Experimental and theoretical study of radon levels and entry mechanisms in a mediterranean climate house

An experimental study has been carried out in an inhabited single-family house. Radon concentration in the different rooms of the house and in its garden soil has been measured with Nuclear Track Detectors. No high differences of radon concentration have been observed between the different rooms of the house, so that the proximity of the room level to the soil seems not to affect the radon concentration. The annual radon concentration obtained indoors and in the soil has been respectively 35 Bq m⁻³ and 24 kBq m⁻³. Since radon generation in the source, entry into indoor air and accumulation indoors depend on several parameters, the effect of a specific parameter on indoor radon concentration is difficult to explain from the radon measurements only. The RAGENA (RAdon Generation, ENtry and Accumulation indoors) model has been adapted to the room in the basement of the house. The mean radon concentration values obtained with the model are compared to experimental results derived from measurements using Nuclear Track Detectors. The use of the model, together with the experimental study, has allowed characterising radon sources, levels and entry mechanisms in the house. The concrete walls have been found to be the most relevant radon source, while the contribution of the soil is negligible in this case. The indoor radon level is given by the balance of the permanent exhalation from concrete and the removal due to ventilation. The indoor radon levels are close to the average value for the Barcelona area which, in turn, is close to the world averaged value.     

On the shape–from–moments problem and recovering edges from noisy Radon data

We consider the problem of reconstructing a planar convex set from noisy observations of its moments. An estimation method based on pointwise recovering of the support function of the set is developed. We study intrinsic accuracy limitations in the shape–from–moments estimation problem by establishing a lower bound on the rate of convergence of the mean squared error. It is shown that the proposed estimator is near–optimal in the sense of the order. An application to tomographic reconstruction is discussed, and it is indicated how the proposed estimation method can be used for recovering edges from noisy Radon data.Mathematics Subject Classification (2000):62C20, 62G20, 94A12     

Soil radon response around an active volcano

Soil radon behavior related to the volcanic eruptive period 1997–1999 of Popocatepetl volcano has been studied as a function of the volcanic activity. Since the volcano is located 60 km from Mexico City, the risk associated with an explosive eruptive phase is high and an intense surveillance program has been implemented. Previous studies in this particular volcano showed soil radon pulses preceding the initial phase of the eruption. The radon survey was performed with LR-115 track detectors at a shallow depth and the effect of the soil moisture during the rainy season has been observed on the detectors response. In the present state of the volcanic activity the soil radon behavior has shown more stability than in previous eruptive stages.     

Exhalation rate study of radon/thoron in some building materials

Indoor radon/thoron have been recognised as one of the health hazards for mankind. Common building materials used for construction of houses, which are considered as major sources of these gases in indoor environment, have been studied for exhalation rate of radon/thoron. ‘Can’ technique using plastic track detector LR-115 type-II has been used for measurement. Exhalation rates for radon and thoron have been found to be varying from a minimum value of 0.024 and 29.4 Bqm⁻² h⁻¹ for cement plastered brick to a maximum value of 0.16 and 692.2 Bqm⁻² h⁻¹ for unfired brick, respectively. Exhalation rate for thoron has been found to be several times higher than that for radon. Measured exhalation rates for thoron indicate significant presence of thoron in indoor environment which is also supported by indoor measurements of thoron and its progeny.     

Influences on indoor radon concentrations in Riyadh,Saudi Arabia

The influences on indoor radon concentrations in Riyadh, Saudi Arabia survey was carried out for 786 dwellings. The measurements were obtained by using a passive integrating ionization system with an E-Perm^® Electret ion chamber. Radon levels ranged from 1 to 195 Bq m⁻³, with a mean value of 24.68 Bq m⁻³, the geometric mean and the geometric standard deviation are 21 and 2 respectively. 98.5% of the results were below the action level recommended by WHO of 100 Bq.m⁻³. The results were found to vary substantially due to types of houses and rooms, ventilation, seasons and building materials. Radon concentrations were higher in houses with no ventilation systems, and central air conditioners, and were relatively lower in well ventilated houses with red bricks and water air conditioners.     

A simple model for automatically measuring radon exhalation rate from medium surface

A simple model to measure radon exhalation rate from medium surface is developed in this paper. This model is based on a combination of the “accumulation chamber” technique and a radon monitor. The radon monitor is used to perform measurement of radon concentration evolution inside the accumulation chamber, and radon exhalation rate is evaluated via nonlinear least-square fitting of the measured data. If the flow rate of the pump is high enough, radon concentration in the detector's internal cell becomes to be equal to that in the accumulation chamber quickly, and the simple model for measuring the radon exhalation rate can be generated analytically. Generally, the pump flow rate of radon monitor is low, not satisfying the condition. We find other sufficient conditions of this simplified model. On these conditions, the radon exhalation rate can be calculated accurately through this model even the flow rate of the pump is not so high. This method can be applied to develop and improve the instruments for measuring the radon exhalation rate.     

Wavelet transform and radon transform on the quaternion Heisenberg group

Let Q be the quaternion Heisenberg group,and let P be the affine automorphism group of Q.We develop the theory of continuous wavelet transform on the quaternion Heisenberg group via the unitary representations of P on L2(Q).A class of radial wavelets is constructed.The inverse wavelet transform is simplified by using radial wavelets.Then we investigate the Radon transform on Q.A Semyanistyi–Lizorkin space is introduced,on which the Radon transform is a bijection.We deal with the Radon transform on Q both by the Euclidean Fourier transform and the group Fourier transform.These two treatments are essentially equivalent.We also give an inversion formula by using wavelets,which does not require the smoothness of functions if the wavelet is smooth.In addition,we obtain an inversion formula of the Radon transform associated with the sub-Laplacian on Q.