Radical polymerization in the presence of peroxide and reducing agent monomer for branched polymers

In this article, we report the radical polymerization in the presence of peroxide and commercially available or designed reducing agent monomer (RAM) for the preparation of branched poly(methyl methacrylate)s (PMMAs). The reaction behavior of the RAM was studied by NMR. Triple‐detection SEC (TD‐SEC) analysis was used to confirm the branching structure of the prepared PMMAs and to investigate the influence of peroxide concentration and RAM concentration on molecular weight and branched structure. The obtained branched PMMAs exhibited high molecular weights and relatively narrow polydispersities at high conversion of MMA. Interestingly, a significant increase in molecular weight and degree of branching of the obtained polymers are observed in higher BPO concentration, these results are quite different from that reported in the literature. The unique radical polymerization mechanism in the RAM/BPO redox‐initiated radical polymerization system resulted in branched PMMAs with high molecular weights at relatively high RAM and BPO concentrations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 833–840     

Rational design of methacrylate monomers containing oxadiazole moieties for single‐layer organic light emitting devices

Methacrylate derived monomers functionalized with pendant oxadiazole moieties were synthesized and copolymerized with carbazole containing monomers to form polymers with electron and hole transporting fragments in the same molecule. Substituents on the oxidazole moiety were varied with the purpose of bandgap tuning and performance optimization when employed in single‐layer organic light emitting devices (OLED). Quantum mechanical calculations of the HOMO‐LUMO levels of the oxidazole derivatives were used to down‐select promising candidates for chemical synthesis and testing in single‐layer OLEDs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1663–1673     

Synthesis of New Poly(biphenylene oxide) with Pendent Trifluoromethyl Group

A new AB type of monomer 4′-fluoro-3,5-dimethyl-3′-trifluoromethyl-biphenyl-4-ol has been synthesized that leads to a new poly(arylene ether) by self polycondensation reaction. The monomer and the polymer have been well characterized by elemental analyses, FT-IR and NMR spectroscopy. Both FT-IR and NMR spectra of the polymers did not show any terminal phenoxy group indicating high conversion. The polymer showed glass transition at 278°C and very good thermal stability in synthetic air. GPC results indicate high molar mass development; Mw = 53200 and MWD = 2.29.     

Reactive jammer detection in OFDM with index modulation

Detection of jamming attacks is an important tool to improve the resource efficiency of jammer resilient communication networks. Detecting reactive jammers is especially difficult since the attacker is cognitive and focuses only on the used channels. Orthogonal frequency division multiplexing with index modulation (OFDM-IM) consists of active and passive subcarriers. Only active subcarriers carry modulated signals while passive subcarriers are left unused. In OFDM-IM systems, information bits are also dynamically embedded in the indices of these active subcarriers. As a result, remaining passive subcarriers cause instantaneously changing and unused holes in the spectrum that a reactive jammer cannot escape from attacking. In this paper, we propose an OFDM-IM-based detection scheme to improve the detection performance against reactive jammers. The proposed method exploits the dynamically changing empty OFDM-IM subcarriers to improve detection performance. A detection mechanism that is based on the variance of received signals is considered to identify the jammed subcarriers reliably and with low complexity. We assumed a destructive and elusive reactive jammer model that applies a zero-mean Gaussian jamming signal to the occupied channels. The performance of the variance detector is investigated analytically for OFDM-IM and OFDM-based systems under the given jammer model. The results showed that passive subcarriers of OFDM-IM inherently provide a better detection performance compared to the classical OFDM. Lastly, the analytical results are verified via simulations against both full-band and partial-band reactive jammers. Also, the effect of noise and the jamming power on the detection performance is investigated via extensive simulations.     

Synthesis,Antimicrobial Activity and Semi-conducting Properties of Novel 2-(4-Chloro-1-Naphtyloxy)-2-Oxoethyl Methacrylate with 2-(Diethylamino)Ethyl Methacrylate Copolymers

