New feature in the Auger peak of adsorbed oxygen

Recent joint theoretical and experimental investigations of Auger core-core-valence spectra of alkali adatoms on simple metals have revealed that such technique is capable to ascertain contributions from different adsorption environments in the signal [M.I. Trioni, S. Caravati, G.P. Brivio, L. Floreano, F. Bruno, A. Morgante, Phys. Rev. Lett. 93 (2004) 206802]. Consequently, to verify if such an effect is present also for other chemical species, we study theoretically the KLV transition of oxygen either as a bulk impurity or as an adsorbate in/on Al and Ag (jellium-like). We make use of the Fermi golden rule in which the matrix elements of the interaction are calculated within DFT. We verify that the relevant physical quantity of this phenomenon is the excited local density of states (LDOS), calculated within a region centered on the core ionized atom. The Auger rate for oxygen in Ag bulk displays a single asymmetric peak, while for adsorbed oxygen a second smaller feature at lower energies, and very close to the first one, appears. This unexpected result follows from the removal of the degeneracy of the m quantum number of the 2p states of oxygen at the surface. It is only displayed on the electronically less dense metal (Ag), but not on Al.     

无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

傅里叶变换红外光谱与拉曼光谱分析碳青霉烯药物亚胺培南的结构特征

本文采用傅里叶变换红外光谱和激光拉曼光谱对碳青霉烯药物亚胺培南进行光谱检测,并对其的分子振动光谱与结构特征进行分析和探讨,分析了亚胺培南在固相状态下的结构形式,从而为药物合成及质量控制提供了重要的参考价值。     

Holographic interferometry as electrochemical emission spectroscopy of a carbon steel in 5–20 ppm TROS C-70 inhibited seawater

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of a carbon steel in blank seawater and seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, as an electromagnetic method, and by the electrochemical impedance (EI) spectroscopy, as an electronic method. So, the abrupt rate change of the number of the fringe evolutions during corrosion tests, EI spectroscopy, of the carbon steel is called electrochemical emission spectroscopy. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of TROS C-70 corrosion inhibitor using the EI spectroscopy method, at room temperature. The electrochemical-emission spectra of the carbon steel in different solutions represent a detailed picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data, which was obtained from the EI. spectroscopy. Consequently, holographic interferometry is found very useful for monitoring the anodic dissolution behaviors of metals, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

Structural and lithium intercalation studies of Mn(0.5−x)CaxTi2(PO4)3 phases (0≤x≤0.50)

Materials from the Mn_(0.5−x)Ca_xTi₂(PO₄)₃ (0≤x≤0.50) solid solution were obtained by solid-state reaction in air at 1000 °C. Selected compositions were investigated by powder X-ray diffraction analysis, ³¹P nuclear magnetic resonance (NMR) spectroscopy and electrochemical lithium intercalation. The structure of all samples determined by Rietveld analysis is of the Nasicon type with the R space group. Mn²⁺/Ca²⁺ ions occupy only the M1 sites in the Ti₂(PO₄)₃ framework. The divalent cations are ordered in one of two M1 sites, except for the Mn_0.50Ti₂(PO₄)₃ phase, where a small departure from the ideal order is observed by XRD and ³¹P MAS NMR. The electrochemical behaviour of Mn_0.50Ti₂(PO₄)₃ and Mn_(0.5−x)Ca_xTi₂(PO₄)₃ phases was characterised in Li cells. Two Li ions can be inserted without altering the Ti₂(PO₄)₃ framework. In the 0≤y≤2 range, the OCV curves of Li//Li_yMn_0.50Ti₂(PO₄)₃ cells show two main potential plateaus at 2.90 and 2.50–2.30 V. Comparison between the OCV curves of Li//Li_(1+y)Ti₂(PO₄)₃ and Li//Li_yMn_0.50Ti₂(PO₄)₃ shows that the intercalation occurs first in the unoccupied M1 site of Mn_0.50Ti₂(PO₄)₃ at 2.90 V and then, for compositions y>0.50, at the M2 site (2.50–2.30 V voltage range). The effect of calcium substitution in Mn_0.50Ti₂(PO₄)₃ on the lithium intercalation is also discussed from a structural and kinetic viewpoint. In all systems, the lithium intercalation is associated with a redistribution of the divalent cation over all M1 sites. In the case of Mn_0.50Ti₂(PO₄)₃, the stability of Mn²⁺ either in an octahedral or tetrahedral environment facilitates cationic migration.     

