Analysis of critical points on the potential energy surface

A simple classification scheme is proposed for critical points, based only on rankr and signatures of the (n,n)-matrixG of harmonic force constants. The determination ofr ands, e.g. by the well-known factorizationG=L ^T gL (L: triangular matrix,g: diagonal matrix), has several theoretical as well as practical (computational) advantages over the inspection of eigenvalues ofG, so far used in quantum chemistry. The eigenvalues are sufficient butnot necessary for a classification whereas rank and signature are the only necessary and sufficient prerequisites for solving the task. For the purpose of presenting a working example, by calculating only a 2×2 torque constant matrix, it is shown that the coplanar ethylbenzene is unstable in the CNDO/2 picture.     

Synthesis and characterization of organometallic conjugated polymers containing tricarbonyl(arene)chromium unit and platinum

Novel organometallic conjugated polymer containing (η⁶-arene)Cr(CO)₃ and platinum in the main chain was synthesized by dehydrohalogenation coupling reaction of (η⁶-1,4-diethynylbenzene)tricarbonylchromium with trans-(PBu₃)₂PtCl₂. The polymer was soluble in common organic solvents and has the number-average molecular weight of 31,000 by GPC analysis. The polymer exhibited an absorption peak derived from π-π^∗ interaction at 358 nm in the UV-Vis spectrum, which showed a red shift of approximately 90 nm compared to that of the model compound. The photochemical ligand exchange reaction of the polymer was also investigated.     

Redox polymerization of methyl methacrylate with allyl alcohol 1,2-butoxylate-block-ethoxylate initiated by Ce(IV)/HNO3 redox system

Redox initiated free-radical polymerization of methyl methacrylate (MMA) with allyl alcohol 1,2-butoxylate-block-ethoxylate (AABE) was carried out using cerium(IV) ammonium nitrate/nitric acid (HNO₃) redox system to yield AABE-b-PMMA copolymers. The effects of MMA, AABE, Ce(IV) and HNO₃ concentrations on the polymerization rate and polymer yield were investigated. The effect of temperature on the rate of polymerization and polymer yield was also investigated in the temperature range of 25-70 °C. Copolymers were characterized using GPC, FT-IR, ¹H NMR and viscometry methods.     

Oxidative Transformations of Organic Compounds Mediated by Redox Molecular Sieves

Zeolites are viewed by some as the “philosopher's stone” of modern chemistry.^[1] They are more or less indispensable in oil refining and petrochemicals manufacture where they are widely applied as solid acid catalysts. More recently attention has been focused on their use in the manufacture of fine chemicals. The synthetic utility of zeolites and related molecular sieves (zeotypes) has been considerably extended by the incorporation of redox metals into their frameworks. The resulting redox molecular sieves catalyze a variety of selective oxidations under mild conditions in the liquid phase. Their structural diversity–including variation of the redox metal, incorporation of metal complexes, and the size and polarity of the micropores–provides the possibility of designing tailor-made solid catalysts (“mineral enzymes”) for liquid-phase oxidations with clean oxidants such as O₂, H₂O₂, and RO₂H. Hence, they have enormous potential in industrial organic synthesis as environmentally friendly alternatives to traditional oxidations employing inorganic oxidants in stoichiometric amounts. A primary aim of this review is to familiarize organic chemists with the synthetic potential of redox molecular sieves. An outline of their synthesis, structures, and chemical properties, highlighting their unique advantages, is followed by a discussion of general (mechanistic) features that influence the choice of a suitable catalyst for a particular type of oxidation. The main part of the review deals with the oxidation of various substrates of synthetic interest–such as alkanes, alkenes, (alkyl)arenes, alcohols, and amines–and emphasizes the advantages of redox molecular sieves (including selectivity and stability) over their homogeneous counterparts. New directions towards truly biomimetic solid catalysts, for example zeolite-encapsulated chiral metal complexes as heterogeneous catalysts for asymmetric oxidations, are high-lighted.     

Redox-iodometry: a new potentiometric method

A new iodometric method for quantifying aqueous solutions of iodide-oxidizing and iodine-reducing substances, as well as plain iodine/iodide solutions, is presented. It is based on the redox potential of said solutions after reaction with iodide (or iodine) of known initial concentration. Calibration of the system and calculations of unknown concentrations was performed on the basis of developed algorithms and simple GWBASIC-programs. The method is distinguished by a short analysis time (2–3 min) and a simple instrumentation consisting of pH/mV meter, platinum and reference electrodes. In general the feasible concentration range encompasses 0.1 to 10^–6 mol/L, although it goes down to 10^–8 mol/L (0.001 mg Cl₂/L) for oxidants like active chlorine compounds. The calculated imprecision and inaccuracy of the method were found to be 0.4–0.9% and 0.3–0.8%, respectively, resulting in a total error of 0.5–1.2%. Based on the experiments, average imprecisions of 1.0–1.5% at c(Ox)>10^–5 M, 1.5–3% at 10^–5 to 10^–7 M, and 4–7% at <10^–7 M were found. Redox-iodometry is a simple, precise, and time-saving substitute for the more laborious and expensive iodometric titration method, which, like other well-established colorimetric procedures, is clearly outbalanced at low concentrations; this underlines the practical importance of redox-iodometry.