The free-radical initiated copolymerization of 2-(4-chloro-1-naphtyloxy)-2-oxoethyl methacrylate (ClNOEMA) with 2-(diethylamino) ethyl methacrylate (DEAEMA) was carried out in 1,4-dioxane solution at 70 ± 1°C using 2,2′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios (ranging from 0.15 to 0.85) in the feed. The copolymer composition obtained by elemental analysis led to the determination of reactivity ratios employing Fineman-Ross (F-R) and Kelen-Tüdös (KT) linearization methods. These parameters were also estimated using a non-linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The prepared homo and copolymers were tested for their antimicrobial activity against bacteria and yeast. These copolymers have been converted into novel salts by reaction with the iodemethane (CH₃I). The copolymers and the corresponding salts have been characterized fully by a range of spectroscopic analysis techniques. The electrical conductivity dependence of temperature of the polymers were measured and the polymers exhibit the semi-conducting behavior, confirming that the electrical conductivity increases with increasing temperature. The poly(CINOEMA-co-DEAEMA) polymer doped by CH₃I for 15 min shows the highest conductivity. The optical band gap, activation energy and room temperature conductivity values of these polymers were obtained. These electronic parameters suggest that the poly(CINOEMA-co-DEAEMA)s doped by CH₃I for 15 min is an organic semiconductor with the thermally activated conduction mechanism.     

Design,Synthesis, and Properties of Substituted Polyacetylenes

This article reviews recent topics on the polymerization of substituted acetylenes, focusing on the synthesis of poly(diphenylacetylenes) and the living polymerization of phenylacetylenes. Diphenylacetylene (DPA) polymerizes with TaCl_s-n-Bu₄Sn to give a polymer which is thermally very stable but insoluble in any solvents. DPAs with various groups (e.g.,p-Me₃Si,m-Me₃Ge, p-t-Bu,and_p-PhO) polymerize similarly. These polymers are soluble and their M¯_w's reach 1 × 10⁶ to 3 × 10⁶. Some of them are more gas-permeable than poly(dimethylsiloxane). Several acetylenes (e.g., ClC -n-C₆H₁₃ and HCUC-t-Bu) have been found to undergo living polymerization with MoOCl₄-n-Bu₄Sn-EtOH. Whereas phenylacetylene (PA) does not polymerize in a living fashion, ortho-substituents in PA more or less suppress termination and chain transfer. PAs with bulky ortho groups (e.g., CF₃ and Me₃Ge) especially undergo virtually ideal living polymerization.     

Microbial Screening of Copolymers of N‐Vinylimidazole with Phenacyl Methacrylate: Synthesis and Monomer Reactivity Ratios

N‐vinylimidazole (VIM), and phenacyl methacrylate (PAMA) copolymerized with different feed ratios using 1,4‐dioxane as a solvent and α,α'‐azobisisobutyronitrile (AIBN) as an initiator at 60°C. Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis (content of N for VIM‐units) and by Fourier transform infrared spectroscopy through recorded analytical absorption bands for VIM (670 cm^?1 for C‐N of imidazole ring) and PAMA (1730 cm^?1 for C?O of ester group) units, respectively. Monomer reactivity ratios for VIM (M₁)‐PAMA (M₂) pair were determined by the application of conventional linearization methods such as Fineman‐Ross (F‐R) and Kelen‐Tüdös (KT) and a nonlinear error invariable model method using a computer program RREVM. The molecular weights (_w and _n) and polydispersity indices of the polymers were determined using gel permeation chromatography (GPC). Thermal behaviors of copolymers with various compositions were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Also, the apparent thermal decomposition activation energies (ΔE_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance. The antibacterial and antifungal effects of polymers were also tested on various bacteria, fungi and yeast.     

Synthesis and Liquid Crystalline Behavior of Random Copolymer of Poly(ethylene oxide) Macromonomer and Liquid Crystalline Monomer by the Photon Transmission Technique

Random copolymers of poly(ethylene oxide) macromonomer with p‐vinylbenzyl end‐functional group (PEOVB) and liquid crystalline monomer, namely 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate (COA), were prepared by conventional free radical polymerization. A living anionic polymerization technique was employed for the synthesis of PEO macromonomers bearing p‐vinylbenzyl moiety at one end. The photon transmission method was also applied to study the phase transitions of COA monomer and its random copolymer with PEO. It was found that, for both samples, the nematic‐smectic A transition is continuous, but the critical fluctuation regions do not allow to obtain 3D XY values. Instead, we have obtained the values close to mean field regime. Scaling of thermal hystersis for random copolymer sample near the nematic‐isotropic transition was studied as well. Thermal hysteresis loops were produced under linearly varying temperature. It was shown that the areas of the hysteresis loops scale with the temperature scanning rate with an exponent being equal to 0.614 which is in good agreement with the field‐theoretical value.