An easy preparation of per- and poly-fluoroalkyl propenyl sulfones

Sodium tridecafluorohexanesulfinate (1a) and sodium 1-chloro-2,2,2-trifluoroethanesulfinate (1b) were prepared by the treatment of 1-iodo-tridecafluorohexane and 1-bromo-1-chloro-2,2,2-trifluoroethane with sodium dithionite in a water-acetonitrile solution. Prolonged reaction of 1a with allyl bromide in DMF afforded tridecafluorohexane 1-propenyl sulfone 2 as the only product in good yield. A similar treatment of 1b gave exclusively 1-chloro-2,2,2-trifluoroethane 3-propenyl sulfone 4. Bromination of 4 followed by dehydrobromination with Et₃N resulted in a mixture of 1-chloro-2,2,2-trifluoroethane 3-bromo-1-propenyl sulfone 6 and 1-chloro-2,2,2-trifluoroethane 2-bromo-3-propenyl sulfone 7, while dehydrobromination with pyridine gave sulfone 6 practically as the only product. α,β-Unsaturated sulfones 2 and 6 were shown to be active dienophiles.     

Separation of mixtures of permanent gases and light hydrocarbons on spherical carbon molecular sieves by gas-solid chromatography

Summary Experimental results are presented on the application of Carbosieve S (Supelco) and Spherocarb (Analabs) spherical carbon molecular sieves for the gas chromatographic separation of mixtures of permanent gases and C₁–C₃ hydrocarbons using a single column or two columns in series. At a programmed temperature of 35–300°C, good separation of the sample components was obtained when using helium as the carrier gas. When hydrogen was used as the carrier gas and the analysis was carried out under isothermal conditions the elution sequence of oxygen and nitrogen reversed as the temperature was increased. This behaviour was observed within a temperature range of 35–225°C for Carbosieve S, and within a temperature range of 35–300°C for Spherocarb.     

Stabilisation of ultra-high molecular weight polyethylene with Vitamin E

Ultra-high molecular weight polyethylene (UHMWPE) has been the material of choice for load-bearing articular components used in total joint arthroplasty in the past 30 years. However, the durability of the whole implant has often been compromised by oxidation of UHMWPE components. Since the use of a suitable, biocompatible stabilizer would minimize this inconvenience, the possibility of adding synthetic Vitamin E to medical grade UHMWPE is currently under investigation.In the present work, medical grade UHMWPE was blended with 0.05, 0.1 or 0.5 w/w% of α-tocopherol and consolidated by compression moulding. Small blocks of reference UHMWPE and of each blend were then gamma irradiated to 30 or 100 kGy. FTIR spectroscopy was used to monitor changes in both the polymer and the additive. Thin sections of virgin and α-tocopherol doped UHMWPE irradiated and unirradiated were aged in a ventilated oven at 90 °C and the kinetic of oxidation was followed by FTIR. In addition, CL-imaging curves were recorded at 180 °C on both irradiated and unirradiated samples.Phenol loss is observed in all the α-tocopherol doped samples upon irradiation. Hypotheses on the rearrangements of the additive structure include the formation of quinonoid products. Nevertheless, all the additive-containing samples exhibit better oxidation resistance compared to the virgin material, indicating stabilizing activity of the α-tocopherol derivatives.     

The effect of the solvents on the specific intramolecular C-H...N interactions studied by1H NMR spectroscopy

The analysis of the effect of the solvents on the proton chemical shifts in¹H NMR spectra of 2-vinyloxypyridine indicates that the C—H...N interaction of weak intramolecular hydrogen bond type hinders the formation of intermolecular hydrogen C—H...X and C-H... bonds. The protonating solvents reduce the intramolecular C—H...N interaction due to association with the N atom of the pyridine cycle.Translated fromIzvestiya Akademii Nauk. Seriya Khimieheskaya, No. S, pp. 1202–1204, May, 1996.     

Conversion of 3-benzoyl-1-methyl-4-phenyl-γ-piperidol by arylamines and arylhydrazines. Synthesis of 3-arylamino-1-oxo-1-phenylpropanes and 1,3-diarylpyrazoles and their fragmentation under electron impact

It has been established that on heating, 3-benzoyl-4-hydroxy-1-methyl-4-phenylpiperidine is ring-opened in the presence of arylamines by a type of retroaldol reaction, with subsequent transamination of the intermediate Mannich base and the formation of 3-arylamino-1-oxo-1-phenylpropanes. When using arylhydrazines this γ-piperidol is recyclized with the formation of 1,3-diarylpyrazoles and their 4,5-dihydro derivatives. The mass spectral behavior of a series of 3-arylamino-substituted 1-phenylpropanones has been studied. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1486–1495, October, 2007.     

