Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. II: Effect of different polyamides on the properties of extruded samples

Poly(butylene terephthalate) (PBT) and a sample of polyamide have been melt processed in the presence of two new phosphazene compounds, namely 2,2-dichloro-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclotriphosphazene (2Cl-CP) and 2,2-bis(2-methoxy-4-methyleneoxy-phenoxy)-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclophosphazene (CP-2EPOX).The blends were prepared by using polyamide 6 (PA6) and polyamide 6,6 (PA66) in 25/75 and 75/25 w/w compositions by using a co-rotating twin-screw extruder.The materials have been completely characterized from a mechanical, rheological, and morphological point of view. The results indicate that the additives used cause an increase of the rupture properties and of the viscosity, especially in the PA6 rich blends containing CP-2EPOX. This result can be not only attributed to a chain extension effect on the PA phase but also to in situ formation of PA/PBT copolymers promoted by the presence of the CP compound as confirmed by NMR and MALDI-TOF analyses. The compatibilization effect fades in blends containing PA66, probably due to a thermal deactivation of the additives at higher temperature required to process this polymer.     

The extraction,antioxidant and against β-amyloid induced toxicity of polyphenols from Alsophila spinulosa leaves

Alsophila spinulosa is a tree-like fern, and many evidences suggested that plant polyphenols had the potential therapeutic for Alzheimer s disease (AD). Herein, polyphenols (ASP) was isolated from A. spinulosa leaves and its major constituent were isoorientin and vitexin. ASP displayed excellent antioxidant activity and obvious anti-lipid peroxidation capacity in vitro. ASP improved the survival rate of C. elegans under high temperature by enhancing the antioxidant enzymes activities and decreasing the lipid peroxidation level. Moreover, ASP alleviated β-amyloid (Aβ) induced paralysis and reduced Aβ deposition, decreased reactive oxygen species (ROS) accumulation and improved the level of skn-1 mRNA. In addition, ASP decreased the levels of pdk-1 and akt-1 mRNA in P13K/AKT signaling pathway. In conclusion, ASP may be a potential ingredient for the alleviation of AD.     

Sources and Time-Variations of Reactive Hydrocarbon Immissions in the Atmosphere of Different Industrial and Rural Areas

Abstract

The problem of determining the concentration changes of reactive hydrocarbon immissions as a function of time was solved by means of an automatic gas chromatograph which, without enrichment, could record ethylene and acetylene in ppb concentrations. At the same time various other pollutants were covered, so that by a mutual allocation of the individual components it was possible to identify certain emitter groups. The results clearly show that ethylene and acetylene primarily originate from the combustion processes of the automobiles, while the handling and storage of petroleum products and their processing do not exert any influence on the immission of the two components. By way of time series measurements during a summer week in 1976 with very intensive solar radiation it was possible to show indirect secondary photochemical reactions.     

Adaptation of a load-inject valve for a flow injection chemiluminescence system enabling dual-reagent injection enhances understanding of environmental Fenton chemistry

Environmental Fenton chemistry has been poorly constrained within the marine environment at a multi-component level. A simple, unique, reconfiguration of a flow-injection analytical system combined with luminol chemiluminescence allows quasi-simultaneously the measurement, using a single load-inject valve and a single photon multiplier tube, of reduced iron, Fe(II), and hydrogen peroxide. The system enables rapid, every 22 s, measurements with good accuracy at environmentally relevant concentrations, less than 5% relative standard deviations on both a 5 nM Fe(II) standard and a 60 nM hydrogen peroxide standard. Limits of detection were as low as 40 pM Fe(II) and 100 pM hydrogen peroxide. The system showed excellent capability by measuring from within an organic rich seawater the photochemically induced production of Fe(II) and hydrogen peroxide and their subsequent cycling and Fenton like interactions.     

Chemical modification of poly(lactic acid) and its use as matrix in poly(lactic acid) poly(butylene adipate-co-terephthalate) blends

Poly(lactic acid), PLA, was chemically modified with maleic anhydride (MA) by reactive extrusion. The effect of this modification on molar mass (MM) and acidity was assessed by means of size-exclusion chromatography (SEC) and titration, respectively. PLA MM decreased in the presence of MA solely and of MA and peroxide. Reduction in MM was monitored by the increase in acidity. PLA blends containing poly(butylene adipate-co-terephthalate) (PBAT) were prepared through different mixing protocols, PLA/PBAT, PLA-g-MA/PBAT and PLA/PBAT/MA/peroxide (PLA/PBAT in situ). SEC results and rheological properties revealed reduction in MM and viscosity of the modified blends. PLA/PBAT presented increase in MM and bimodal MM distribution. The calculated interfacial tension was significantly lower for the modified blends, despite the lower average particle area of PLA/PBAT. Surprisingly, the modified blends presented higher yield strength than that predicted by the rule of mixtures, which might indicate interfacial reactions.     

