Phospha-adamantanes as ligands for organopalladium chemistry: aminations of aryl halides

The use of Pd₂dba₃·CHCl₃ and 1,3,5,7-tetramethyl-2,4,8-trioxa-6-phenyl-6-phospha-adamantane has been shown to facilitate the effective amination of aryl halides with aromatic or aliphatic amines in high yields.     

一种新型可溶性高聚物负载手性配体的合成及其催化烯烃的不对称双羟化反应研究

在碱性条件下, 聚乙二醇单甲醚(HO\|OPEG\|OMe)与1,4-二氟蒽醌进行亲核单取代反应生成中间体F\|AQN-OPEG-OMe, 产率88%. F-AQN-OPEG-OMe与奎宁锂进行亲核取代反应, 以95.6%的产率得到新型手性配体QN\|AQN\|OPEG-Me. QN-QN\|OPEG-Me与OsO4原位配位生成的均相催化剂在4种烯烃的不对称双羟化反应中表现出较高的对映选择性(92%~99%e.e.)和化学产率(80%~94%). 催化活性和立体选择性与Sharpless手性配体(DHQ)2AQN相当. 反应结束后, 配体可用乙醚沉淀回收, 循环使用5次, 催化剂的催化活性和立体选择性无明显改变, 配体的回收率均在95%~97%之间.     

Note on the application of the reduced graph model in conjunction with search trees to the enumeration ofKekulé structures

The reduced graph model, when used in conjunction with the search trees method, provides a novel combinatorial procedure for the enumeration and generation ofKekulé structures. The procedure is suited for large benzenoid hydrocarbons consisting of cata- and thin peri-condensed parts.

---

Zur Anwendung des Reduced Graph Model im Zusammenhang mit Search Trees zur Ermittlung der Anzahl möglicherKekulé-Strukturen

Zusammenfassung Das Modell erlaubt mit der im Titel genannten Kombination eine neuartige Methode zur Ermittlung und Generierung vonKekulé-Strukturen. Das Verfahren ist für große benzoide Kohlenwasserstoffe geeignet, die aus cata- und (dünnen) peri-kondensierten Teilstrukturen bestehen.

     

Chelating Behaviour of Substituted 1-Benzoyl-4-Phenylthiosemicarbazide

The preparation and characterization of a series of new coordination compounds of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) containing o-methyl- or o-chlorobenzoyl-4-phenyl-3-thiosemicarbazide (HMBPT, HCBPT=HL) are reported. The reaction products were investigated by analyses, electrolytic conductance, magnetic susceptibility, reflectance and IR spectral studies. The IR spectra show that HMBPT and HCBPT coordinate with the metal ions via different coordination sites (NS and/or NO). The spectral data support the suggestion that the ligands form his-chelates with Ni(II) and Cu(II) of square planar stereochemistry and of general formulae ML₂·H₂O, where L is the uninegatively charged bidentate ligand. The Co(II) ion forms octahedral and tetrahedral structures with HMBPT and HCBPT, respectively. The ligand field parameters (D₄, B and β) for the Co(II) chelates were calculated using the averaged-ligand-field approximation. The influence of the benzene ring substituents (o-chloro or o-methyl) on the stereochemistry are discussed. Also, the formation of the complexes in solution was tested by the pH-metric method.     

Ligand-protein docking using a quantum stochastic tunneling optimization method

A novel hybrid optimization method called quantum stochastic tunneling has been recently introduced. Here, we report its implementation within a new docking program called EasyDock and a validation with the CCDC/Astex data set of ligand-protein complexes using the PLP score to represent the ligand-protein potential energy surface and ScreenScore to score the ligand-protein binding energies. When taking the top energy-ranked ligand binding mode pose, we were able to predict the correct crystallographic ligand binding mode in up to 75% of the cases. By using this novel optimization method run times for typical docking simulations are significantly shortened.     

四核钴羰基簇合物Co4(CO)8(μ-CO)2(μ4-PSR)2的合成和晶体结构

The title compounds Co4(CO)8(μ-CO)2 (μ4-PSR) [R=-CH3, -C2H5, -C(CH3)3,-(CHa)4CH3] were synthesized by the reaction of Co2(CO)8 with RSPCl2. They were characterized by IR, 1HNMR, elemental analysis. The crystal and molecular structure of Co4(Co)8(μ-CO)2 (μ4-PSC2H5) has been determined by single crystal diffraction method. Crystal data: monoclinic, space group P21 /c, with a=8-445(3), 6=8.562(3), c= 17.125(6)Å, β=104.26 (3)' 9 V=1200.1Å3, Z=2, Dc=1.937gcm-3. Its molecular structure contains an octahedral Co4P2 skeleton which consists of a rectangular four cobalt atoms core and the Co4 core is capped above and below by two quadruply bridging PSR ligands.     

d,h-m̈-Alkoxoalkylphosphonato-e-m̈-alkoxo-f-m̈-oxo-bis[trichloroantimon(V)]-Verbindungen

d,h-m?-Alkoxoalkylphosphonato-e-m?-alkoxo-f-m?-oxo-bis[trichloroantimony(V)] Compounds The binuclear antimony(V) complexes Cl₃Sb(O)[R³(R¹O)PO₂](OR²)SbCl₃ 1 to 7 with R¹, R² and R³ = Me or Et in solution slowly exchanges the R² groups between the equatorial oxygen atoms of the Sb₂O₂ ring. The SbO(3)PO(3)Sb ringsystem makes rapid pseudorotation. The resulting isomeres are detected by nmr spectroscopy.     

