Magnetic properties of carbon nanosheets

Two-dimensional carbon nanosheets have been fabricated using inductively coupled radio frequency plasma-enhanced chemical vapour deposition. The structural properties of the nanosheets have been characterised using atomic force microscopy, scanning electron microscopy and X-ray diffractometer. The magnetisation of the samples was studied using vibrating sample magnetometer. The magnetisation of the nanosheets was found to be diamagnetic for fast synthesis processes (30 and 60 min). On the other hand, the nanosheets exhibited a weak ferromagnetic response for the slow (120 min) synthesis process. Energy dispersive spectrometry and atomic absorption spectroscopy confirmed that the magnetisation exhibited by the carbon nanosheets was an intrinsic property and that it was not due to contamination from the substrate. Raman spectroscopy studies revealed that the ferromagnetic carbon nanosheets have a higher ratio (1.20) of graphite peak (I _G) to disordered peak (I _D) than normally expected (0.75–0.90). Available data indicated that the magnetisation was due to the presence of structural disorders.     

Sample Preparation for the Determination of Metals in Food Samples Using Spectroanalytical Methods—A Review

Abstract

The present article gives an overview of recent publications and modern techniques of sample preparation for food analysis employing atomic and inorganic mass spectrometric techniques, such as flame atomic absorption spectrometry, chemical vapor generation atomic absorption and atomic fluorescence spectrometry, graphite furnace atomic absorption spectrometry, inductively coupled plasma optical emission spectrometry, and inductively coupled plasma mass spectrometry. Among the most frequently applied sample preparation techniques for food analysis are dry ashing, usually with the addition of an ashing aid, and acid digestion, preferably with the assistance of microwave energy. Slurry preparation, particularly with the assistance of ultrasound, is increasingly used to reduce acid consumption and sample preparation time. Direct analysis of solid samples is gaining importance in the field of food analysis as it offers the highest sensitivity, avoids the use of acids and other aggressive reagents, makes possible the analysis of micro‐samples, and can be applied for fast screening analysis, e.g., of fresh meat.     

Rate conservation laws: A survey

We survey the rate conservation law, RCL for short, arising in queues and related stochastic models. RCL was recognized as one of the fundamental principles to get relationships between time and embedded averages such as the extended Little's formulaH=G, but we show that it has other applications. For example, RCL is one of the important techniques for deriving equilibrium equations for stochastic processes. It is shown that the various techniques, including Mecke's formula for a stationary random measure, can be formulated as RCL. For this purpose, we start with a new definition of the rate with respect to a random measure, and generalize RCL by using it. We further introduce the notion of quasi-expectation, which is a certain extension of the ordinary expectation, and derive RCL applicable to the sample average results. It means that the sample average formulas such asH=G can be obtained as the stationary RCL in the quasi-expectation framework. We also survey several extensions of RCL and discuss examples. Throughout the paper, we would like to emphasize how results can be easily obtained by using a simple principle, RCL.     

事后分层方法及其在交通运输抽样调查中的应用

本文介绍事后分层技术，说明了它不仅可用于简单随机抽样，而且可以用于放回ＰＰＳ抽样。给出了事后分层估计量的形式，证明了它的无编性，并给出了它在交通运输抽样调查中的应用。     

