Design of a capillary-microreactor for efficient Suzuki coupling reactions

A Pyrex glass capillary (0.4 mm internal diameter) microreactor was developed and used for Suzuki coupling reactions. Capillary-microreactors are more attractive than photolithographic microfluidic devices in terms of simplicity, low cost and ease of handling. Compared with the conventional synthesis procedure, our approach of using a capillary-microreactor offers a convenient and highly efficient means to optimize reaction conditions and the performance of catalysts. The procedure exhibits good precision, reproducibility and high reaction yield for a range of reactants investigated.     

Crystallization of poly(N-methyldodecano-12-lactam) in blends with poly(styrene-stat-acrylic acid)

Crystallization behaviour of blends of poly(N-methyldodecano-12-lactam) (PMDL) with statistical copolymer poly(styrene-stat-acrylic acid) (PSAA) has been studied by the DSC and WAXD methods. The blend films prepared from dioxane solutions were crystallized at laboratory temperature for five days. Approximate crystallinities of as-prepared neat lower- PMDL 5 and higher-molecular weight PMDL 45 were 28% and 19%, respectively. With increasing PSAA content in the blends the crystallinities decreased sharply. The melting point of the primary crystalline structure of PMDL showed a decreasing dependence on PSAA content in the blends, confirming miscibility of the PMDL-PSAA pair. Recrystallization was strongly suppressed in the blends. The lower-melting endotherm appearing at about 10-15 °C above the crystallization temperature was attributed to melting to less perfect structures formed during secondary crystallization. In neat PMDL, the extent of secondary crystallization was approximately 5-10%. In the blends containing 20% PSAA approximate relative proportion of secondary crystallites on total crystallinity was 40% and 60% for the blends with PMDL 5 and PMDL 45, respectively. WAXD measurements did not reveal any change in crystal modification on blending. Increased T_g in blends of flexible PMDL cannot play a significant role in suppression of primary in favour of secondary crystallization. This was attributed to low mobility of PMDL chains due to dilution effect and specific interactions with the amorphous copolymer component, and, in case of the higher-molecular-weight PMDL, a greater involvement of entanglements. Higher T_g of blends was involved in retardation of non-isothermal crystallization on cooling and subsequent cold crystallization.     

Effect of temperature of liquid sulphur on kinetics of transformation of chains in its amorphous modification

The rate of transformation of the chains in amorphous sulphur was examined by calorimetry at 298 K. The amorphous samples were remelted at the temperatureT _f in the range from 458 to 573 K. Increase ofT _f decreased the transformation rate. The results satisfy the equationX=1-exp[-(kt)^z] (X=transformation degree,t=time, andk andz=constants). A one-stage transformation was observed for samples remelted atT _f473 K. ForT _f 523 K, transformation in two stages was observed.The effects ofT _f on the kinetics of nucleation and the growth of the nuclei are discussed.     

交联1,4—顺式聚丁二烯的取向结晶

用ＷＡＸＤ和ＳＡＸＳ研究交联１，４－顺式聚丁二烯的取向结晶。结果表明：该试样在拉伸状态时，形成折叠链片晶，而不是伸直链纤维晶。片晶之间断产生新的片晶，使长周期减小，并且片晶的横向尺寸不断增大，由此导致结晶度增大。     

Study of formation of nano-quasicrystals and crystallization kinetics of Zr-Al-Ni-Cu metallic glass

The formation of nano-quasicrystals on isothermal annealing of melt-spun ribbons of Zr_69.5Al_7.5Ni₁₁Cu₁₂ metallic glass has been investigated using transmission electron microscopy (TEM). The crystallization study of this metallic glass has been carried out using differential scanning calorimetry (DSC) in non-isothermal (linear heating) mode. It exhibits two-stage crystallization where the first stage corresponds to the precipitation of icosohedral nano-quasicrystalline phase. This has been confirmed with the help of TEM investigations. The crystallization parameters like the activation energy (E _c) and frequency factor (k ₀) have been derived using the Kissinger peak shift analysis. The activation energies for the first and second crystallization peak are found to be 278 and 295 kJ mol^–1, respectively. The frequency factors obtained for the two peaks are respectively 7.16·10¹⁹ and 1.42·10²⁰ s^–1. E _c, k ₀ and the Avrami exponent (n) have also been derived by fitting the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation for the transformed volume fraction (x) to the crystallization data. JMAK results of E _c for the first and second crystallization peak turn out to be 270 and 290 kJ mol^–1 respectively. However, k ₀ and n are found to be heating rate dependent as reported in similar studies. The values of n for the first crystallization stage ranges between 1.66 and 2.57 indicating diffusion-controlled transformation in agreement with earlier reports.     

