Low-frequency noise in analytical soil measurements

Fourier analysis of the real-time quality-control charts for colorimetric, photometric, and pH soil measurements shows 1/f ⁿ (n=1±0.05) noise intensity dependence on frequency, in correspondence to the earlier test for atomic absorption measurements. In addition, the prevailing character of the sample preparation in the general noise frequency dependence is clearly demonstrated. Some important analytical problems are addressed where knowledge of the specific character of the time variation in the analytical data sets is essential.     

Characterization of capillary inner surface conditions with streaming potential

Streaming potential is created when an electrolyte solution is forced to flow pass a charged surface. For an uncoated fused silica capillary, the streaming potential is measured between the inlet and outlet vials while applying a pressure across the capillary. The changes in streaming potential can be used to characterize the properties of the capillary inner surface. In this work, HCl, NaCl, and NaOH solutions ranging from 0.4 to 6 mM were used as the background electrolyte (BGE) at temperatures of 15 to 35 °C for the mesurements. The streaming potential decreases with the increase in BGE concentration, and the trend is amplified at higher temperatures. When buffer solutions in the pH range of 1.5 to 12.7 were used as the BGE, streaming potential was shown to be sensitive to changes in pH but reaches a maximum at around 9.5. At pH < 3.3, no streaming potentials were observed. The pH of zero surface charge (streaming potential equals 0) changes with temperature, and is measured to be 3.3 to 3.1 when the temperature is changed from 15 to 35°C. Zeta potentials can be calculated from the measured streaming potential, conductivity, and the solution viscosity. Surface charge densities were calculated in this work using the zeta potentials obtained. We demonstrated that capillary surface conditions can significantly change the streaming potential, and with three different solutions, we showed that analyte-dependent adsorption can be monitored and mitigated to improve the peak symmetry and migration times reproducibility.     

Identification of non-idealities in gel electrophoresis

The molecular weight separation, which is the second dimension of two-dimensional gel electrophoresis, is studied quantitatively with the goal of improving positional predictability and reproducibility. Mathematical modeling of carrier electrolyte dynamics is used to track the progress of a stacking front as a function of coulombs passed. In all test cases, the front moves more slowly than predicted and shows both curvature and tilt. These systematic deviations from the model are found to be influenced by a variety of factors, including both design and operating features. These factors are largely explained, and suggestions are made for improvements.     

Simple conversion of two standard gas chromatographs to all-glass capillary systems

Two regular GC instruments were modified with injection port liners, split-mode injection systems, pressure regulators, effluent traps and needle valves to produce an all-glass GC-2 system. This simple and inexpensive system allows the quantitative analyses of phenols, hydrocarbons, acids, sterols, terpenoids, and alkaloids with excellent reproducibility and linear response. Even more impressive was its ability to analyze a C₄₅-terpenoid alcohol, solanesol, as its TMS-derivative (M.W. 702).     

ToF-SIMS study on the cleaning methods of Au surface and their effects on the reproducibility of self-assembled monolayers

The production of reproducible self-assembled monolayers (SAMs) is essential to many nano(bio)technology applications. To check the effects of different cleaning methods on a reproducible SAMs formation, the cleaning methods were varied and then used for preparing each SAM. The reproducibility of each SAM was examined by ToF-SIMS analysis along with principal component analysis (PCA). Using what we found to be a superior method of cleaning gold surfaces, alkanethiol SAMs with different terminal groups such as 1-dodecanethiol (DDT), 11-mercaptoundecanoic acid (MUA), 11-mercapto-1-undecanol (MUD) were reproduced. Our statistical results show that reproducible alkanethiol SAMs on a well-cleaned gold surface can be produced within only a few standard deviation percentages obtained from point-to-point and sample-to-sample spectra.     