Analysis of Spectral Reflectance Using Normalization Method from Endoscopic Spectroscopy System

Objective assessment of gastrointestinal mucosal color is extremely important in the endoscopic diagnosis of digestive tract disease. In this paper, we propose a method to clarify the spectral characteristics of gastric and colon cancer. A large number of spectral reflectance data of mucous membrane are measured by the endoscopic spectroscopy system (ESS) in the National Cancer Center Hospital East, Kashiwa, Japan and the Department of Internal Medicine, Self-Defense Force Center Hospital, Tokyo, Japan. We assume that early cancer appears primarily in the spectral data of short wavelength, because it is usually present in a superficial cell where short wavelength light is scattered more strongly than long wavelength light. To identify the features in the short wavelength components, the spectral reflectance was divided by the reflectance of a long wavelength. We investigated the possibility of distinguishing early cancer from normal spectral data through statistical analysis, employing the projection axis as the mean difference between them. Early cancer and normal spectral data were projected on the projection axis, and the Student’s T-test was applied to evaluate the mean of the distribution between these data.     

A high-pressure Raman and X-ray diffraction study of the perovskite SrCeO3

A high-pressure structural study of SrCeO₃ has been performed at room temperature by Raman spectroscopy and X-ray diffraction up to 32 and 45 GPa, respectively. A first-order reversible phase transition is observed at about 12 GPa in both techniques. A second weak structural change, taking place between 18 and 25 GPa, can be suspected from Raman data. The increase in the number of Raman bands and diffraction lines is an indication that the symmetry is lowered and the compound does not evolve towards the ideal cubic perovskite structure. A Rietveld analysis of X-ray data was performed for the low-pressure phase and the atomic positions and the cell lattice parameters variations are reported in this paper. The volume compressibility derived from Raman modes (5.6×10⁻¹² Pa⁻¹), involving mainly bond-stretching for each type of polyhedron, is found to be close to the one obtained from volume cell variations measured by X-ray diffraction (7.9×10⁻¹² Pa⁻¹).     

CH分子束的强度与CH_4/He混合配比的关系及CH(A~2Δ)振转温度的计算

为了获得CH分子束及其相关特性,以氦气为载气,利用直流脉冲放电技术产生了CH分子束。实验记录了放电时间相对于脉冲分子束不同延时CH光谱信号强度的变化,放电相对延时为460μs左右获得最大的信号强度。研究了在保持CH4/He总气压3 atm和放电电压-4 kV不变的条件下CH分子束强度与不同配比的关系,建立了理论模型,对实验数据进行了理论拟合,拟合曲线与实验结果符合较好,配比为1%(甲烷与氦的气压比为1∶99)左右能够维持较稳定的放电现象和较强的放电强度而获得较强的CH自由基束流。在这一配比下对CH(A2Δ-X2Π)(0,0)带发射光谱进行探测和分析,获得CH(A2Δ)转动温度和振动温度分别为2455 K和4575 K,并估计此时每个脉冲中大约包含1013~1014个CH自由基。     

数值孔径与数字剪切散斑干涉条纹亮度的关系

分析了数字剪切散斑干涉条纹图的形成理论，并获得了条纹亮度与摄象机数值孔径等参数的精确关系式，从理论分析和实验验证均得出在采用小的摄象机数值孔径和３ｍＷ Ｈｅ－Ｎｅ激光器的情况下，仍可获得比较满意的数字剪切散斑干涉条纹图，理论工作及其结论对于进行数字剪切散斑干涉实验的最佳参数选择具有指导作用。     

表面粗糙度测量的磁光位相调制和锁相干涉

提出了一种表面粗糙度测量的新方法，该方法采用了微分偏振干涉的原理，利用由法拉第磁光调制器所组成的调制系统对偏振干涉光路的位相进行调制，利用锁相干涉原理对位相进行探测，该方法可实现无参考面快速非接触测量，在普通实验条件下，也可保持良好的稳定恶性循环 ，实验装置即可给出表面的轮廓又可给出其它统计数据，其横向分辨率为１．２μｍ纵向为２ｎｍ。