用GGA+U法研究稀土掺杂对ZnO电子结构磁性和光学性质的影响

基于自旋密度泛函理论框架下的广义梯度近似平面波模守恒赝势方法,确定了准确计算Zn_(16)O_(16)超晶胞各原子对应的U值;通过计算形成能和化学键的布局分析了掺杂结构的稳定性;通过原子电荷布局和自旋电子态密度的计算分析了掺杂结构的能带结构和磁性状态;讨论了各稀土原子掺杂对ZnO吸收光谱的影响.结果表明:稀土元素的引入使晶格膨胀,Zn-O键最长键增大而最小键减小,导致氧四面体畸变;Y/La/Ce掺杂的ZnO具有亚铁磁性,Th掺杂ZnO则呈弱铁磁性,Ac掺杂ZnO为顺磁体;稀土元素使ZnO的价带和导带下移,费米能级进入导带,增强了体系的电导率;Y/La/Ac掺杂对ZnO带隙宽度的影响较小,吸收光谱略微蓝移,而Ce/Th掺杂则有效提升了ZnO对可见光的吸收.     

Magnetic properties of stuffed copper chromium tellurides Cu1+xCr2+yTe4 (x=0-1, y<0.3)

We present a detail study of the effect of excess metal atoms on the magnetic properties of Cu_1+xCr_2+yTe₄ at 2-400 K. With the increase in x=0-1 and y<0.3, these compounds retain metallic behavior, while ferromagnetic ordering temperature reduces from 325 to 160 K. Our low field susceptibility χ_ac measurements reveal a second transition on cooling below the ferromagnetic ordering; the transition at around 160-180 K intensifies with the excess amount of copper and chromium atoms. The value of spontaneous magnetization at 2 K remains between 2.6 and 2.9μ_B across all the compositions and it reduces with temperature as M(T)∼A₀T^3/2+A₁T^5/2, as expected for the excitation of Bloch's spin waves in a model of the Heisenberg ferromagnet. Our terminal composition Cu_1.9Cr_2.25Te₄ showed only second transition at 160 K with short range magnetic order much above the transition temperature and in the absence of the specific heat jump at this temperature. The magnetic properties are explained as a result of random magnetic anisotropy in the excess-metal compositions induced by the interstitial atomic defects in their parent spinel structure. The large stuffing of cations has been made possible in the telluride compounds because of the large size of tellurium and also by the covalent bonding that stabilizes the defect structure.     

Ce-EU-1分子筛的合成和表征

采用水热法,以溴化六甲双铵（HMBr2）为模板剂,硅溶胶、偏铝酸钠为硅铝源,以六水硝酸铈为铈源合成了稀土Ce-EU-1分子筛,并通过XRD、FTIR、紫外-可见漫反射光谱、热重分析（TG-DTG）和氮气吸附-脱附等测试手段对合成样品的孔道结构、物化性能及Ce的存在状态进行了表征。XRD结果表明,合成样品不仅具有很高的纯度和结晶度,为典型的立方有序排列的EU-1结构,而且部分Ce已取代Si或Al进入微孔分子筛的骨架。样品的FTIR图谱在980cm-1附近有明显的Si—O—Ce特征吸收峰,证明Ce存在于分子筛的骨架中。紫外-可见漫反射图谱显示,在253nm附近出现O—Ce之间的电子跃迁特征峰,进一步证明了Ce进入了分子筛骨架。氮气吸附-脱附结果表明了Ce的掺入对分子筛的物化性能和孔道结构产生了影响。同时考察了镧系其他金属离子（Ln：La、Nd、Sm和Gd）对EU-1分子筛的影响,发现随着镧系离子半径的减小,Ln-EU-1分子筛的相对结晶度逐渐降低,晶胞体积减小。     

Rapid synthesis and luminescence of the Eu, Er codoped ZnO quantum-dot chain via chemical precipitation method

ZnO quantum-dot chains codoped with Eu³⁺ and Er³⁺ were synthesized by the chemical precipitation method and the codoping effects on the structures, morphologies and optical properties of the powders were briefly investigated. The X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS) results indicated the Eu³⁺ and Er³⁺ were incorporated into the crystal lattice of ZnO host. Transmission electron microscope (TEM) measurements showed the sizes of the ZnO quantum dots decreased with the increase of Eu³⁺ and Er³⁺ doping concentration, and the quantum-dot chains were formed by codoping with Eu³⁺ and Er³⁺. The green emissions in the photoluminescence spectra were attributed to 4f-4f of Er³⁺ inner shell ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transitions, and the characteristic red emissions of Eu³⁺ ions were attributed to the ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transitions, respectively. Moreover, the red emission of the Eu³⁺ ions gradually decreased with the Er³⁺ ions doping concentration increased, which may be due to the different energy storage centers in the powders.     

高纯氧化钇中镧、铈、钐、铝、铅和铜的电感耦合等离子体原子发射光谱法测定

本文以纯Y_2O_3中杂质元素的ICP-AES测定为例,研究用数值微分技术解决光谱干扰同题。结果表明,导数光谱法不仅可以有效地消除来自基体的光谱干扰,还能减小谱线干扰对检测能力的影响。当分析物浓度较低时,导数光谱法的加入回收率明显优于离峰分析法,多数情况下也优于在峰法校正光谱干扰时的回收率。     

稀土元素的X射线荧光光谱分析

近十年来,国内外的稀土元素X射线荧光光谱分析工作有了很大进展。随着稀土应用的日益广泛,XRF不仅是常量稀土分析手段,也已用于微量和痕量稀土分析。本文着重在样品的预富集,制样技术,仪器条件,校正谱线干扰以及消除基体效应的数学校正法等方面做了阐述。     

高纯金属镨中痕量稀土杂质的电感耦合等离子体原子发射光谱分析及光谱干扰的校正

本文提出了PGS-2型平面光栅光谱仪(色散率0.18纳米,二级光谱)与PlasmaTherm ICP-5000D射频发生器联用,乙醇预去溶方式进样,同时直接测定高纯金属镨中5个痕量稀土杂质元素的方法。并讨论了基体浓度对检出限的影响以及光谱干扰及其校正方法。当样品溶液中镨的浓度为5毫克/毫升时,测定下限分别为镧、钕和钐0.002%,铈0.003%和钇0.0005%。获得了良好的实验结果,其相对标准偏差为1.2-6.2%。     

高纯氧化镨样品ICP摄谱分析时光谱干扰校正方法的研究

本文提出了Pr_6O_(11)样品ICP摄谱分析时干扰系数法校正光谱干扰的方法和相应的计算机软件系统。建立了Pr基体对14种稀土杂质元素24条灵敏分析线的干扰系数表(KCT),利用所提出的方法分析了Pr_6O_(11)合成样品,由91个实验点所得回收结果可知,回收率在90～110%之间的占93.4%。可见校正是相当有效和十分必要的。     

电感耦合等离子体发射光谱法测定铝合金中La、Ce、Pr、Nd、Sm

利用ICP—AES仪测定稀土铝合金中微量的La、Ce、Pr、Nd、Sm。试样用酸分解,直接上机测定,对光谱干扰情况和仪器参数的选择进行了研究。实验结果和推荐值核对相符。