Intensification of formic acid from dilute aqueous solutions using menthol based hydrophobic deep eutectic solvents

The fermentation of biomass and organic waste streams is the primary source of formic acid production. Formic acid is the hydrogen energy carrier and is used as a hydrogen storage medium in fuel cells. Sustainable production of formic acid makes the hydrogen-fuel cell entirely environmentally friendly and ensures the long-term storage of renewable energy. Therefore, green, economic, and sustainable production and recovery of formic acid are highly demanded. In this study, it was aimed to use a new generation, green, easily prepared, and designer hydrophobic deep eutectic solvents (HDES) for the removal of formic acid via reactive extraction. HDESs obtained by preparing binary mixtures of nonanoic acid, decanoic acid, dodecanoic acid (HBD), and menthol (HBA) were used as diluents; tri-n-octylamine (TOA) and Amberlite LA-2 (Amb.LA-2) were acted as extractants. Experiments were performed to investigate the effect of extractant type and concentration, initial acid concentration, and volume of the organic phase on extraction. Experimental data were presented by calculating the extraction efficiency (E%), distribution coefficient (D), and loading factor (Z). Results demonstrated that the extraction efficiency remained between 10 and 13% when performing physical extraction using M-NA, M-DA, and M-DDA, while TOA was diluted with the same HDESs reached around 90% and with Amb.LA-2 85%. The highest distribution coefficient was obtained that the organic phase consisting of TOA and M-DDA mixture was used. The efficiency of utilized HDESs was in the following order: M-DDA ?> ?M-DA ?> ?M-NA.     

A semi-analytical solution for linearized multicomponent cation exchange reactive transport in groundwater

Cation exchange in groundwater is one of the dominant surface reactions. Mass transfer of cation exchanging pollutants in groundwater is highly nonlinear due to the complex nonlinearities of exchange isotherms. This makes difficult to derive analytical solutions for transport equations. Available analytical solutions are valid only for binary cation exchange transport in 1-D and often disregard dispersion. Here we present a semi-analytical solution for linearized multication exchange reactive transport in steady 1-, 2- or 3-D groundwater flow. Nonlinear cation exchange mass–action–law equations are first linearized by means of a first-order Taylor expansion of log-concentrations around some selected reference concentrations and then substituted into transport equations. The resulting set of coupled partial differential equations (PDEs) are decoupled by means of a matrix similarity transformation which is applied also to boundary and initial concentrations. Uncoupled PDE’s are solved by standard analytical solutions. Concentrations of the original problem are obtained by back-transforming the solution of uncoupled PDEs. The semi-analytical solution compares well with nonlinear numerical solutions computed with a reactive transport code (CORE^2D) for several 1-D test cases involving two and three cations having moderate retardation factors. Deviations of the semi-analytical solution from numerical solutions increase with increasing cation exchange capacity (CEC), but do not depend on Peclet number. The semi-analytical solution captures the fronts of ternary systems in an approximate manner and tends to oversmooth sharp fronts for large retardation factors. The semi-analytical solution performs better with reference concentrations equal to the arithmetic average of boundary and initial concentrations than it does with reference concentrations derived from the arithmetic average of log-concentrations of boundary and initial waters.     

Efficient integration of stiff kinetics with phase change detection for reactive reservoir processes

We propose the use of implicit one-step Explicit Singly Diagonal Implicit Runge–Kutta (ESDIRK) methods for integration of the stiff kinetics in reactive, compositional and thermal processes that are solved using operator-splitting type approaches. To facilitate the algorithmic development we construct a virtual kinetic cell model. The model serves both as a tool for the development and testing of tailored solvers as well as a testbed for studying the interactions between chemical kinetics and phase behavior. As case study, two chemical kinetics models with 6 and 14 components, respectively, are implemented for in situ combustion, a thermal oil recovery process. Through benchmark studies using the 14 component reaction model the new ESDIRK solvers are shown to improve computational speed when compared to the widely used multi-step BDF methods DASSL and LSODE. Phase changes are known to cause convergence problems for the integration method. We propose an algorithm for detection and location of phase changes based on discrete event system theory. Experiments show that the algorithm improves the robustness of the integration process near phase boundaries by lowering the number convergence and error test failures by more than 50% compared to direct integration without the new algorithm.     

Rheological properties of reactive polymer melts.

