Raman and mid‐IR spectroscopic study of the magnesium carbonate minerals—brugnatellite and coalingite

Two hydrated hydroxy magnesium carbonate minerals brugnatellite and coalingite with a hydrotalcite‐like structure were studied by Raman spectroscopy. Intense bands are observed at 1094 cm⁻¹ for brugnatellite and at 1093 cm⁻¹ for coalingite attributed to the CO₃²⁻ν₁ symmetric stretching mode. Additional low intensity bands are observed at 1064 cm⁻¹. The existence of two symmetric stretching modes is accounted for in terms of different anion structural arrangements. Very low intensity bands at 1377 and 1451 cm⁻¹ are observed for brugnatellite, and the Raman spectrum of coalingite displays two bands at 1420 and 1465 cm⁻¹ attributed to the (CO₃)²⁻ν₃ antisymmetric stretching modes. Very low intensity bands at 792 cm⁻¹ for brugnatellite and 797 cm⁻¹ for coalingite are assigned to the CO₃²⁻ out‐of‐plane bend (ν₂). X‐ray diffraction studies by other researchers have shown that these minerals are disordered. This is reflected in the difficulty of obtaining Raman spectra of reasonable quality and explains why the Raman spectra of these minerals have not been previously or sufficiently described. A comparison is made with the Raman spectra of other hydrated magnesium carbonate minerals. Copyright © 2008 John Wiley & Sons, Ltd.     

激光烧蚀制备分布反馈式有机激光器件

采用激光烧蚀的方法结合激光全息技术,直接在高分子聚合物MEH-PPV薄膜表面烧蚀光栅结构,制备了分布反馈式有机激光器。这一方法具有工艺简单、光栅参数的可控性和重复性好等优点。器件MEH-PPV的膜厚是400 nm。利用波长为355 nm的Nd-YAG纳秒激光器进行单脉冲烧蚀,获得的光栅周期和光栅高度分别为370 nm和 100 nm。利用飞秒激光放大器作为泵浦源激射DFB激光器件,得到激射阈值约为182 μJ·cm^-2·pulse^-1,光谱的波峰约在609 nm处,半高宽为4.2 nm。通过改变两光束的夹角获得了周期为360, 370, 380, 390 nm的光栅,它们对应的激光波峰分别为602.91, 609.24, 613.26, 619.01 nm。     

Brillouin scattering of light by spin waves in ferromagnetic nanorods

We report the investigations of spin wave modes of arrays of Ni and Co nanorods using Brillouin light scattering. We have revealed the significant influence of spin wave modes along the nanorod axis in contrast to infinite magnetic nanowires. Unusual optical properties featuring an inverted Stokes/anti-Stokes asymmetry of the Brillouin scattering spectra have been observed. The spectrum of spin wave modes in the nanorod array has been calculated and compared with the experiment. Experimental observations are explained in terms of a combined numerical–analytical approach taking into account both the low aspect ratio of individual magnetic nanorods and dipolar magnetic coupling between the nanorods in the array. The optical studies of spin-wave modes in nanorod metamaterials with low aspect ratio nanorods have revealed new magnetic and magneto-optical properties compared to continuous magnetic films or infinite magnetic nanowires. Such magnetic artificial materials are important class of active metamaterials needed for prospective data storage and signal processing applications.     

Thermal and photochemical reactivity of oxygen atoms on gold nanocluster surfaces

Reduction of oxidized gold nanoclusters by exposures to foreign gases and irradiation of UV photons has been investigated using X-ray photoelectron spectroscopy. Gold nanoclusters with narrow size distributions protected by alkanethiolate ligands were deposited on a TiO₂(1 1 0) surface with dip coating. Oxygen plasma etching was used for removal of alkanethiolate ligands and oxidization of gold clusters. The oxidized gold clusters were exposed to CO, C₂H₂, C₂H₄, H₂, and hydrogen atoms. Although, C₂H₄ and H₂ did not show any indications of reduction of oxidized gold clusters, CO, C₂H₂, and hydrogen atoms reduced the oxides on gold cluster surfaces. Among them, hydrogen atoms were most effective for reduction. Irradiation of UV photons around 400 nm could also reduce the oxidized gold clusters. The photochemical reduction mechanism was proposed as follows. The photo-reduction was initiated by electronic excitation of gold clusters and oxygen atoms activated reacted with carbon atoms at the surfaces of gold clusters. Carbon species were likely absorbed in gold clusters or remained at the boundaries between gold clusters when gold clusters agglomerated during oxygen plasma exposures. As the photochemical reduction progressed, carbon atoms segregated to the surfaces of gold clusters.     

Adsorption kinetics of alkanes on TiO2 nanotubesarray - structure-activity relationship

Presented are thermal desorption spectroscopy (TDS) measurements of iso-/n-butane adsorption on a variety of TiO₂ nanotubes (TiNTs) samples which are characterized by different crystal structures. The results are compared with a prior study on anatase(0 0 1) thin films grown on SrTiO₃(0 0 1). A distinct kinetic structure-activity relationship was present, i.e., the binding energies of the alkanes depend on the polymorph (anatase vs. mixed anatase/rutile) of TiO₂. A direct-fitting procedure of the TDS data has been applied to extract the kinetics parameters. The binding energies in the limit of zero coverage decrease as anatase thin film > amorphous-TiNTs ∼ polycrystalline anatase TiNTs > polycrystalline mixed anatase/rutile TiNTs.     

