二醚型 Ziegler-Natta 催化剂催化丙烯与极性单体共聚

 以三乙基铝 (TEA) 为保护剂, 研究了 TiCl4/MgCl2/芴二醚/Al(C2H5)3 体系催化丙烯与十一烯醇或十一烯酸的共聚反应. 结果表明, 在极性单体存在下, 聚合反应活性随极性单体加入量的增加而降低, 但可保持丙烯均聚活性的一半以上, 反应活性衰减较小. 同时, 随着极性单体加入量的增加, 极性单体在共聚物中的含量增加. 与十一烯酸相比, 十一烯醇共聚具有更高的共聚活性和共单体含量. 随着共聚物中极性单体含量的增加, 聚合物的熔点和结晶温度都有所降低. 反应温度对丙烯和十一烯醇共聚的反应活性和共单体含量影响较小.     

多官能团单体对马来酸酐接枝聚丙烯流变行为的影响

研究了多官能团辅助单体偏苯三酸三丙烯酯(TATM)对马来酸酐接枝聚丙烯的熔体流动速率(MFR)和流变行为的影响.当以不含抗氧剂的聚丙烯粉料为原料时,TATM的加入对稳定接枝产物MFR的效果并不理想.但将聚丙烯粉料添加抗氧剂并造粒后,TATM的加入则可有效稳定体系的MFR,各种流变曲线显示出接枝产物的熔体弹性明显提高,说明有枝化或交联结构出现.针对PP粉料和粒料间接枝产物流变行为存在的重大差异,结合熔体自由基接枝反应的机理进行了解释.TATM能够起到稳定MFR的效果是由于其提高了接枝物的熔体弹性,从而抵消了聚丙烯熔体接枝反应中所不可避免的β断链所造成的剪切黏度下降.聚丙烯粉料和粒料中抗氧剂的差异对聚丙烯的加工降解有严重影响,造成了TATM在不同聚丙烯体系中效果的差异.     

A novel associative latex thickener using ethoxylated behenyl methacrylate as functional monomer

<正>Alkali-soluble associative latex thickeners modified with hydrophobic long chain alkyl groups were prepared using common acrylics and varying amount of a functional monomer,ethoxylated behenyl methacrylate(BEM),through emulsion polymerization.It was found that the size of the emulsion particle became larger with addition of BEM.The light transmittance of the thickener latex sharply increased with pH varied from 6 to 7.The associative latex thickener manifested a higher viscosity when solids in the latex thickeners were kept at 0.5 wt%or higher,and the optimal amount of BEM was found to be around 2.5 wt%,or 0.16 mol%.All thickener latexes modified with BEM have better shearing resistance than the BEM-free thickener.     

Experimental measurements of vapor–liquid equilibria at low pressure: Systems containing alcohols,esters and organic acids

In this work the vapor–liquid equilibria for nine binary mixtures (methanol + acetic acid, methanol + methyl acetate, methanol + water, methyl acetate + acetic acid, water + acetic acid, ethyl acetate + acetic acid, ethanol + acetic acid, ethanol + ethyl acetate and ethanol + water) at subatmospherical pressure (580 mmHg) is presented. Peng–Robinson Stryjek–Vera equation of state coupled with the Wong–Sandler mixing rules were used for predicting phase equilibria of these mixtures. The measurements were developed using an apparatus with recirculation that can also be employed for liquid–vapor equilibrium with chemical reaction.     

Anionic polymerization of biomass‐derived furfuryl methacrylate: Controlling polymer tacticity and thermoreversibility

Biomass‐derived furfuryl methacrylate (FMA) has been successfully polymerized for the first time by anionic polymerization to produce atactic (at‐), isotactic (it‐), or syndiotactic (st‐) poly(furfuryl methacrylate) (PFMA), depending on initiator structure and reaction conditions. Thermal properties of the PFMA materials are strongly affected by the polymer tacticity. Most notably, while both isotactic and syndiotactic polymers can undergo inter‐ or intrachain crosslinking reactions when heated to 290 °C, there is no evidence for the atactic polymer to perform the same reaction. Furthermore, the PFMA tacticity also greatly affects the amount of stable carbonaceous materials it produces when heated to 650 °C, with st‐PFMA forming the largest amount of such materials (26.9%), as compared to only 5.6% by at‐PFMA. Using the Diels–Alder (DA) “click reaction” between the reactive furfuryl group within the PFMA polymers as the diene equivalent and a bismaleimide as the dienophile, thermoreversible smart polymers have been successfully prepared. Thermoreversibility of the preformed crosslinked polymers has been demonstrated, thanks to the facile retro‐DA reaction upon heating and the DA reaction upon cooling of such self‐healing materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2793–2803     

Effect of cationic monomer on properties of fluorinated acrylate latex

Cationic fluorinated acrylate latex was prepared via semi-continuous emulsion copolymerization of cationic monomer and other monomers.The resultant latex and its film were characterized with dynamic light scattering detector and contact anglc meter. Influences of amount of DMDAAC on the propcrtics of resultant latex and its film were investigated in detail.Results show that the particle size of the latex has the minimum value and the zeta potential of the latex is increased when the amount of DMDAAC is increased.In addition,the particle size of the latex is unimodal distribution when the amount of DMDAAC is not more than 2.5%. However,the particle size of the latex is bimodal distribution when the amount of DMDAAC is more than 2.5%.The contact angle is varied slightly with the increase of amount of DMDAAC when it is not more than 2.5%.Nevertheless,the contact angle is decreased with the increase of the amount of DMDAAC when it is more than 2.5%.     

A direct route to polythiophenes displaying lateral substituents: Easy one‐step synthesis and polymerization of thiophene monomers substituted by a dimethylenecarboxylate (CH2CH2COOR) appendage on the 3‐position

Thiophene monomers displaying a dimethylenecarboxylate (CH₂CH₂COOR) substituent on the 3‐position of the aromatic ring can be easily obtained and in one step from the electrochemically induced reaction of 3‐bromothiophene with the corresponding acrylate (CH₂?CHCOOR). The synthesis of the ethyl ester monomer, of related 2,5‐dihalogenothiophenes, and their polymerization are reported. Despite the surprisingly low solubilities displayed by the polymers, a full spectroscopic characterization could be performed and the data fully analyzed. Oxidative polymerizations (FeCl₃ or electropolymerization) yield a regioirregular polythiophene, with 60–70% of head‐to‐tail diads. Both experimental and theoretical results suggest that the nonconjugated ester plays a very minor role—if any—in the polymerizations under oxidative conditions, but has a significant influence on the polymer properties. Preliminary attempts to polymerize the dihalogenothiophenes under reductive conditions were hampered by the even lower solubilities exhibited by the regioregular oligomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Poly(α‐methyleneglutarimide)s from radical polymerization of α‐methyleneglutarimides

α‐Methyleneglutaric acid, a metabolite of niacin (nicotinic acid), can be easily converted to its cyclic anhydride. We report here the first conversion of α‐methyleneglutaric anhydride to (a series of) α‐methyleneglutarimides. These monomers can be radically polymerized to the title polymers. These have relatively high glass transition properties compared to the lower homologs derived from itaconimides (α‐methylenesuccinimides). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1020–1026