Spherical dye-doped silica particles

Organic dyes such as water soluble porphyrins were incorporated into monodispersed SiO₂ particles using the sol-gel technique (the Stober synthesis) and their monomeric and dimeric properties were investigated by aiming at the microcavity effect. Doping efficiencies of dyes into SiO₂ particles depended on dye's hydrophilic properties. The doping efficiency of a porphyrin, TTMAPP, decreased with increasing the nominal content in the starting solution and the doping content showed the maximum value of 1.6×10^–5 mol/g SiO₂. With increasing the TTMAPP content, spectra of doped particles were changed from dimeric to monomeric nature; the absorption peak due to dimers disappeared and halfwidth of absorption at Soret band decreased. This unusual change was caused by the decrease of particle sizes by dye doping. The TTMAPP-doped sample having monomeric spectrum showed the fluorescence life time of 8.5 nsec and photochemical hole burning at about 5 K.     

Synthesis and polymerization of a new nitrogen‐containing bis‐ortho‐diynylarene monomer

This study focuses on the preparation, characterization, and optical properties of new bis(3,4‐diphenylethynylphenyl)phenylamine. This is the first nitrogen‐containing bis‐ortho‐diynylarene (BODA) monomer having a nitrogen atom as the spacer group. BODA monomers are usually prepared from common bisphenols, thereby providing great synthetic versatility and the opportunity to develop a wide array of novel polyarylene thermosets by varying the aromatic spacer group. The new bis(3,4‐bisphenylethynylphenyl)phenylamine was synthesized in five steps. This compound emits an intense blue color (λ = 438 nm) upon irradiation by UV light and may be suitable for use as an emitting layer in electroluminescent devices. Bis‐(3,4‐bisphenylethynylphenyl)phenylamine and its polymer have photoluminescence quantum yields 34 and 38%, respectively, and long excited‐state lifetimes of 3.2 and 3.6 ns, respectively. The structure of the monomer and its polymer were characterized using spectroscopic techniques including Ultraviolet–visible Spectrophotometer, Photoluminescence Spectrophotometer, Fourier Transform infrared spectroscopy, and Gel Permeation Chromatography. The polymerizations were studied by Differential Scanning Calorimeter. The amount of weight loss and the thermostability of the nitrogen‐containing polymer were determined from thermogravimetric analysis. The electrical conductivity of neat HCl‐doped BODA‐derived polymer film was measured according to the standard four‐point probe technique. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6988–6996, 2006     

Optical properties of In2O3 oxidized from InN deposited by reactive magnetron sputtering

Unintentionally doped and zinc-doped indium nitride (U-InN and InN:Zn) films were deposited on (0 0 0 1) sapphire substrates by radio-frequency reactive magnetron sputtering, and all samples were then treated by annealing to form In₂O₃ films. U-InN and InN:Zn films have similar photon absorption characteristics. The as-deposited U-InN and InN:Zn film show the absorption edge, ∼1.8-1.9 eV. After the annealing process at 500 °C for 20 min, the absorption coefficient at the visible range apparently decreases, and the absorption edge is about 3.5 eV. Two emission peaks at 3.342 eV (371 nm) and 3.238 eV (383 nm) in the 20 K photoluminescence (PL) spectrum of In₂O₃:Zn films were identified as the free-exciton (FE) or the near band-to-band (B-B) and conduction-band-to-acceptor (C-A) recombination, respectively.     

Radiation induced synthesis and swelling characterization of thermo-responsive N-isopropylacrylamide-co-ionic hydrogels

Two-component thermo-responsive hydrogels poly(N-isopropylacrylamide)-co-vinylbenzyltrimethylammonium chloride (NIPA-co-VBT) and poly(N-isopropylacrylamide)-co-p-sodium styrene sulphonate (NIPA-co-SSS) were prepared by using high energy gamma radiation. The gels were characterized by Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and sol-gel analysis. The presence of ionic monomers in NIPA leads to lower gel content. Introduction of ionic components in the matrix enhanced swelling extent but caused slower volume transition. The swelling studies in alcohol indicated that swelling extent was function of polarity of the swelling medium and all gels followed the order water > methanol > ethanol > iso-propanol. In mixed co-solvents (water-alcohol), they exhibit complex reentrant behavior. The co-polymer gels containing VBT swelled faster and to higher extent than those containing SSS. The dynamic swelling studies indicated that diffusion of water in PNIPA gel shifts from Fickian for PNIPA to anomalous for NIPA-co-ionic gels also the mean swelling time (MST) decreases for gels containing ionic monomers.     

