电子照相技术成像模拟研究

针对高能电子照相的关键物理过程开展蒙特卡罗照相模拟研究,采用Geant4围绕2.5 GeV电子在四极透镜组内的输运、电子与物质相互作用衰减等照相基本过程展开研究。通过设计不同材料、不同厚度的含缺陷平板作为模拟照相客体,开展放大型电子照相系统缺陷分辨能力模拟。此外,采用不同材料、不同厚度的台阶样品,模拟获得了电子束流穿过相应面密度材料后的线扩展函数,进一步评估电子照相对实心客体的探测分辨能力。     

A new test on the conditional capital asset pricing model

Testing the validity of the conditional capital asset pricing model(CAPM) is a puzzle in the finance literatureLewellen and Nagel[14]find that the variation in betas and in the equity premium would have to be implausibly large to explain important asset-pricing anomaliesUnfortunately, they do not provide a rigorous test statisticBased on a simulation study, the method proposed in Lewellen and Nagel[14]tends to reject the null too frequently.We develop a new test procedure and derive its limiting distribution under the null hypothesis.Also, we provide a Bootstrap approach to the testing procedure to gain a good finite sample performanceBoth simulations and empirical studies show that our test is necessary for making correct inferences with the conditional CAPM.     

Cauchy-type integral formula and Plemelj formula of hypermonogenic functions on unbounded domains

In this paper, we discuss the Cauchy-type integral formula of hypermonogenic functions on unbounded domains in real Clifford analysis, then we extend the Plemelj formula and Cauchy–Pompeiu formula of hypermonogenic functions on bounded domains to unbounded domains. We also deal with the Green-type formula on unbounded domains and get several important corollaries.     

原子荧光光谱法测定化探样品中的砷和锑

对氢化物原子荧光光谱法测定化探样品中砷和锑元素的分析条件,尤其是浸提法及预还原顺序进行了考察。样品经王水和王水溶液(1+1)分别浸提后以不同顺序预还原,结果表明,王水的氧化性会降低硫脲–抗坏血酸的还原效果,预还原时降低王水浓度能提高测定结果的准确度。在优化的测定条件下,样品中砷、锑测定结果的相对标准偏差分别为0.6%,2.7%;回收率分别为95%～101%,91%～106%;检出限分别为0.020,0.026 ng/mL。改善样品处理方法后测定结果的的准确度得到提高。     

Coffee-ring effects in laser desorption/ionization mass spectrometry

This report focuses on the heterogeneous distribution of small molecules (e.g. metabolites) within dry deposits of suspensions and solutions of inorganic and organic compounds with implications for chemical analysis of small molecules by laser desorption/ionization (LDI) mass spectrometry (MS). Taking advantage of the imaging capabilities of a modern mass spectrometer, we have investigated the occurrence of “coffee rings” in matrix-assisted laser desorption/ionization (MALDI) and surface-assisted laser desorption/ionization (SALDI) sample spots. It is seen that the “coffee-ring effect” in MALDI/SALDI samples can be both beneficial and disadvantageous. For example, formation of the coffee rings gives rise to heterogeneous distribution of analytes and matrices, thus compromising analytical performance and reproducibility of the mass spectrometric analysis. On the other hand, the coffee-ring effect can also be advantageous because it enables partial separation of analytes from some of the interfering molecules present in the sample. We report a “hidden coffee-ring effect” where under certain conditions the sample/matrix deposit appears relatively homogeneous when inspected by optical microscopy. Even in such cases, hidden coffee rings can still be found by implementing the MALDI-MS imaging technique. We have also found that to some extent, the coffee-ring effect can be suppressed during SALDI sample preparation.     

Hyphenation of optimized microfluidic sample preparation with nano liquid chromatography for faster and greener alkaloid analysis

A glass liquid–liquid extraction (LLE) microchip with three parallel 3.5 cm long and 100 μm wide interconnecting channels was optimized in terms of more environmentally friendly (greener) solvents and extraction efficiency. In addition, the optimized chip was successfully hyphenated with nano-liquid chromatography with ultraviolet and mass spectrometric detection (nanoLC–UV–MS) for on-line analysis. In this system, sample pretreatment, separation and detection are integrated, which significantly shortens the analysis time, saves labor and drastically reduces solvent consumption. Strychnine was used as model analyte to determine the extraction efficiency of the optimized 3-phase chip. Influence of organic solvent, pH of feed phase, type of alkaloid, and flow rates were investigated. The results demonstrated that the 3-phase chip nanoLC–UV/MS hyphenation combines rapid (∼25 s) and efficient (extraction efficiency >90%) sample prep, with automated alkaloid analyses. The method was applied to real samples including Strychnos nux-vomica seeds, Cephaelis ipecacuanha roots, Atropa belladonna leaves, and Vinca minor leaves.     