A new method for describing the rheological properties of reactive polymer melts, which was presented in an earlier paper, is developed in more detail. In particular, a detailed derivation of the equation of a first-order rheometrical flow surface is given and a procedure for determining parameters and functions occurring in this equation is proposed. The experimental verification of the presented approach was carried out using our data for polyamide-6.Notation E Dimensionless reduced viscosity, eq. (34) - E ₀ Newtonian asymptote of the function (36) - E power-law asymptote of the function (36) - E _{= 1} the value ofE at = 1 - k degradation reaction rate constant, s^–1 - k ₁ rate constant of function (t), eq. (26), s^–1 - k ₂ rate constant of function (t), eq. (29), s^–1 - K(t) residence-time-dependent consistency factor, eq. (22) - M _w weight-average molecular weight - M _x x-th moment of the molecular weight distribution - R gas constant - S _x M _x /M _w - t residence time in molten state, s - t _j thej-th value oft, s - T temperature, K - % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xd9vqpe0x% c9q8qqaqFn0dXdir-xcvk9pIe9q8qqaq-xir-f0-yqaqVeLsFr0-vr% 0-vr0db8meaabaqaciGacaGaaeqabaWaaeaaeaaakeaaieGaceWFZo% Gbaiaaaaa!3B4E!\[\dot \gamma \] shear rate, s^–1 - _i thei-th value of , s^–1 - _r =1 the value of at = 1, s^–1 - ^* reduced shear rate, eq. (44), s^–1 - dimensionless reduced shear rate, eq. (35) - viscosity, Pa · s - shear-rate and residence-time dependent viscosity, Pa · s - zero-shear-rate degradation curve - degradation curve at - _{t0 (t)} zero-residence-time flow curve - Newtonian asymptote of the RFS - instantaneous flow curve - power-law asymptote of the RFS - _0,0 zero-shear-rate and zero-residence-time viscosity, Pa · s - _E=1 value of viscosity atE=1, Pa · s - ^* reduced viscosity, eq. (43), Pa · s - zero-residence-time rheological time constant, s - density, kg/m³ - (t),(t) residence time functions     

Synthesis,crystal structure of a novel tetranuclear Cu (Ⅱ) complex and its application in GSH-triggered generation of reactive oxygen species for chemodynamic therapy

A novel tetranuclear copper complex (TCC) has been successfully synthesized and characterized using high resolution mass spectrometry (HRMS), Fourier transform infrared spectroscopy (FTIR) and X-ray single crystal diffraction technique. TCC was capable of triggering by Glutathione (GSH) to produce Cu (Ⅰ), then the resulted Cu (Ⅰ) further converted the overexpression of endogenous H₂O₂ into •OH, a highly cytotoxic reactive oxygen species (ROS), thereby killing the cancer cells. TCC showed high cytotoxicity to 4T1, MCF7, HepG2 cancer cells. Interestingly, the cytotoxicity of TCC to non-cancerous cells is much lower than that of cancer cells. Cell cycle experiments demonstrated that TCC was capable of arresting the cancer cell cycle in the G2/M phase. The apoptosis experiments shown that TCC could induce apoptosis rather than necrosis.     

Synthesis of Poly(styrene sulfonyl chloride) via reversible addition-fragmentation chain transfer polymerization and characterization thereof for membrane applications

Reversible addition-fragmentation chain transfer (RAFT) polymerization has been examined for the synthesis of poly (styrene sulfonyl chloride) (PSSC) of high molecular weight and narrow polydispersity index (PDI). PSSC, contains reactive sulfonyl chloride that can allow use of organic solvent for membrane casting, and chemical modification through reactive sulfonyl groups. For PSSC preparation, end-capped styrene i.e. styrene sulfonyl chloride (SSC) is used as a monomer, which is derived from sodium 4-vinylbenzenesulfonate by chlorination with thionyl chloride. Fourier transform infrared spectroscopy, Raman spectroscopy and Proton nuclear magnetic resonance spectroscopy, have been successfully used to confirm the polymer architecture. End-group of PSSC containing RAFT agent (Cyanomethyl N-methyl-N-phenylcarbamodithioate), is also confirmed by fragmentation analysis using Gas chromatography-mass spectroscopy. Evaluation of PSSC by X-ray diffraction and differential scanning calorimetry showed that resulting polymer is predominantly amorphous in nature and has a glass transition temperature of 119 ​°C. Gel permeation chromatography data reveals formation of high molecular weight (84 ​kDa) PSSC with and low PDI (1.4). Moreover, PSSC can be converted to polyelectrolyte and can be crosslinked by interfacial polymerization concept; hence, it would have considerable prospective for membrane preparation for fuel cell and water purification.     