亚麻等麻类纤维与乙烯基类单体接枝共聚反应的研究进展

近年来,乙烯基类单体与亚麻、大麻、苧麻等麻类纤维的接枝共聚反应已得到关注。本文着重总结接枝的引发方法,包括:1.辐射引发接枝;2.光引发接枝;3.Ce(Ⅳ)离子引发接枝;4.锰盐引发接枝;5.V(Ⅴ)离子引发接枝;6.Fenton's 试剂(Fe~(2+)-H_2O_2)引发接枝;7.过硫酸盐氧化还原引发体系接枝。上述各类引发体系及接枝纤维的结构与性能表征均在本文中作了述评。     

多组分单体接枝聚丙烯/尼龙6反应共混物结晶行为研究

用多组分熔融接枝的方法将甲基丙烯酸缩水甘油酯 (GMA)和苯乙烯 (St)共同接枝到聚丙烯 (PP)上 ,制得具有较高GMA接枝率的多单体接枝聚丙烯 ,PP g (GMA co St) .将PP g (GMA co St)与尼龙 6 (PA6 )进行共混 ,利用扫描电镜 (SEM) ,差示扫描量热计 (DSC)和广角X射线衍射 (WAXD)对共混物的形态和结晶进行了研究 .在共混过程中 ,PP g (GMA co St)与PA6反应原位生成了PP g PA6 ,有效改善了共混物的相容性 ,分散相尺寸明显减小 .在PP g (GMA co St) PA6为 3 7的体系中 ,PP g (GMA co St)出现分级结晶现象 ,其在较低温度下的结晶属于均相成核结晶 .在PP g (GMA co St) PA6为 7 3的体系中 ,由于PA6相分散细微 ,在通常结晶温度下不结晶 ,而是在低温下均相成核与PP g (GMA co St)同时结晶 .WAXD证实体系中接枝PP ,PA6为分别结晶 ,无共晶或新的晶型产生     

多官能单体TMPTA在LDPE表面光接枝聚合研究

以二苯甲酮(BP)为光引发剂、丙酮和水的混合物为溶剂,研究了室温下多官能单体三羟甲基丙烷三丙烯酸酯(TMPTA)在低密度聚乙烯(LDPE)表面的光接枝聚合(λ>300nm).研究表明,多官能单体的接枝速率较快,接枝聚合易产生交联结构,聚合后仍残留双键;延长聚合反应时间、增加单体用量有利于单体接枝转化率的提高;随引发剂用量增加,单体接枝转化率出现一峰值;在研究范围内,混合溶剂中水含量增加可使单体接枝转化率明显提高.扫描电镜观察到接枝膜表面形成了许多小球,表面粗糙度增加,疏水性提高.     

Radiation induced polymerization of vinyl monomers and their application for preparation of wood-polymer composites

Polymerizing effects of high energy radiation has been found suitable for preparation of wood-polymer composites. In the present work after evaluating polymer products that have been obtained by irradiation method, wood-polymer composites have been prepared by in situ polymerization of vinyl acetate, acrylic acid and acrylic acid/styrene mixture using two samples of Iranian hardwoods, Beech and Hornbeam. These woods and their composites have been tested for their physical and mechanical properties. The results have shown that chemical bonding between polymer and the cell wall component lead to better strength properties in the composites.     

四种硝基苯的电化学行为及其反应活性的理论计算

在滴汞电极上研究了硝基苯、对硝基甲苯、间二硝基苯及2，4-二硝基氯苯的电化学行为，并用量子理论对四种硝基苯化合物的反应活性进行了预测，理论与试验结果基本一致，据此提出了预测分子的电化学活性的方法。     

Solid-State polymerization of the binary mixture of methacrylate and liquid-crystalline compound by electron beam

Solid-state polymerization of a binary mixture of nonliquid-crystalline monomer and liquidcrystalline compound was carried out using electron beam. The monomers were benzoic acid containing 4-[ω-(meth)acryloyloxyalkyloxy] benzoic acids, in which the alkylene spacer was ethylene, hexamethylene, or undecamethylene. The conversion yield of monomer to polymer to a large extent increased with increasing content of a liquid-crystalline compound with a terminal carboxylic group, such as 4-n-alkyloxybenzoic acid, while the addition of a liquid-crystalline compound without terminal carboxylic group did not affect polymerization of the monomer. Phase diagrams of the mixture of monomer and liquid-crystalline compound were examined using cross-polarizing microscopy and differential scanning calorimetry (DSC). All mixtures of monomer and 4-n-alkyloxybenzoic acid or liquid-crystalline compound without terminal carboxylic group showed liquid-crystallinity in a broad composition range. It was concluded that liquid-crystalline compounds with terminal carboxylic acid may form hydrogen bondings with methacrylate or acrylate monomer having terminal carboxylic acid which enhance polymerizability of the mixture. The stereoregularity of polymers determined by NMR depended on increasing irradiation dose and temperature rather than the content of the added liquid-crystalline 4-n-decanoxybenzoic acid.