全自动高温水解-离子色谱法测定氧化镧铈中氟、氯

为探究稀土氧化物中氟(F)和氯(Cl)元素含量的快速检测方法,通过全自动高温水解仪对氧化镧铈样品进行前处理,并利用氢氧根体系离子色谱仪检测吸收液中F-、Cl-离子的含量,建立了基于全自动高温水解-离子色谱法测定氧化镧铈中的F、Cl元素含量的快速检测方法,该方法有效避免了传统前处理方法过程复杂、分析时间慢、极易受人为干扰的问题。称取0.3g氧化镧铈样品,在氧气流量为300 mL/min,1100 ℃高温下水解燃烧20 min,吸收定容为体积20mL的吸收液,以NAOH(15mmol/L)作为淋洗液,经色谱柱分离,测得F-与Cl-在质量浓度为1.00 mg/L-15.00 mg/L范围内,质量浓度与离子色谱峰面积呈线性关系,相关系数均为0.9999。检出限分别为0.003mg/L和0.12mg/L。全自动高温水解仪联用离子色谱仪检测系统对氧化镧铈中F-的平均加标回收率测定结果为98.4%,标准偏差RSD为0.94%;对Cl-的加标回收率测定结果为97.8%,RSD为2.86%。说明该方法较高准确度及精密度,测试结果准确可靠满足企业和检测机构的测试需求,为稀土氧化中氟、氯元素含量的研究及相关产品的开发提供了理论基础。     

低温制备≥99.5%多晶氧化铝陶瓷

本文通过引入稀土氧化物Y2O3、Tm2O3为烧结助剂低温制备了氧化铝含量大于99.5;的多晶氧化铝陶瓷.实验表明:稀土氧化物的加入能够明显降低99.5;多晶氧化铝陶瓷的烧结温度,提高致密度.Y2O3、Tm2O3混合烧结助剂与单一稀土氧化物的烧结助剂相比能够明显抑制晶粒的生长,促进晶粒的均匀发育.当Y2O3+Tm2O3的含量为0.3;质量分数时,99.5;多晶氧化铝陶瓷的相对密度可达99.2;理论密度,抗弯强度为533MPa,显微硬度为17.2GPa.陶瓷断裂主要以穿晶断裂为主.     

Asymmetric conductivity of the Kondo effect in cold atomic systems

Motivated by recent theoretical and experimental advances in quantum simulations using alkaline earth(AE)atoms,we put forward a proposal to detect the Kondo physics in a cold atomic system.It has been demonstrated that the intrinsic spin-exchange interaction in AE atoms can be significantly enhanced near a confinement-induced resonance(CIR),which facilitates the simulation of Kondo physics.Since the Kondo effect appears only for antiferromagnetic coupling,we find that the conductivity of such system exhibits an asymmetry across a resonance of spin-exchange interaction.The asymmetric conductivity can serve as the smoking gun evidence for Kondo physics in the cold atom context.When an extra magnetic field ramps up,the spin-exchange process near Fermi surface is suppressed by Zee-man energy and the conductivity becomes more and more symmetric.Our results can be verified in the current experimental setup.     

水合硼酸锶的制备及脱水热分解动力学

以氯化锶和硼酸氢铵为原料,采用液相沉淀法制备了片状水合硼酸锶（SrB6O10•5H2O）粉体,并用XRD、FT-IR及SEM进行了表征。利用热重分析法对片状纳米硼酸锶粉体的脱水热分解动力学进行了研究,分别采用 Coats- Redfern 方程和 Flynn-Wall-Ozawa（FWO）法对热重分析数据进行了处理和拟合,初步确定了水合硼酸锶的四步脱水过程及相应的热分解反应机理,得到各步反应的表观活化能和指前因子。     

Über den Einfluß von Isotopieeffekten auf die Verbreitung der Isotope in der Natur

Die Isotopenzusammensetzung der chemischen Elemente in ihren natürlichen Vorkommen wird von kernphysikalischen Vorgängen, vom Einfall extraterrestrischer Materie und, namentlich bei den leichten Elementen (etwa bis zum Chlor), von kinetischen und thermodynamischen Isotopieeffekten beeinfluβt. Deshalb ist die Kenntnis der in der Natur wirkenden Isotopieeffekte eine entscheidende Voraussetzung für das Verständnis der Gesetzmäβigkeiten der Verbreitung der Isotope in der Natur und für die Anwendung dieser Gesetzmäβigkeiten als Mittel der geo- und kosmoswissenschaftlichen Forschung und der Umweltforschung [1].     