Copolymerization of butadiene and styrene with a gadolinium tricarboxylate catalyst

Homo- and copolymerizations of butadiene (BD) and styrene (St) were carried out by gadolinium catalysts having various tricarboxylate ligands [Gd(OCOR)₃: R = CH₃, CH₂Cl, CHCl₂, CCl₃, and CF₃], to investigate the effects of ligands and discuss the cis polymerization mechanism. Polymerization of BD with Gd(OCOR)₃—(i—Bu)₃Al—Et₂AlCl catalysts was carried out in hexane at 50°C. By each catalyst, poly(BD) having a high cis content (cis = 97–99%) in 22–85% yields for 2–24 h were obtained. The ligands with low pKa values increased the polymerization activity as follows: R of Gd(OCOR)₃: CF₃ > CCl₃ > CHCl₂ > CH₂Cl ～ CH₃. On the other hand, in the polymerization of St or copolymerization of BD and St under similar conditions, the highest activity was attained by a Gd(OCOCCI₃)₃- based catalyst. The difference in the optimum ligand among the homo- and copolymerization of BD and St was discussed on the basis of energy levels of the catalysts. In the copolymers of BD and St, the cis-1,4 content of the BD unit decreased with increasing St content. Furthermore, according to the diad analysis of copolymers (St content ～ 14.5 mol %) by ¹³C NMR spectroscopy, the low cis value of the BD unit was observed in the St-BD diad (cis/trans/vinyl = 24/53/23), while the high cis value of the BD unit remained in the BD-BD diad (cis/trans/vinyl = 89/10/1). These results suggest that the terminal BD unit is controlled by the cis configuration by the coordination between the penultimate cis vinylene unit and the gadolinium metal catalyst, whereas the presence of the penultimate St unit interferes with cis polymerization of the terminal BD unit. The difference in the coordination mechanism in the course of polymerization between rare earth metal and transition metal catalysts such as the Ni(acac)₂ and Co(acac)₃-based catalyst was also discussed. © 1995 John Wiley & Sons, Inc.     

Synthesis and structural characterization of ferrocene-based bis(pyrazol-1-yl)borate ligands: FcB(Me)pz2K, Fc2Bpz2K, and 1,1′-fc[B(Me)pz2]2K2 (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl)

Reaction of the ferrocenyl(dimethylamino)boranes FcB(Me)NMe₂, Fc₂BNMe₂, and 1,1′-fc[B(Me)NMe₂]₂ with 1:1 mixtures of pyrazole and potassium pyrazolide in refluxing THF gave the potassium salts of the ferrocene-based bis(pyrazol-1-yl)borate ligands FcB(Me)pz₂K, Fc₂Bpz₂K, and 1,1′-fc[B(Me)pz₂]₂K₂ in good yield (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl). In the solid state, FcB(Me)pz₂K and Fc₂Bpz₂K form centrosymmetric dimers with short K?Cp contacts suggesting an η⁵ coordination mode of the potassium ion. The crystal lattice of the ditopic ligand 1,1′-fc[B(Me)pz₂]₂K₂ consists of coordination polymer strands featuring essentially the same structural motif that has been observed for the monotopic derivatives. All three scorpionate ligands are thus promising building blocks for the preparation of ferrocene-containing multiple-decker sandwich complexes.     

Surface diffusion in reversed-phase liquid chromatography using silica gels bonded with C1 and C18 ligands of different densities

Surface diffusion in reversed-phase liquid chromatography (RPLC) using silica gels bonded with C₁ and C₁₈ alkyl ligands of different densities was studied from the viewpoints of two extrathermodynamic relationships, i.e., enthalpy-entropy compensation (EEC) and linear free energy relationship (LFER). First, according to the four methods proposed by Krug et al., the values of surface diffusion coefficient (D_s) were analyzed to confirm that an actual EEC resulting from substantial physico-chemical effects takes place for surface diffusion. Then, it was also demonstrated that a LFER is observed between surface diffusion and the retention equilibrium. The establishment of EEC and LFER suggests a mechanistic similarity of molecular migration by surface diffusion, irrespective of the alkyl chain length and the densities of C₁ and C₁₈ ligands. Finally, a thermodynamic model for the LFER based on the real EEC was used to estimate D_s values under various RPLC conditions. The D_s values can be estimated with a mean square deviation of about 25–30%. The agreement between the D_s values estimated and those experimentally measured suggests that the total mass flux by surface diffusion consists of the two contributions due to C₁ and C₁₈ ligands and that the contribution of each ligand is proportional to the ligand density.