Reactive jammer detection in OFDM with index modulation

Detection of jamming attacks is an important tool to improve the resource efficiency of jammer resilient communication networks. Detecting reactive jammers is especially difficult since the attacker is cognitive and focuses only on the used channels. Orthogonal frequency division multiplexing with index modulation (OFDM-IM) consists of active and passive subcarriers. Only active subcarriers carry modulated signals while passive subcarriers are left unused. In OFDM-IM systems, information bits are also dynamically embedded in the indices of these active subcarriers. As a result, remaining passive subcarriers cause instantaneously changing and unused holes in the spectrum that a reactive jammer cannot escape from attacking. In this paper, we propose an OFDM-IM-based detection scheme to improve the detection performance against reactive jammers. The proposed method exploits the dynamically changing empty OFDM-IM subcarriers to improve detection performance. A detection mechanism that is based on the variance of received signals is considered to identify the jammed subcarriers reliably and with low complexity. We assumed a destructive and elusive reactive jammer model that applies a zero-mean Gaussian jamming signal to the occupied channels. The performance of the variance detector is investigated analytically for OFDM-IM and OFDM-based systems under the given jammer model. The results showed that passive subcarriers of OFDM-IM inherently provide a better detection performance compared to the classical OFDM. Lastly, the analytical results are verified via simulations against both full-band and partial-band reactive jammers. Also, the effect of noise and the jamming power on the detection performance is investigated via extensive simulations.     

Vinyl Polymerization. 386. Polymerization of Methyl Methacrylate Initiated by Imidazole in Aqueous Solution of Copper(II) Chloride

The radical polymerization of methyl methacrylate (MMA) was carried out with the system of imidazole (Im), copper(n) chloride, and water at 85°C. The effects of the amount of each component on the conversion of MMA were investigated. The polymerization proceeded through a radical mechanism. The overall activation energy was estimated to be 28.7 kJ/mole. The conversion of MMA showed a maximum at pH 8-9 of the aqueous solution. The formation of a complex of CuCl₂ with Im, water, and MMA was confirmed by electronic spectra. An initiation mechanism was proposed.     

CHARACTERIZATION OF MELT-MIXED POLY(ETHYLENE-2,6-NAPHTHALATE) (PEN)/POLYCARBONATE (PC) BLENDS

ABSTRACT

Melt blending of poly(ethylene naphthalate) (PEN) and bisphenol A polycarbonate (PC) was performed without the addition of catalyst in a batch mixer at 290°C at various compositions. All the blends prepared exhibited a biphasic character and had very good mechanical properties, in some cases, even better than those of the respective pure constituents. This behavior was attributed to a copolymer formation in the mesophase, which effectively compatibilizes the system. The formation of a PEN/PC block copolymer was considered to be due to transesterification reactions between PEN and PC and was verified by extraction experiments and examination of the soluble and insoluble fractions by various spectroscopic techniques.     

Phosphorylated silica/polyamide 6 nanocomposites synthesis by in situ sol–gel method in molten conditions: Impact on the fire-retardancy

Polyamide 6 (PA6)/phosphorylated silica nanocomposites were synthesized during PA6 extrusion through in situ formation of the inorganic phase without solvent. This synthesis is based on the hydrolysis-condensation reactions of diethylphosphatoethyltriethoxysilane (SiP) as a functional inorganic precursor in combination with or without tetraethoxysilane (TEOS) dispersed in the molten PA6. This synthesis is carried out during PA 6 matrix extrusion that means at high temperature and under shear. The characterization of the in situ synthesized PA6/phosphorylated silica nanocomposites by solid ²⁹Si Nuclear Magnetic Resonance (NMR), Small Angle X-ray Scattering (SAXS) and Transmission Electron Microscopy (TEM) coupled with Energy Dispersive X-ray spectroscopy (EDX) demonstrated the possibility to directly create in less than 5 min at 220 °C a phosphorylated silica uniformly dispersed in the PA6, i.e. in the form of well dispersed particles or aggregates of sub-micron range. The influence of silicon and phosphorus on the thermal and fire retardant behaviour was investigated by thermogravimetric analysis (TGA), cone calorimeter and UL94 tests. The fire retardant behaviour was modified with a formation of a char and a peak heat release rate (PHRR) decrease by more than 50% for the SiP based nanocomposite compared to the pure PA6.     

采用反应挤出三次加料法合成苯乙烯/异戊二烯/苯乙烯

以同向啮合双螺杆挤出机为反应器,采用苯乙烯和异戊二烯为聚合单体,以正丁基锂为引发剂,采用三次加料法合成苯乙烯/异戊二烯/苯乙烯(SIS)三嵌段热塑性弹性体.氢核磁共振(1H NMR)谱分析结果表明,共聚物中聚异戊二烯嵌段以1,4-结构为主.采用四氧化锇催化双氧水氧化降解聚合物分子链,利用凝胶渗透色谱对氧化降解后的聚苯乙烯碎片进行分析,证明共聚物分子为(聚苯乙烯-聚异戊二烯-聚苯乙烯)(PS-PI-PS)三嵌段结构.动态力学分析(DMA)及透射电子显微镜(TEM)分析结果表明,SIS具有两相分离结构.拉伸试验结果表明,共聚物拉伸强度与苯乙烯含量有关.