热动力学的研究(Ⅵ)——环氧氯丙烷开环反应的热动力学

本文在前文所建立的热动力学方程和无量纲参数研究法的基础上,对较为复杂的环氧氯丙烷开环反应的研究,扩大了热动力学的研究范围。早在1929年,Bronsted等采用特殊的实验方法,对环氧乙烷及类似化合物进行了较为全面的研究,并测定了在盐酸溶液中,环氧乙烷等化合物可能发生的各种开环反应的速度常数。本文测定了环氧氯丙烷与碘化钾在磷酸盐缓冲液中的开环反应     

The role of the sample standard deviation in the analysis of measurement data

This paper builds on recent letters to the editor to consider different ways in which the ‘sample standard deviation’ of a set of repeated measurements might be used in the expression of accuracy or uncertainty. A distinction is made between using the sample standard deviation, s, to calculate a figure of merit for the measurement procedure and using s to express uncertainty in the estimate of a measurand. In particular, we consider whether s should be adjusted for bias. It is shown that most procedures involving s are valid without the application of any such adjustment. The paper emphasizes the importance of clear definitions and an unambiguous statement of purpose, and also emphasizes the need for a distinction in notation between a random variable and its observed value.     

A review of techniques for the determination of polycyclic aromatic hydrocarbons in air

We provide an extensive review of the common methodologies employed in the analysis of airborne polycyclic aromatic hydrocarbons (PAHs). The review focuses on gas-chromatography-based approaches, in the light of their universal application with excellent separation, resolution, and sensitivity.We first describe collection methods for airborne PAHs in the gas and particle phases. We then evaluate the efficiency of extraction techniques employed for separating target PAHs from sampling media, using conventional solvent-based and emerging thermal-desorption approaches.We also describe commonly employed analytical methods with respect to their applicability to PAHs in gas and particle phases, collected from diverse environmental settings. As an essential part of basic quality assurance, we examine each method with special emphasis on key parameters (e.g., limit of detection and reproducibility).Finally, we address the likely directions of methodological developments, their limitations, and the future prospects for PAH analysis.     

Highly reproducible surface-enhanced Raman scattering-active Au nanostructures prepared by simple electrodeposition: Origin of surface-enhanced Raman scattering activity and applications as electrochemical substrates

The fabrication of effective surface-enhanced Raman scattering (SERS) substrates has been the subject of intensive research because of their useful applications. In this paper, dendritic gold (Au) rod (DAR) structures prepared by simple one-step electrodeposition in a short time were examined as an effective SERS-active substrate. The SERS activity of the DAR surfaces was compared to that of other nanostructured Au surfaces with different morphologies, and its dependence on the structural variation of DAR structures was examined. These comparisonal investigations revealed that highly faceted sharp edge sites present on the DAR surfaces play a critical role in inducing a high SERS activity. The SERS enhancement factor was estimated to be greater than 10⁵, and the detection limit of rhodamine 6G at DAR surfaces was 10⁻⁸ M. The DAR surfaces exhibit excellent spot-to-spot and substrate-to-substrate SERS enhancement reproducibility, and their long-term stability is very good. It was also demonstrated that the DAR surfaces can be effectively utilized in electrochemical SERS systems, wherein a reversible SERS behavior was obtained during the cycling to cathodic potential regions. Considering the straightforward preparation of DAR substrates and the clean nature of SERS-active Au surfaces prepared in the absence of additives, we expect that DAR surfaces can be used as cost-effective SERS substrates in analytical and electrochemical applications.     

Enhancement of sensitivity in capillary supercritical fluid chromatography through optimization of injection and detection techniques

The reproducibility of peak areas as a function of the technique used for sample injection was investigated in capillary supercritical fluid chromatography (SFC). An injection technique has been developed to increase the volume of sample introduced into the capillary column. Using a modified time-split injection technique, long injection duration times were successfully applied to achieve lower detection limits. Analytes were effectively focused at the head of the analytical column using a unique pressure trap program. Because this on-column focusing was performed only by pressure and temperature programming, no instrumental modifications were necessary. Up to 1.0 μL of sample solution was injected onto 50 μm i.d. columns using this technique, with no observable peak splitting. Dual detection using ultraviolet (UV) absorption and flame ionization detection (FID) was performed in series, thereby avoiding the necessity of splitting the column effluent. For the compounds investigated (five nitroaromatics and one phthalate ester), the absolute sensitivity of the UV detector was significantly greater than that of the FID.