1-Acyldeoxyvasicinone salts as effective intermediate C-and N-acylating agents for alkaloids and amino acids

The reaction of deoxyvasicinone with acid chlorides of aliphatic (acetylbromide) and aromatic (benzoyl-, o-, p-methoxy-, p-nitrobenzoylchlorides) acids was studied. It was shown that 1-deoxyvasicinone salts were formed at room temperature; α-aroyloxymethylidenedeoxyvasicinones, in the presence of triethylamine at 80–85°C. It was found that acid chlorides cause 1-acyldeoxyvasicinone salts to transform into α-hydroxy-or α-aroyloxyarylidenedeoxyvasicinones, which indirectly confirmed their acylating properties. It was found that 1-acyldeoxyvasicinone salts were effective acylating agents for alkaloids (cytisine, 1,2-dihydrodeoxyvasicinone) and amino acids (glycine, β-alanine, α-aminobutyric acid) and can be used to acylate primary and secondary aliphatic and heterocyclic amines. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 585–589, November–December, 2006.     

Electronic structure and conformational flexibility of 1,2-dihydropyridine, 1,2- and 1,6-dihydropyrimidines,and their ylide derivatives

Molecular and electronic structures of 1,2-dihydropyridine, 1,2- and 1,6-dihydropyrimidine, and their oxo, imino, and methylene derivatives were studied by the semiempirical quantum-chemical AM1 method. In all compounds, the heterocycle exhibits a high conformational flexibility. The transition from a planar equilibrium conformation to a distorted sofa conformation with the =C-NH-C-C(N)= torsion angle of ±20° causes an increase in the energy by less than 1.7 kcal mol^–1. All molecules have similar -electronic structures, which, apparently, determines the similarity in their conformational behavior. The bending strain and the nonaromatic character of the cyclic -system are the factors that stabilize the nonplanar conformation of the ring in unsubstituted dihydroazines and ylide derivatives, respectively.Translated fromIzvestiva Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1934–1937, August, 1996.     

Phosphonates containing sulfur and selenium. Synthesis of vinylphosphonates bearing α-sulfenyl, α-selenenyl, α-sulfinyl and α-seleninyl moieties and studies on nucleophilic addition

The selenenylation of racemic and optically active α-phosphoryl sulfoxides is a key step leading efficiently to α-phosphorylvinyl sulfoxides or α-phosphorylvinyl selenides depending on the reaction conditions. Oxidation of α-phosphorylvinyl selenides and subsequent thermolysis of selenoxides afford alkynylphosphonates. Studies of the stereochemical course of nucleophilic addition to α-phosphoryl sulfoxides show high facial stereoselectivity of the reaction, however, epimerisation at the α-carbon atom leads to mixtures of diastereomers.     

Racemization of chiral amino alcohols III: Effect of Mg or Ca addition on the activity and stability of the Co/γ-Al2O3 catalyst

The racemization of R-(-)-2-amino-1-butanol in a reaction using Co/γ-Al₂O₃ catalysts and catalysts modified by Mg or Ca was investigated in this paper. Complete racemization was achieved with a yield of over 83% at using the Mg modified Co/γ-Al₂O₃ catalyst under optimized reaction conditions of 170°C and 2.5 MPa of H₂. The catalysts were thoroughly characterized by XRD, XPS, TPR, SEM and TEM. The addition of Mg and Ca may be advantageous for dispersing and stabilizing the active species of the Co/γ-Al₂O₃ catalyst, protecting from sintering, significantly improving its catalytic activity and stability.     

Durbin-Watson statistic as a morphological estimator of information content

The present work proposes a new approach for the evaluation of the information content in latent variables, and therefore, for the determination of the regression model dimensionality. Several examples are provided, using simulated, real-world, and reference datasets. The results showed that the application of the Durbin-Watson (DW) criterion could be used for the determination of the number of latent variables. Moreover, the method is straightforward in its implementation and could help in the understanding of model behaviour, particularly in complex datasets. A comparison is made with cross-validation techniques for the case of reference datasets, showing the potential of the Durbin-Watson criterion in the characterisation of the regression model. The advantages and disadvantages of this procedure (compared to cross-validation) are discussed. The properties of the information content of the regression vectors (loadings p, w and b vectors) are shown as well as how to use them for the current purpose.