Quantum chemical studies on electrophilic addition

The geometries of the 2-chloroethyl and ethylenechloronium cations, two possible intermediates in the electrophilic addition of chlorine to ethylene, have been fully optimized using ab initio molecular orbital calculations employing the split valence shell 4-31G basis set.These geometries were then used to compute more accurate wave functions using Dunning's double-zeta basis set. The bridged chloronium ion was found to be more stable by 9.35 kcal/mole, the opposite order of stability from the C₂H₄F⁺ ions. Interconversion of the two C₂H₄Cl⁺ cations was computed to have a barrier of 6.25 kcal/mole.The activation energy for this chlorination reaction, using the ethylenechloronium cation and a chlorine anion at infinite separation as the model for the activated complex, was computed to be 128.7 kcal/mole, showing that this is not a feasible gas phase reaction.     

Effect of PEG on the crystallization of PPDO/PEG blends

A new biodegradable polymer system, poly(p-dioxanone) (PPDO)/poly(ethylene glycol) (PEG) blend was prepared by a solvent casting method using chloroform as a co-solvent. The PPDO/PEG blends have different weight ratios of 95/5, 90/10, 80/20 and 70/30. Crystallization of homopolymers and blends were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). When 5% of PEG was blended, the crystallization exothermal peaks (T_c) of PPDO increased sharply and the crystallization exothermal peaks (T_c) of PEG decreased slightly compared with the homopolymers. The crystallization rates of both components increased, and caused greater relative crystallization degree (X_t%). But when the content of PEG was more than 5%, the crystalline behaviors of blends had no more significant changes accordingly. The melting points of each sample varied little over the entire composition range in this study. The nonisothermal crystallization of PPDO homopolymer and blend (PPDO/PEG = 70/30) were also studied by DSC. The crystallization began at a higher temperature when the cooling rates were slower. The nonisothermal crystallization kinetics of blends was analyzed by Ozawa equation. The results showed that the Ozawa equation failed to describe the whole crystallization of the blend, but Mo equation could depict the nonisothermal crystallization perfectly.     

Copolyesterification between poly(butylene terephthalate), terephthalic acid and hydroquinone diacetate: a kinetic analysis

The kinetics of liquid crystalline copolyester synthesis via melt transesterification between poly(butylene terephthalate) (PBT), terephthalic acid (TA) and hydroquinone diacetate (HQDA) is examined. Two different copolyester compositions PBT30/(HQDA+TA) 70 and PBT 50/(HQDA+TA) 50 mol% ratio were synthesized. The ratio of HQDA to TA was kept constant for all the reactions.The copolyesters were synthesized via melt polycondensation route at 265°C, 275°C and 285°C using two different transesterification catalysts, zinc acetate and dibutyl tin oxide. A key postulation assumed in this work is that the reaction originates between TA and HQDA to form a dimer which slices PBT chain. The copolyesterification rate constant for a system containing butylene glycol a more nonpolar moiety compared to ethylene glycol in poly(ethylene terephthalate) has been determined. The activation energy values for the different copolymer systems has also been determined. The rate constants for the uncatalyzed and catalyzed copolyesterification reaction and the activation energy values for the reaction have been determined.     

Nitrosation of Phenolic Compounds: Effects of Alkyl Substituents and Solvent

Summary.  Nitrosation reactions of phenol, o-cresol, 2,6-dimethylphenol, o-tert-butylphenol, 2-hydroxyacetophenone, and 2-allylphenol in water and water/acetonitrile were studied. Kinetic monitoring of the reactions was accomplished by spectrophotometric analysis of the nitrosated products at 345 nm. The dominant reaction was C-nitrosation via a mechanism consisting of an attack on the nitrosatable substrate by NO⁺/NO₂H₂ ⁺ followed by a slow proton transfer. The values of the rate constants of phenolic C-nitrosation were increased by electron donating substituents, and a good Hammett correlation was observed with ρ = −6.1. The results also revealed the strong effect of pH and the permitivity of the reaction medium on the rate constant, whose maximum values were observed for pH ≈ 3, decreasing strongly for higher pH values. The study in water/acetonitrile with up to 25% acetonitrile showed that it is possible to inhibit the reaction strongly by increasing the percentage of the organic component. The conclusions drawn show that (i) it is possible to predict the rate of nitrosation of phenolics as a function of the meta-substituents on the phenol ring and (ii) the nitrosation of phenolics can be strongly inhibited by increasing the pH of the reaction medium as well as by lowering its dielectric constant. Received July 13, 2001. Accepted (revised) September 18, 2001