高盐样品中锂的电感耦合等离子体发射光谱法(ICP-OES)测定研究

锂是重要的战略金属和新能源材料,其开发利用受到全球的高度关注。在高盐卤水特别是盐湖卤水和地下卤水中富含巨量的锂资源,在对这些资源进行锂的开发利用过程中,需对锂的含量进行准确测定,然而卤水中共存的高浓度Na+, K+, Ca2+和Mg2+会对微量锂的准确测定产生严重的干扰。电感耦合等离子体发射光谱法(ICP-OES)具有线性范围宽和多元素同步分析能力,针对卤水中锂的快速准确测定,详细开展了高盐样品中锂的ICP-OES分析方法研究。结果表明,锂在610.364 nm处具有较高的信噪比,且Na+, K+, Ca2+, Mg2+和Ar不会对锂的测定产生显著的谱线干扰。然而,样品中大量共存的Na+, K+和Mg2+会对锂的测定产生严重的基体正干扰,而Ca2+产生负干扰。尽管内标法在消除基体干扰方面具有广泛的应用,但传统的以钇和钪为内标元素的内标法不能有效解决该问题。此外,针对标准加入法操作繁琐、不适合批量样品分析问题,以及基体匹配法需多离子匹配,且不适合样品基体组成变化的批量样品分析等问题,考察了采用单一组分进行复杂基体匹配的可行性。由于NaCl广泛存在于卤水中,且对锂的测定具有显著的增敏效应,通过系列研究发现,通过同时向样品和标准溶液中加入10 g·L-1的NaCl,成功解决了总量不超过40 g·L-1的NaCl, KCl和MgCl2所产生的干扰。尽管采用该法或沉淀预分离方式均不能消除Ca2+产生的负干扰,但当样品中Ca2+含量不高于1.8 g·L-1时,对测定不产生显著的影响。通过采用该方法对三种不同基体组成的卤水样品进行加标回收测定,其回收率在96.60%~104.20%范围内。此外,通过与电感耦合等离子体质谱法(ICP-MS)测定结果进行对比,充分论证了该法的准确性和可靠性(相对误差±3.66%)。该法仅以单一的NaCl进行复杂基体匹配,不仅简化了操作,还实现了基体组成变化的批量样品分析,因而在卤水中锂的快速准确测定及锂资源开发利用方面具有重要意义。     

Comparing ordered-entry queues with heterogeneous servers

We study a queueing system withm exponential servers with distinct service rates. Jobs arrive at the system following an arbitrary point process. Arrived jobs receive service at the first unoccupied server (if any) according to an entry order , which is a permutation of the integers 1, 2,...,m. The system has a finite buffer capacity. When the buffer limit is reached, arrivals will be blocked. Blocked jobs will either be lost or come back as New arrivals after a random travel time. We are concerned with the dynamic stochastic behavior of the system under different entry orders. A partial ordering is established among entry orders, and is shown to result in some quite strong orderings among the associated stochastic processes that reflect the congestion and the service characteristics of the system. The results developed here complement existing comparison results for queues with homogeneous servers, and can be applied to aid the design of conveyor and communication systems.     

检测输油管道实际油垢样品的实验研究

在石蜡实验基础上,本工作运用γ射线散射法检测油垢样品进行对比实验研究,并在进一步的实验研究中探讨康普顿散射光子数与油垢样品厚度之间的线性关系．发现放射源与油垢样品之间的距离与提高线性度有很大关系．本实验测得最佳线性相关系数平方值为0．9871,测量精度为0．671mm．     

基于邻域贡献权值细化的圆心亚像素定位算法

针对传统的圆心算法过程复杂、定位精度受初始边缘提取效果影响较大等问题,提出了一种基于邻域贡献权值细化的圆心亚像素定位算法。首先引入邻域贡献权值系数,改进传统非极大值抑制法,细化边缘;然后在边缘点的梯度方向对灰度值进行高斯拟合,确定亚像素边缘位置;最后针对边缘突变点提出了基于随机抽样一致的最小二乘法来拟合圆心。实验结果表明,该算法具有较好的精度和稳定性,圆心的提取精度可以达到0.1个像素。     

A characterization of the logistic distribution by a sample median

Summary A functional form of the characteristic function of the sample median of three variates is shown to characterize the logistic distribution. A consequence of this is a characterization of the logistic in terms of the Laplace distribution. Research sponsored in part by the Air Force Office of Scientific Research, Air Force Systems Command, USAF under Grant No. AFOSR-77-3360. The United States Govenment is authorized to reproduce and distribute reprints for governmental purposes notwith-standing any copyright notation hereon.     

高温超导电缆导体层电流分布研究

通过建立高温超导电缆等效电路模型,并提出电流分布等效数学方程,求得高温超导电缆导体层电流分布。绕制一根0.2m长110kV/2kA高温超导电缆样缆,并进行载流能力实验,得到各层电流分布结果。分析发现,各层电流分布的实验结果与理论计算结果吻合,从而验证电流分布计算模型的正确性,以及调整绕制角度对均匀层间分流的有效性。研究结论对以后更长高温超导电缆的载流能力分析具有一定的指导意义。