Transmission and small angle scattering of 15 MeV electrons in silicon single crystals

Abstract

A novel technique for the study of structural damage incurred by single crystal silicon targets during ion implantation is described. The method is based upon copper-decoration of the vacancy rich damaged region, followed by radiochemical measurement of the resulting copper distribution. Utilizing neutron activation, sharply peaked radiocopper profiles are obtained, which are believed to represent the depth distributions of large, relatively immobile defects such as vacancy clusters, voids, or crystalline faults. A more efficient decoration of isolated vacancy-type defects is realized when Wu is employed as a radioisotopic tracer in the decoration step, however, the rapid diffusivity of these smaller species leads to less sharply defined radiocopper profiles. Both the neutron activation and radiotracer modifications of the technique yield damage profiles which are significantly shallower than the corresponding implanted impurity profiles.     

Photothermally Induced Bistability of Emission of Yb-doped Ca4NdO(BO3)3 Single Crystals

We report on studies of changes in the emission spectra (excited at 808 nm) of the Yb-doped Ca₄NdO(BO₃)₃ single crystals due to the photothermal effects caused by the pulsed Nd:YAG laser. Increase of the sample's surface temperature after laser treatment leads to significant enhancement of the 1040 to 1060 nm emission (ascribed to the Nd^{3+ 4}F_3/2 → ⁴I_9/2, ⁴I_11/2 transitions) and simultaneous decrease of the 975 to 1050 nm emission (corresponding to the Yb^{3+ 2}F_5/2 → ²F_7/2 transition). We explain such an increase of the Nd³⁺ luminescence by thermally activated Yb³⁺ → Nd³⁺ energy transfer.     

Study of the d-f Emission,and f-d Ground-State and Excited-State Absorption of Nd3+ in Crystals Using the Simple Model

The simplified model for 4f-5d transitions is applied to obtain the line strengths for emission, ground-state absorption and excited states absorption involving 4f-5d transitions of Nd³⁺ in crystals. The results are host independent for the usual case where 5d crystal-field interaction can be considered as strong, in the sense that the calculated 5d-4f emission relative line strengths will be the same for Nd³⁺ in any host. Also the calculated 4f-5d absorption line strengths can be grouped by the 5d crystal-field components. For each 5d crystal-field component, the group of absorption line strengths for different 4f²5d transition final states forms a pattern independent of the 5d crystal-field component and the host. For practical cases, due to strong but still limited 5d crystal-field splitting, the transitions to different 5d crystal-field components may overlap each other. The theoretical results are used to interpret available experimental data.     

Preparation and Characterization of Electroactive Anion‐Exchange Acrylic Polymer–Gold Composites

The characteristics and performance of an ionic polymer–metal composite (IPMC), prepared with an anion‐exchange acrylic copolymer, was examined. The acrylic copolymer was synthesized by the radical copolymerization of fluoroalkyl methacrylate and 2‐(dimethyl amino)ethyl methacrylate(AMA). Effects of the AMA repeating unit's content in the copolymer and effects of the anion type present on the actuation of the IPMC were observed. The optimal content of 19.4 wt% AMA in the IPMC copolymer yielded the best actuation. The actuation also improved according to the type of anion present in the composite, in the following order: Br^???4 ^?.     

Influence of the surface morphology on the melting of polymer crystals. I. Loops of random length and adjacent reentry

A polymer crystal with a noncrystalline surface layer formed by chain loops of different lengths is considered. It is assumed that the length of each loop can be changed by longitudinal diffusion of the molecule through the crystal lattice. From the condition that the free energy of the system is minimum, the loop length distribution and the average loop length as function of temperature are calculated. In contrast to the results for loops of equal length, for the present model, a substantial thickness of the noncrystalline surface layer and a broad melting range is obtained also for the case of adjacent reentry. In order to get this result one has to take into account that even an “ideal fold” consists of at least four rigidly arranged CH2 groups in energetically unfavored conformation.     

Performance and Mechanism of Epoxy Resin for Reinforcement of Styrene–Butadiene Rubber

Styrene–butadiene rubber (SBR) vulcanizates reinforced by epoxy resin (EP) have been synthesized by an in-situ vulcanization and curing process. The influences of synthetic parameters, such as the contents of EP, carbon black, and types of compatilizers, on the microstructures, vulcanization, and mechanical properties of SBR have been investigated. It was found that EP in SBR exists in the form of a fibrillar interpenetrating network, which is important for the enhancement of mechanical properties of SBR. The experimental results showed that when the percentage of EP was in the range of 10–20%, the composite materials had the best comprehensive performance. In comparison with pure SBR, the tear strength and the tensile stress at 300% elongation of SBR-EP composite were increased significantly. The method can be applicable for other rubber vulcanizates to improve their mechanical properties.     

Vibration-rotation bands in ethane

The absorption spectrum of ethane was recorded at 0.014 cm^?1 resolution in the range 4500–6500 cm^?1 using a Fourier transform spectrometer and at room temperature. Eighteen bands could be identified and their type assigned. Upper state rotational constants are provided for the band at 5948.338 cm^?1 and Coriolis constants are obtained for most perpendicular bands. Vibrational assignments are suggested for the bands at 5948 cm^?1 (v7 + v10), 5914 cm^?1(v8 + v ₁₀+ v ₁₁), and 5852cm^?1 (v ₅+v ₁₀). All vibrational bands reported in the literature are gathered.     

Binding Study of Phenformin with Bovine Serum Album Using a Combined Technique of Equilibrium Dialysis with Flow-Injection Chemiluminescence Detection

ABSTRACT

The interaction between phenformin hydrochloride and bovine serum albumin (BSA) was investigated by the methods of chemiluminescence combined with equilibrium dialysis technique. A novel N-bromosuccinimide (NBS)–eosin Y (EY) chemiluminescence (CL) method was established for the determination of phenformin. The mechanism of this chemiluminescence system was proposed. Optimization studies were performed to determine the phenformin. Under the optimal conditions, the CL intensity was linear for a phenformin concentration over the range of 4.6 × 10^?8 to 5.0 × 10^?5 g/mL. The detection limit was 1.5 × 10^?8 g/mL. The data obtained by the present equilibrium dialysis–CL system were analyzed using the Klotz plot and the Scatchard analysis. The results showed that the Klotz plot and the Scatchard plot are linear with good correlation coefficient, indicating that the phenformin has only one type of binding site on BSA. The binding parameters were the number of the binding sites n (1.02) and the estimated association constant K (2.66 × 10⁴ L/mol). The chemiluminescence system combined with equilibrium dialysis developed in this work demonstrated its use for determination of interaction between drug and protein by using relatively simple instrument.     

Study on the Interaction Between Oxymatrine and Tungstosilicic Acid by Resonance Rayleigh Scattering and Its Analytical Applications

In the 0.1 mol · L^?1 hydrochloric acid solution, oxymatrine reacted with tungstosilicic acid to form a 2:1 ion-association complexes. This results in a great enhancement of resonance Rayleigh scattering. The maximum resonance Rayleigh scattering wavelength was located at 393 nm. Resonance Rayleigh scattering intensity was proportional to the concentration of oxymatrine in the range of 1.5–26.4 µg · mL^?1, and the detection limit (3σ) was 0.23 µg · mL^?1. The optimum conditions and the effects of coexisting substances on the reaction were investigated. The method shows a wide linear range and high sensitivity, and was applied to the determination of oxymatrine in marine capsules and human urine samples with satisfactory results. Therefore, a highly sensitive, simple, and quick method has been developed for the determination of oxymatrine.