Thermodynamics of nitrogen adsorption on the zeolite H-FER

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-FER results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted acid groups. This hydrogen bonding interaction leads to activation, in the IR, of the fundamental NN stretching mode, which appears at 2331 cm⁻¹. From the infrared spectra taken over a temperature range, while simultaneously recording integrated IR absorbance, temperature and nitrogen equilibrium pressure, the thermodynamics of the adsorption process was studied. The standard adsorption enthalpy and entropy resulted to be ΔH° = −20(±1) kJ mol⁻¹ and ΔS° = −131(±10) J mol⁻¹ K⁻¹, respectively.     

XPS investigations of ruthenium deposited onto representative inner surfaces of nuclear reactor containment buildings

In the case of a hypothetical severe accident in a nuclear power plant, interactions of gaseous RuO₄ with reactor containment building surfaces (stainless steel and epoxy paint) could possibly lead to a black Ru-containing deposit on these surfaces. Some scenarios include the possibility of formation of highly radiotoxic RuO₄(g) by the interactions of these deposits with the oxidizing medium induced by air radiolysis, in the reactor containment building, and consequently dispersion of this species. Therefore, the accurate determination of the chemical nature of ruthenium in the deposits is of the high importance for safety studies. An experiment was designed to model the interactions of RuO₄(g) with samples of stainless steel and of steel covered with epoxy paint. Then, these deposits have been carefully characterised by scanning electron microscopy (SEM/EDS), electron probe microanalysis (EPMA) and X-ray photoelectron spectroscopy (XPS). The analysis by XPS of Ru deposits formed by interaction of RuO₄(g), revealed that the ruthenium is likely to be in the IV oxidation state, as the shapes of the Ru 3d core levels are very similar with those observed on the RuO₂·xH₂O reference powder sample. The analysis of O 1s peaks indicates a large component attributed to the hydroxyl functional groups. From these results, it was concluded that Ru was present on the surface of the deposits as an oxyhydroxide of Ru(IV). It has also to be pointed out that the presence of “pure” RuO₂, or of a thin layer of RuO₃ or Ru₂O₅, coming from the decomposition of RuO₄ on the surface of samples of stainless steel and epoxy paint, could be ruled out. These findings will be used for further investigations of the possible revolatilisation phenomena induced by ozone.     

X-ray photoelectron spectroscopy studies on core-shell structured nanocomposites

Core-shell nanostructures were grown in silica-based glasses. Copper-copper oxide and iron-iron oxide structures had diameters in the range 3-6 nm, with shell thicknesses ∼1-2 nm. Silver-lithium niobate core-shell nanostructures had diameters in the range 4.2-46 nm and thicknesses varying from 2.2 to 22 nm. X-ray photoelectron spectroscopy studies were carried out on all these specimens. The analyses of these results show the presence of Cu⁺/Cu²⁺, Fe²⁺/Fe³⁺ and Nb⁴⁺/Nb⁵⁺ valence states in the above three systems. Electrical resistivity data were fitted satisfactorily to the small polaron hopping model in the case of copper and iron-containing specimens. The presence of ions in the lithium niobate shell provides direct evidence of the formation of localized states between which variable range hopping conduction can be effected.     

Morphological and chemical study of the initial growth of CdS thin films deposited using an ammonia-free chemical process

We study the initial growth stages of CdS thin films deposited by an ammonia-free chemical bath deposition process. This ammonia-free process is more environmentally benign because it reduces potential ammonia release to the environment due to its high volatility. Instead of ammonia, sodium citrate was used as the complexing agent. We used atomic force microscopy (AFM), Rutherford backscattering (RBS) and X-ray photoelectron spectroscopy (XPS) to investigate the morphological and chemical modifications at the substrate surface during the first initial stages of the CdS deposition process. Additionally, X-ray diffraction (XRD) and optical transmission spectroscopy measurements were carried out to compliment the study. XPS results show that the first nucleation centers are composed by Cd(OH)₂ which agglomerate in patterns of bands, as demonstrated by AFM results. It is also observed that the conversion to CdS (by anionic exchange) of the first nucleus begins before the substrate surface is completely covered by a homogenous film.     

Wavelength-agile H2O absorption spectrometer for thermometry of general combustion gases

Using a novel Fourier-domain mode-locking (FDML) laser scanning 1330-1380 nm, we have developed a gas thermometer based on absorption spectroscopy that is appropriate for combustion gases at essentially arbitrary conditions. The path-integrated measurements are particularly useful in homogeneous environments, and here we present measurements in a controlled piston engine and a shock tube. Engine measurements demonstrate a RMS temperature precision of ±3% at 1500 K and 200 kHz bandwidth; the precision is improved dramatically by averaging. Initial shock tube measurements place the absolute accuracy of the thermometer within ∼2% to 1000 K. The sensor performs best when significant H₂O vapor is present, but requires only at 300 K, at 1000 K, or at 3000 K for 2% accurate thermometry, assuming a 4 kHz measurement bandwidth (200 kHz scans with 50 averages). The sensor also provides H₂O mole fraction and shows potential for monitoring gas pressure based on the broadening of spectral features. To aid in designing other sensors based on high-temperature, high-pressure H₂O absorption spectroscopy, a database of measured spectra is included.