---

An erratum to this article is available at .     

过硫酸胺与N－［（3－二甲氨基）丙基］丙烯酰胺氧化还原引发体系的研究

过硫酸胺与Ｎ－［（３－二甲氨基）丙基］丙烯酰胺氧化还原引发体系的研究司堃，郭新秋，丘坤元（北京大学化学与分子工程学院北京１００８７１）关键词Ｎ－取代丙烯酰胺，氧化还原体系，反应动力学，端基分析，反应机理Ｎ－［（３一二甲氨基）两基］丙烯酸胺（ＤＭＡＰＡ...     

A rigid inclusion in an elastic space under the action of a uniform heat flow in the inclusion plane

A solution is presented for the three dimensional static thermoelastic problem of an absolutely rigid inclusion (anticrack) in the case when a uniform heat flow is directed along the inclusion plane. By using the potential method and the Fourier transform technique, the problem is reduced to a system of coupled two-dimensional singular integral equations for the shear stress jumps across the inclusion. As an illustration, a typical application to the circular anticrack is presented. Explicit expressions for the thermal stresses in the inclusion plane are obtained and discussed from the point of view of material failure.     

POLYMERIZATION OF ACRYLAMIDE IN AQUEOUS MEDIUM INITIATED BY REDOX SYSTEM OF 4-CARBOXYBENZOPHENONE AND SULFUR-CONTAINING COMPOUNDS

A series of sulfur-containing compounds was investigated as electron donors in photoinduced free-radical polymerization, in conjunction with 4-carboxybenzophenone (CB) as sensitizer. These compounds included (phenylthio) acetic acid, ethionine, methionine, Gly-Met, Met-Gly and methionine methyl ester. The results were compared with the nonsulfur-containing compounds, alanine and triethanolamine. The best initiation yields is observed for the system CB-(phenylthio)acetic acid.     

Electrochemical Characteristics of a Triphenylamine Derivative by Microelectrode Voltammetry

With the objective of understanding the kinetic redox properties of triphenylamine derivatives in association with chemical reactions, for their future application in functional organic semiconductor devices, the electrochemical characteristics of 4‐(2,2‐diphenylethenyl)‐N,N‐bis(4‐methylphenyl)‐benzenamine (TPA) were evaluated. Based on cyclic voltammograms of TPA on Pt disk electrodes with diameters of 300 μm and 10 μm at slow and fast scan rates in an acetonitrile solution, the TPA^.+ is stable, while the TPA²⁺ is unstable. Importantly, the unstable TPA²⁺ appears to break down by a subsequent chemical reaction. A Cottrell plot analysis from chronoamperometry of a solution containing TPA reveals that both the first and second oxidations are one‐electron reactions. Concerning the stabilization mechanism of the first oxidation state of TPA, the results of molecular orbital calculations indicate that the electrons of the HOMO level are distributed in the triphenylamine group, which induces a resonance‐stabilized TPA^.+. Based on these results, TPA/TPA^.+ is suggested to have a sufficient stability for further application in organic semiconductor devices.     

Characterization of a Novel Dioxomolybdenum Complex by Cyclic Voltammetry

Metalloenzymes that carry a pterin-based molybdenum cofactor in their center catalyze numerous reactions in the human body and play a crucial role in its metabolism. Specifically, these enzymes promote redox reactions and oxygen transport in the body. Their absence may cause many problems leading to disability or even death in early childhood. Therefore, model compounds need to be synthesized and analyzed to investigate the reactivity, redox potential, and geometry of these cofactors. This study focused on electrode processes and determined the redox potentials of the new bis-(4-mercapto-5-(p-tolyl)-3H-1,2-dithiole-3-thione)-dioxomolybdenum complex by cyclic voltammetry. The 4-mercapto-5-(p-tolyl)-3H-1,2-dithiole-3-thione ligand underwent irreversible oxidation and reduction at thiol and thione functional groups. The new dioxomolybdenum complex showed a quasi-reversible two-stage electrode process.