The experimentally obtained maximum adsorption capacities were estimated as 57.80 and 61.73 mg g⁻¹ of ZnO-NRs-AC for BCG and EY respectively from binary dye solutions. The mechanism of removal was explained by boundary layer diffusion via intraparticle diffusion.     

Development of a CZE method for the determination of mizolastine and its impurities in pharmaceutical preparations using response surface methodology

A fast and selective CZE method for the determination of mizolastine and related impurities is described. Response surface methodology was applied to study the influence of phosphate/triethanolamine (TEA) buffer concentration, heptakis(2,3,6-tri-O-methyl)-beta-CD (TMbetaCD) concentration, voltage and temperature. The optimum conditions were: 105 mM phosphate/TEA buffer (pH 3.0) containing 10 mM TMbetaCD, temperature 19 degrees C and voltage 30 kV. Validation of the method was performed in drug substance and drug product. Robustness was evaluated using a Plackett-Burman design, including pH among the considered factors. Applying the optimal conditions, the nine peaks were baseline separated in about 10 min. The method was applied to the quality control of mizolastine in controlled-release tablets.     

Optimisation of Hydrocortisone Production by Curvularia lunata

A new method for breeding the hydrocortisone overproducing strain Curvularia lunata by screening ketoconazole-resistance mutant was developed. A hydrocortisone overproducing mutant C. lunata KA-91 with ketoconazole-resistance marker was obtained from protoplasts treated with ultraviolet radiation. The hydrocortisone conversion rate of C. lunata KA-91 was increased by 42.1% compared to the original strain CL-114 at the substrate 17α-hydroxypregn-4-en-3, 20-dione-21-acetate addition concentration of 1.0 g/L. The by-products produced by KA-91 were fewer than those of the original strain. It was assumed that the higher cytochrome P450 content of ketoconazole-resistance mutant resulted in the increase of 11β-hydroxylation capacity. The culture conditions for biotransformation of 17α-hydroxypregn-4-en-3, 20-dione-21-acetate to hydrocortisone were optimized by response surface methodology. Plackett–Burman design was applied to elucidate the key factors affecting the hydrocortisone production, and the results indicated that glucose, initial pH, and glucose to total nitrogen sources ratio (ω) had significant effects on hydrocortisone production. Box–Behnken design was employed to search for the optimal parameters of those three key factors. According to the model, the trial checking at the optimal conditions showed a high hydrocortisone conversion rate of 82.67%.     

5个中华按蚊种群对溴氰菊酯的抗性及抗性选择反应

经浙江省 5个中华按蚊自然种群和敏感品系对溴氰菊酯抗性测定 ,发现其致死中浓度 ( LC50)都比各自的敏感品系高 ,特别是来自温州的中华按蚊 ,其抗性比率 ( RR50)达 11倍之多 . 将各自然种群的蚊虫进行抗性筛选 12代 ,发现其抗性水平与敏感品系相比 ,高达 130～ 190倍; 与其自然种群相比达 10～40倍 . 来自温州种群的抗性品系的选择性反应 ( R值 )小于 0. 1,而其它抗性品系大于 0. 1,这表明从抗性概率较高的自然种群中筛选的抗性品系 ,其抗性增加速率低于那些从抗性概率较低的自然种群中所筛选的抗性品系 ,即 5个自然种群的抗性潜能应该是相似的 . 最后对相应的蚊虫防治策略进行了讨论 .     

有界波电磁脉冲模拟器下短线缆效应的理论和实验研究

 研究了有界波电磁脉冲模拟器下短线缆效应的理论建模和实验方法。基于传输线模型计算了线缆在有界波电磁脉冲模拟器辐照下的电流响应。建立了有界波电磁脉冲模拟试验环境,其前沿时间小于5 ns,脉冲半高宽约200 ns。开展了短线缆的效应实验验证研究,短线缆负载端响应电流的测量和计算结果吻合得很好,表明应用改型有界波电磁脉冲模拟器开展短线缆效应实验在理论和实验上都是可行的。这种线缆实验方法具有效应实验空间电磁场分布规范均匀、参数指标可控、监测技术成熟等优点。     

A damage identification technique for beam-like and truss structures based on FRF and Bat Algorithm

In this paper, a Structural Health Monitoring (SHM) technique for damage identification in beam-like and truss structures using Frequency Response Function (FRF) data coupled with optimization techniques is presented. Genetic Algorithm (GA) and Bat Algorithm (BA) are used to estimate the location and severity of damage. The damage in the structures is simulated by reduction in rigidity of specific members. Both optimization techniques are coupled with modelled structures using Finite Element Method (FEM). The approach is based on minimizing an objective function by comparing measured and calculated FRFs. The results show that better accuracy is obtained using BA than using GA in terms of precision and computational time. Furthermore, it is found that the proposed approach provides faster solution than other approaches in the literature.     

Electromagnetic MUSIC-type imaging of perfectly conducting, arc-like cracks at single frequency

We propose a non-iterative MUSIC (MUltiple SIgnal Classification)-type algorithm for the time-harmonic electromagnetic imaging of one or more perfectly conducting, arc-like cracks found within a homogeneous space R²${\mathbb{R}}^2$. The algorithm is based on a factorization of the Multi-Static Response (MSR) matrix collected in the far-field at a single, nonzero frequency in either Transverse Magnetic (TM) mode (Dirichlet boundary condition) or Transverse Electric (TE) mode (Neumann boundary condition), followed by the calculation of a MUSIC cost functional expected to exhibit peaks along the crack curves each half a wavelength. Numerical experimentation from exact, noiseless and noisy data shows that this is indeed the case and that the proposed algorithm behaves in robust manner, with better results in the TM mode than in the TE mode for which one would have to estimate the normal to the crack to get the most optimal results.     

典型控制参量对铁电液晶光电响应速度的影响

利用Pspice等效电路模型, 模拟了入射光波长、温度以及激励电压频率等典型参量对铁电液晶光电响应速度的控制作用. 模拟结果表明, 在可见光范围内, 响应速度随波长的增加而减慢; 温度参量则存在一个拐点, 响应速度在该点达到极小值; 同时, 激励电压存在一个上界频率, 当频率参量取值超过界值时会对响应速度产生较大影响.     

Statistical Optimization of Alpha-Amylase Production with Immobilized Cells of <Emphasis Type="Italic">Streptomyces erumpens</Emphasis> MTCC 7317 in <Emphasis Type="Italic">Luffa cylindrica</Emphasis> L. Sponge Discs

The purpose of this investigation was to study the effect of Streptomyces erumpens cells immobilized in various matrices, i.e., agar–agar, polyacrylamide, and luffa (Luffa cylindrica L.) sponge for production of α-amylase. Luffa sponge was found to be 21% and 51% more effective in enzyme yield than agar–agar and polyacrylamide, respectively. Response surface methodology was used to evaluate the effect of three main variables, i.e., incubation period, pH, and temperature on enzyme production with immobilized luffa cells. The experimental results showed that the optimum incubation period, pH, and temperature were 36h, 6.0, and 50 °C, respectively. The repeated batch fermentation of immobilized cells in shake flasks showed that S. erumpens cells were more or less equally physiologically active on the support even after three cycles of fermentation (3,830–3,575 units). The application of S. erumpens crude enzyme in liquefying cassava starch was studied. The maximum hydrolysis of cassava starch (85%) was obtained with the application of 4ml (15,200 units) of crude enzyme after 5 h of incubation.