Hybrid hydrodynamic cavitation (HC) technique for the treatment and disinfection of lake water

Water reclamation from lakes needs to be accomplished efficiently and affordably to ensure the availability of clean, disinfected water for society. Previous treatment techniques, such as coagulation, adsorption, photolysis, ultraviolet light, and ozonation, are not economically feasible on a large scale. This study investigated the effectiveness of standalone HC and hybrid HC + H₂O₂ treatment techniques for treating lake water. The effect of pH (3 to 9), inlet pressure (4 to 6 bar), and H₂O₂ loading (1 to 5 g/L) were examined. At pH = 3, inlet pressure of 5 bar and H₂O₂ loadings of 3 g/L, maximum COD and BOD removal were achieved·H₂O₂ was observed to significantly improve the performance of the HC when used as a chemical oxidant. In an optimal operating condition, a COD removal of 54.5 % and a BOD removal of 51.5 % using HC alone for 1 h is observed. HC combined with H₂O₂ removed 64 % of both COD and BOD. The hybrid HC + H₂O₂ treatment technique resulted in a nearly 100% removal of pathogens. The results of this study indicate that the HC-based technique is an effective method for removing contaminants and disinfection of the lake water.     

ROS-generating alginate-coated gold nanorods as biocompatible nanosonosensitisers for effective sonodynamic therapy of cancer

Sonodynamic therapy (SDT) emerges as a promising non-invasive alternative for eradicating malignant tumours. However, its therapeutic efficacy remains limited due to the lack of sonosensitisers with high potency and biosafety. Previously, gold nanorods (AuNRs) have been extensively studied for their applications in photodynamic or photothermal cancer therapy, but their sonosensitising properties are largely unexplored. Here, we reported the applicability of alginate-coated AuNRs (AuNRs^ALG) with improved biocompatibility profiles as promising nanosonosensitisers for SDT for the first time. AuNRs^ALG were found stable under ultrasound irradiation (1.0 W/cm², 5 min) and maintained structural integrity for 3 cycles of irradiation. The exposure of the AuNRs^ALG to ultrasound irradiation (1.0 W/cm², 5 min) was shown to enhance the cavitation effect significantly and generate a 3 to 8-fold higher amount of singlet oxygen (¹O₂) than other reported commercial titanium dioxide nanosonosensitisers. AuNRs^ALG exerted dose-dependent sonotoxicity on human MDA-MB-231 breast cancer cells in vitro, with ∼ 81% cancer cell killing efficacy at a sub-nanomolar level (IC₅₀ was 0.68 nM) predominantly through apoptosis. The protein expression analysis showed significant DNA damage and downregulation of anti-apoptotic Bcl-2, suggesting AuNRs^ALG induced cell death through the mitochondrial pathway. The addition of mannitol, a reactive oxygen species (ROS) scavenger, inhibited cancer-killing effect of AuNRs^ALG-mediated SDT, further verifying that the sonotoxicity of AuNRs^ALG is driven by the production of ROS. Overall, these results highlight the potential application of AuNRs^ALG as an effective nanosonosensitising agent in clinical settings.     

Investigating Lignin-Derived Monomers and Oligomers in Low-Molecular-Weight Fractions Separated from Depolymerized Black Liquor Retentate by Membrane Filtration

Base-catalyzed depolymerization of black liquor retentate (BLR) from the kraft pulping process, followed by ultrafiltration, has been suggested as a means of obtaining low-molecular-weight (LMW) compounds. The chemical complexity of BLR, which consists of a mixture of softwood and hardwood lignin that has undergone several kinds of treatment, leads to a complex mixture of LMW compounds, making the separation of components for the formation of value-added chemicals more difficult. Identifying the phenolic compounds in the LMW fractions obtained under different depolymerization conditions is essential for the upgrading process. In this study, a state-of-the-art nontargeted analysis method using ultra-high-performance supercritical fluid chromatography coupled to high-resolution multiple-stage tandem mass spectrometry (UHPSFC/HRMSⁿ) combined with a Kendrick mass defect-based classification model was applied to analyze the monomers and oligomers in the LMW fractions separated from BLR samples depolymerized at 170–210 °C. The most common phenolic compound types were dimers, followed by monomers. A second round of depolymerization yielded low amounts of monomers and dimers, while a high number of trimers were formed, thought to be the result of repolymerization.