The structure of diluted binary solutions of amides according to the heat capacity data

The specific heat capacities of hexamethylphosphoric triamide, diethylpropionamide, their aqueous solutions, and mixtures of hexamethylphosphoric triamide with formamide were measured in the temperature range from 288.15 to 318.15 K. The dependences of the partial molar heat capacity of aqueous solutions of amides on the composition of the mixture have maxima in the region of 0.02–0.04 molar fractions of amide. The maximum on a similar dependence for solutions of hexamethylphosphoric triamide corresponds to the concentration of 0.01 molar fractions. The conclusion on the formation of solvates (hydrates) in the systems studied was made. The heat capacity coefficients of pair and triple interactions were calculated in terms of the McMillan-Mayer theory. A change in the heat capacity characteristics with the temperature change was analyzed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2479–2483, December, 1998.     

Quantum-Chemical Evaluation of the Protolytic Properties of Thiophenols

The enthalpies and free energies of proton affinity (PA) were calculated by the PM3 method for 27 thiophenoxide anions. For thiophenols, linear correlation has been found between the PAs and the values of pK _a measured by different authors in aqueous acetone, aqueous ethanol, and methanol media. The dependences found permit one to predict a priori the protolytic properties of thiophenols. The differential effects of aqueous ethanol media with different ethanol contents on thiophenol acidity were evaluated based on quantum-chemical data.Original Russian Text Copyright © 2004 by A. N. Pankratov and A. V. Shalabai__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 800–806, September–October, 2004.     

Potentiometric studies on the complexation of copper(II) by phenolic acids as discrete ligand models of humic substances

Studies on the complexation of copper(II) by phenolic acids, as ligand models of humic substances were done by potentiometry. The acids under study were: 3,4-dihydroxyhydrocinnamic acid or hydrocaffeic acid (1), 3,4-dihydroxyphenylacetic acid (2) and 3,4-dihydroxybenzoic acid or protocatechuic acid (3). Acidity constants of the ligands and the formation constants of metal-ligand complexes were evaluated by computer programs. The carboxylic group of the phenolic acids has different pK_a1 values, being the dissociation constants intrinsically related with the distance between the function and the aromatic nucleus. The results obtained allow concluding that acidity constants of the catechol moiety of the compounds are similar with pK_a2 and pK_a3 values between 9.47-9.41 and 11.55-11.70. The complexation properties of the three ligands towards copper(II) ion are quite similar, being the species found not different either in nature or stability. Although the model ligands have some structural differences no significant differences were found in their complexation properties towards copper(II). So, it can be postulated that complexation process is intrinsically related with the presence of a catechol group.     

Bienzyme Sensor Based on an Oxygen Reducing Bilirubin Oxidase Electrode

Based on an oxygen reducing electrode combining bilirubin oxidase and multiwalled carbon nanotubes modified gold (BOD‐MWCNT‐Au electrode) a bienzyme sensor is developed. Therefore the BOD‐MWCNT‐Au electrode is covalently coupled to enzymes catalysing oxygen‐consuming reactions (glucose oxidase and ascorbate oxidase) to result in a membrane‐free bienzyme electrode. The electrochemical characterisation of these bienzyme sensors reveals an enzyme substrate sensitivity down to 250 μM glucose and 100 μM ascorbate. In addition, the assembled sensor systems allow amperometric measurements in a potential range where the influence of interfering substances reacting directly at the transducing electrode is minimised. The results indicate that the BOD electrode provides a suitable platform for sensing analytes of medical and environmental interest for which oxidases of high activity are available.     

Uncertainty of measurement for summed masses: application to controlled substances

Because sentences for drug possession depend on the mass of the seized drug, testing laboratories must often determine the summed mass of numerous items submitted under a single case. One common practice for this purpose is to continue analyzing and weighing samples until a legal threshold is passed, at which point it is important to inform the court whether the summed mass is significantly above the threshold, or only marginally so. This paper develops a means for estimating the uncertainty of the summed mass for the common situation where the readability, d, of the balance dominates the uncertainty. It is seen that for all sample sizes the uncertainty, UM, is given by the remarkable simple expression UM = (d/2) × [N + SQRT(3N)] + N × CCE, where N is the number of items and CCE is the absolute value of the calibration check error. In most instances, this can be further simplified to UM = N × d.     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.     

氟甲砜霉素注射液含量及其有关物质的HPLC测定

为建立测定氟甲砜霉素注射液含量的方法,采用高效液相色谱法,选用Agilent EclipseXDB-C8柱(4.6 mm×250 mm,5μm),Lab Alliance C8保护柱(4.6 mm×10 mm,5μm),流动相为(V乙腈) V(水)=35 65,流量1.0 mL.min-1,检测波长224 nm,进量样20μL,柱温为室温。结果表明,方法的线性范围为10.0～400μg.mL-1(r=0.999 6),最低检测限2.0 ng。回收率98.7%～101.2%,RSD 0.30%～1.22%(n=5)。方法简便灵敏,结果准确可靠,可用于氟甲砜霉素注射液的质量控制。     

Nucleophilic reactivity of the peroxide anion in aqueous-alcoholic solutions in the presence of detergents

The reactivity of hydroxide and peroxide anions with 4-nitrophenyl N,N-dimethylcarbamate in aqueous-alcoholic detergent media and in “oil in water” microemulsions has been studied. Aqueous-alcoholic solutions of cationic (CTAB) and neutral (Triton X-100) surface active substances have promise for decomposition of substrates by a nucleophilic mechanism. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 358–363, November–December, 2007.     

3类高关注紫外线吸收剂的前处理与检测技术研究进展

紫外线吸收剂是一种具有强烈吸收紫外线作用的光稳定剂,会对生态环境以及人体健康造成危害,国内外许多国家已制定相关法规限制其使用。该文综述了近几年来国内外关于二苯甲酮类、三嗪类和苯并三唑类3类紫外线吸收剂检测的研究现状,分别对样品前处理与检测技术进行了详细介绍,并对其研究发展趋势进行了展望。     

Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC–MS method

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-μm particle) and mobile phase. Mobile phase A contained KH₂PO₄ buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 μL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r² = 0.9995–0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC–MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.