A model of melting of rare gases within bubbles of crystalline metal matrix

Abstract

On the basis of experimental results obtained in the present and some other works a model of melting of rare gas solids within bubbles formed in a crystalline metal matrix as a result of ion implantation is proposed. Rare gas solid is supposed to melt on heating at the expense of the bubble volume expansion by emission of a dislocation loop. On this basis the melting temperature can be estimated as one which is enough to provide for a pressure inside a bubble sufficient for the initiation of the dislocation loop punching. Values of melting temperatures obtained in this way are in good agreement with available experimental data.     

SPECTROPHOTOMETRIC STUDY OF COMPLEX FORMATION BETWEEN SOME ALKALI AND ALKALINE EARTH CATIONS AND SEVERAL CONVENTIONAL (N,N), (N,O) AND (O,O) LIGANDS IN 95% ETHANOL

Abstract

The complexation of Li⁺, Na⁺, Mg²⁺ and Ca²⁺ with 1,10-phenanthroline, 2,2′-bipyridine, 1,2-phenylenediamine, 2-aminopyridine, 8-hydroxyquinoline, catechol and ethylene glycol was studied in 95% ethanol by means of a competitive spectrophotometric method using murexide as indicator. Formation constants of 1:1 conplexes were determined. In the case of all ligands used, the stability of the complexes was found to vary in the order Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺. It was found that the structure influences the formation and stability of resulting complexes. Effects of various parameters on complexation are discussed.     

A new stable porous Pr-organic framework constructed by multi-iodine-substituted aromatic polycarboxylates: Synthesis,characterization, and selective adsorption of dyes

abstract

Poly[tris(dimethylformamide)(μ3-2,4,6-triiodol-1,3,5-benzene tricarboxylic acid)-praseodymium (III)] {Pr(TIBTC)(DMF)₃}_n (1) (H₃TIBTC = 2,4,6-triiodo-1,3,5-benzene tricarboxylic acid) was synthesized by the reaction of Pr(NO₃)₃·6H₂O and H₃TIBTC at 85°C in a pyrex vial. 1 was characterized by elemental analysis, IR, UV–vis, TGA, PXRD, and atomic force microscopy analytical means. Each of the central Pr ions and the three carboxyl groups from the same ligand constitute a SBU, which is then joined by a carboxyl group to form a building block. In order to further explore the functional properties of 1, we used this compound for adsorption experiments. It is found that 1 can effectively adsorb anionic dyes in aqueous solutions. In particular, there is a good adsorption efficiency for coomassie brilliant blue R-250. Therefore, 1 shows good prospects for selective adsorption of anionic dyes from wastewater solution.     

Light Emitting Diodes Prepared from Terbium‐Immobilized Polyurea Chelates

Abstract

This article describes the synthesis and application of poly(1,4‐phenylene‐2,6‐pyridylurea) (MCPU) as a charge transporting and rare earth metal chelating host matrix for organic light emitting diodes (OLEDs). The chelation between MCPU and Terbium (Tb³⁺) (the rare earth metal used in this study), is facile in nature and persists in thin films obtained by spin coating onto various substrates. Multiple polymer chelating moieties at each Tb ion site may derive from MCPU repeat units from a single polymer chain or two polymer chains, and their respective structures are proposed. The emissive properties of these films in the presence and absence of Terbium (Tb³⁺) were characterized by steady state UV‐VIS absorption spectroscopy and photoluminescence (PL) spectroscopy. The PL emission from Tb(MCPU) films indicate contribution from both the host MCPU and the Tb ions. The incorporation of these films in OLEDs employing different device architectures yields electroluminescence spectra, which show the characteristic emission of the Tb ions but no emission from the host polymer matrix. Although these devices are not optimized, they exhibit an order of magnitude higher external quantum efficiency as compared to that of conventional aluminum tris 8‐hydroxyquinoline (Alq₃) based OLEDs, at low current densities.