Reflection–absorption infrared sensing device for detection of semivolatile aromatic compounds in soils

In this article, a new IR-sensing device is described for the examination of chlorinated aromatic compounds in soils. To prepare this sensing device, a 20-mL glass vial was modified for use in the analysis of soil samples by conventional Fourier-transform infrared (FT-IR) spectroscopy. In this sampling device, an aluminium plate coated with a hydrophobic film was placed on top of the cap of the sample vial to absorb the analytes that evaporated from the soil matrix. After this absorption process was complete, the cap was placed in an FT-IR spectrometer, and the absorbed analytes were detected in the reflection–absorption (RA) mode. To accelerate the rate of evaporation of the analytes, the soil samples were heated to various temperatures. Meanwhile, other factors, such as the moisture content, sampling time, thickness of the hydrophobic film, and the volatilities and concentrations of the analytes, were also examined to optimize the analytical conditions. The results indicated that the time required to reach equilibrium conditions was short, and evaporation/absorption could be achieved within 10?min. With a water content of 10% (v/w) or less, the intensities of the analytical signals were increased greatly when compared with those of dry samples; when the water content was above 10% (v/w), these intensities decreased, partially as a result of the heating efficiency. After examining the compounds that had different vapour pressures, the analytical results indicated that this method was applicable to the examination of compounds that had vapour pressures below 1.0?Torr. Using the optimal conditions determined in this study, the detection limits for semivolatile aromatic compounds were lower than 100?ng/g, and the regression coefficients of the standard curves for compounds that had a vapour pressure lower than 1.0?Torr were larger than 0.99 in the concentration range of 1–100?µg/g.     

Simple Device for Isolation of Organic Compounds from Water

Abstract

A simple device for isolation of organic compounds from aqueous samples has been designed and its operating parameters tested during bioth periodic and continuous operation using isolation of organochlorine compounds as an example.

A stream of an aqueous sample is pumped at elevated temperature by a piston pump to an unit for expransion of the liquid phase surface, where the liquid is sprayed on the walls of the unit and flows down freely.

Organochlorine compounds passing to the gaseous phase are purged with a stream of purified air, oxidied and the chlorides formed are determined coulometrically. The designed device, due to its simplicity, can be built and employed in each averagely equipped laboratory.     

Field Desorption Mass Spectrometry of Standard Organophosphorus Pesticides and Their Identification in Waste Water

The characteristic behaviour of four groups of commonly used organophosphorus pesticides such as phosphates, phosphorothionates, phosphorothiolates and phosphorodithioates has been investigated by field desorption mass spectrometry. Their spectra show molecular ions of high abundance and characteristic fragmentation patterns. The phosphates and phosphorothionates usually show the α-cleavage with respect to the P-atom with and without proton transfer. In contrast, the phosphorothiolates and phosphorodithioates usually show the β-cleavage from the P-atom. The fragments with the charge retention on the phosphorus moiety were also observed in the field desorption mass spectra, although their abundances were often relatively low.

The analyses of standard mixtures as well as some waste water samples indicate that field desorption mass spectrometry is suitable for the identification of organophosphorus pesticides at nanogram level in mixtures and environmental samples without preliminary separation and purification.     

Ammonium Determination in Water Samples by Using Opa-Nac Reagent: A Comparative Study with Nessler and Ammonium Selective Electrode Methods

A selective and sensitive method based on the ammonium derivatisation with o -phthaldialdehyde (OPA) and N -acetyl-cysteine (NAC) has been developed for ammonium determination in real water samples. The proposed procedure has been compared with ammonium reference methods such as Nessler reagent method and ammonium selective electrode. All procedures have been chemometrically tested and compared in terms of the main analytical properties. These procedures have been used to determine ammonium in unknown water samples. The OPA-NAC reagent method does not present any systematic error (proportional or constant), while Nessler reagent presents both of them for some samples assayed. The ammonium selective electrode is free of corrigible systematic errors, however presents amine interference. The OPA-NAC ammonium method is able to achieve a detection limit (LOD) of 0.07 mg/L in the sample, with a linear dynamic range up to 1.4 mg/L of ammonium.