原子吸收及紫外分光光度法再现性与浓度的一个新型关系式

本文提出了紫外及原子吸收分光光度法中再现性与浓度的一个新型关系式。以实验和文献数据对该式进行了验证,结果表明,该式对实验数据的拟合明显优于文献的关系式,并对该式各参数的意义进行了探讨。     

Reproducibility in capillary supercritical fluid chromatography: Comparison of injection techniques

An analysis of the precision obtained using commercially available microvalve injectors is reported for three modes of injection: conventional split; timed-split; and direct. Results from this study show that good precision (< 3% RSD for external standard and < 1% RSD for internal standard methods) can be obtained with capillary supercritical fluid chromatography (SFC). However, particular attention must be paid to the type of valve used, the orientation of the column relative to the valve, the mode of interfacing or connecting the column to the valve, and the type of pressure or density programming used for the analysis as all of these factors will affect the reproducibility.     

Comparison of three sequential extraction procedures to describe metal fractionation in anaerobic granular sludges

In the last few decades, several sequential extraction procedures have been developed to quantify the chemical status of metals in the solid phase. In this study, three extraction techniques (modified [A. Tessier, P.G.C. Campbell, M. Bisson, Anal. Chem. 51 (1979) 844]; [R.C. Stover, L.E. Sommers, D.J. Silvera, J. Water Pollut. Con. F. 48 (1976) 2165]; and the Bureau Communautaire de Reference (BCR) [K.F. Mossop, C.M. Davidson, Anal. Chim. Acta 478 (2003) 111]) were applied to study the distribution of trace (Co, Ni, Zn and Cu) and major (Mn and Fe) elements in two different anaerobic granular sludges from full-scale methanogenic wastewater treatment plants. The Stover scheme displayed a higher number of fractions that induces a poor recovery compared to the other schemes. The sequential extraction scheme recommended by BCR and the modified Tessier scheme gave similar trends and are sufficiently repeatable and reproducible for application in fractionation studies. However, the BCR scheme seems to be of limited utilisation to study anaerobic matrixes because the extraction stage for its reducible fraction may release substantial amounts of trace elements bound to the organic/sulfides fraction, and consequently, the recovery of trace elements in the oxide fraction may be overestimated at the expense of the oxidisable fraction. As a final conclusion, the modified Tessier scheme seems to be the most suitable scheme to study the metal partitioning in anaerobic granular sludges.     

Reproducibility of the gadolinium concentration measurements and of the fitting parameters of the vascular input function in the superior sagittal sinus in a patient population

It is widely recognised that the measurement of the arterial input function (AIF) is a key issue and a major source of errors in the pharmacokinetic modelling of dynamic, contrast-enhanced magnetic resonance imaging (DCE-MRI) data, and the modality of the AIF determination is still a matter of debate. In this study we addressed the problem of the intrinsic variability of the AIF within the imaged volume of a DCE-MRI scan by systematically investigating the change in the concentration of contrast agent over time and the fit parameters of the derived vascular input function (VIF) obtained from the superior sagittal sinus (SSS) of a patient population that was scanned longitudinally during treatment for high grade glioma. From a total of 82 scanning sessions, we compared the results obtained with three different DCE-MRI protocols and between two different fitting functions. We applied a correction algorithm to the measured concentration-time curves to minimize the effect of the low temporal resolution on the VIF, and investigated the effect of this algorithm on the reproducibility. Finally, where possible, we compared the signal obtained in the SSS to the signal obtained in the middle cerebral artery. We found a good intrapatient reproducibility of both the measured gadolinium concentrations and VIF parameters, and that the variation of the parameters due to slice location within a patient was significantly lower than the intra patient variation. Intrapatient, interscan differences were significantly less marked than inter-patient differences showing a good intraclass correlation coefficient. We did encounter a MRI protocol dependence of the VIF fitting parameters. The correction algorithm significantly improved the reproducibility of the fitting parameters. These results support the idea that the use of a patient specific measured AIF, not necessarily averaged over a large volume, offers a significant benefit with respect to an external AIF or a measured cohort average AIF.     

Reproducibility of the quantitative assessment of cartilage morphology and trabecular bone structure with magnetic resonance imaging at 7 T

To assess the reproducibility of quantitative measurements of cartilage morphology and trabecular bone structure of the knee at 7 T, high-resolution sagittal spoiled gradient-echo images and high-resolution axial fully refocused steady-state free-precession (SSFP) images from six healthy volunteers were acquired with a 7-T scanner. The subjects were repositioned between repeated scans to test the reproducibility of the measurements. The reproducibility of each measurement was evaluated using the coefficient(s) of variation (CV). The computed CV were 1.13% and 1.55% for cartilage thickness and cartilage volume, respectively, and were 2.86%, 1.07%, 2.27% and 3.30% for apparent bone volume over total volume fraction (app.BV/TV), apparent trabecular number (app.Tb.N), apparent trabecular separation (app.Tb.Sp) and apparent trabecular thickness (app.Tb.Th), respectively. The results demonstrate that quantitative assessment of cartilage morphology and trabecular bone structure is reproducible at 7 T and motivates future musculoskeletal applications seeking the high-field strength's superior signal-to-noise ratio.     

Solution combustion synthesis,energy and environment: Best parameters for better materials

Solution combustion synthesis (SCS) is a worldwide used methodology for the preparation of inorganic ceramic and composite materials with controlled properties for a wide number of applications, from catalysis to photocatalysis and electrocatalysis, from heavy metal removal to sensoristics and electronics. The high versatility and efficiency of this technique have led to the introduction of many variants, which allowed important optimization to the prepared materials. Moreover, its ecofriendly nature encouraged further studies about the use of sustainable precursors for the preparation of nanomaterials for energy and environment, according to the concept of circular economy. On the other hand, the large variety of expressions to define SCS and the often-contradictory definitions of the SCS parameters witnessed a scarce consciousness of the potentiality of this methodology. In this review article, the most important findings about SCS and the selection criteria for its main parameters are critically reviewed, in order to give useful guidelines to those scientists who want to use this methodology for preparing materials with improved or new functional properties. This review aims as well (i) to bring more clarity in the SCS terminology (ii) to increase the awareness of the SCS as a convenient tool for the synthesis of materials and (iii) to propose a new perspective in the SCS, with special attention to the use of ecofriendly procedures. Part of the review is also dedicated to precautions and limitations of this powerful methodology.     

Do we need to rethink collaborative trials?

The currently recommended design of collaborative trials (interlaboratory method performance studies) is examined in relation to the usefulness of the resulting statistics. It is suggested that larger experiments, without duplicate analysis, would be more informative.

Precision of Raman depolarization and optical attenuation measurements of sound tooth enamel

The demineralization of enamel that is associated with early caries formation affects the optical properties of the enamel. Polarized Raman spectroscopy and optical coherence tomography have been used to detect these changes and potentially offer a means to detect and monitor early caries development. The total optical attenuation coefficient as measured by optical coherence tomography and the polarization anisotropy of the Raman peak arising from the symmetric ν₁ vibration of at approximately 959 cm⁻¹ have been demonstrated as being sensitive markers of early caries. This ex vivo study on extracted human teeth demonstrates that these measurements can be made with reasonable precision with concomitantly good repeatability and reproducibility in sound enamel. Such reliability is crucial for these techniques to have a practical clinical value.     

Replicated observations in metrology and testing: modelling repeated and non-repeated measurements

In order to choose the right statistical tool, a basic issue for an accurate analysis of each specific problem is to understand whether the set of replicated measurement results under examination is to be considered as pertaining to repeated measurements or not. This issue is particularly important, since most of the traditional tools are valid only for repeated measurements, but, in many cases, such as laboratory comparisons (in metrology and in testing), the measurements necessary to assess correctly the measurand value and the associated uncertainty do not represent repeated measurements. The analysis performed in this paper aims to shine some light on these issues, starting with a review of the basic concepts, such as repeatability, reproducibility, accuracy, systematic error and bias, as defined in international documents and as used in the literature. The paper shows that, currently, a full consensus on a common language and understanding has not yet been achieved, and then shows how this fact reflects on the basic data models, especially those concerning inter-comparison data.