Temperature-response polymer coating for in-tube solid-phase microextraction coupled to high-performance liquid chromatography

The silica nanoparticle (SiO₂ NP)-deposited capillary fabricated by liquid phase deposition (LPD) was bonded by 3-(triethoxysilyl) propyl methacrylate and then modified with poly(N-isopropylacrylamide) (PNIPAAm) by polymerization. The resulting PNIPAAm modified SiO₂ NP-deposited capillary was applied to in-tube solid-phase microextraction coupled to high-performance liquid chromatography (in-tube SPME-HPLC). To investigate the extraction performance of the prepared capillary, diethylstilbestrol (DES) with moderate polarity was selected as the model analyte. Results demonstrate that PNIPAAm modified SiO₂ NP-deposited capillary exhibited obvious temperature responsive character. Finally, the PNIPAAm modified SiO₂ NP-deposited capillary was applied to the analysis of three synthetical estrogens from milk samples. The detection limit of the method was found to be in the range 1.2-2.2 ng/g, and recovery was 71.7-98.9% with relative standard deviations in the range of 2.8-12.6%.     

Enrichment of neonicotinoid insecticides from lemon juice sample with magnetic three‐dimensional graphene as the adsorbent followed by determination with high‐performance liquid chromatography

A novel 3D‐graphene (3D‐G) magnetic nanomaterial was prepared and used as an adsorbent for the extraction of four neonicotinoid insecticides (acetamiprid, imidacloprid, thiacloprid, and thiamethoxam) from lemon juice sample. Then, HPLC with UV detection was applied for the determination of the neonicotinoid insecticides desorbed from the 3D‐G magnetic nanomaterial. The main experimental parameters that affect the extraction efficiencies such as the amount of 3D‐G magnetic nanomaterial, sample solution pH, extraction time, salting‐out effect, and desorption conditions were studied and optimized. As a result, the linear concentration range of the method was from 0.3 to 100.0 ng/mL for thiacloprid, from 0.5 to 100.0 ng/mL for imidacloprid and acetamiprid, and from 1.0 to 100.0 ng/mL for thiamethoxam, with correlation coefficients of 0.9965–0.9985, respectively. The LODs of the method based on an S/N of 3 were between 0.08 and 0.2 ng/mL. The enrichment factors obtained were between 67 and 427, and the RSDs (n = 6) were in the range from 4.6 to 7.1%, and the recoveries of the method fell in the range of 88.75 to 111.60%.     

Synthesis and application of molecularly imprinted nanoparticles combined ultrasonic assisted for highly selective solid phase extraction trace amount of celecoxib from human plasma samples using design expert (DXB) software

In this work molecular imprinted nanoparticles (MINPs) was synthesized and applied for ultrasonic assisted solid phase extraction of celecoxib (CEL) from human plasma sample following its combination by HPLC–UV. The MINPs were prepared in a non-covalent approach using methacrylic acid as monomer, CEL as template, ethylene glycol dimethacrylate as cross-linker, and 2,2-azobisisobutyronitrile (AIBN) as the initiator of polymerization. pH, volume of rinsing and eluent solvent and amount of sorbent influence on response were investigated using factorial experimental design, while optimum point was achieved and set as 250 mg sorbent, pH 7.0, 1.5 mL washing solvent and 2 mL eluent by analysis of results according to design expert (DX) software. At above specified conditions, CEL in human plasma with complicated matrices with acceptable high recoveries (96%) and RSD% lower than 10% was quantified and estimated.The proposed MISPE-HPLC–UV method has linear responses among peak area and concentrations of CEL in the range of 0.2–2000 μg L⁻¹, with regression coefficient of 0.98. The limit of detection (LOD) and quantification (LOQ) based on three and ten times of the noise of HPLC peaks correspond to blank solution were 0.08 and 0.18 μg L⁻¹, respectively.     

Synthesis of betulin derivatives and the determination of their relative lipophilicities using reversed‐phase thin‐layer chromatography

A series of superlipophilic or highly lipophilic semisynthetic betulin derivatives was prepared and their relative lipophilicity was measured by reversed‐phase thin‐layer chromatography (RP‐TLC) at different pH values using 1,4‐dioxane–acetate buffer mixtures as mobile phases. Cholesterol, 17β‐estradiol and pure betulin were used as the reference compounds. Linear relationships were found between R_M values and 1,4‐dioxane concentrations in the mobile phases. LogP values were also calculated with computer programs ACD/LogP (ChemSketch 11.0, Advanced Chemistry Development Inc.) and ClogP (Daylight Chemical Information Systems Inc.). The empirical and theoretical data were compared, and the R_M0 values correlated well with logP. Two of the synthesized betulin derivatives are reported for the first time. Copyright © 2009 John Wiley & Sons, Ltd.     

降血糖新药格列美脲的HPLC含量测定法

采用ZORBAX—C18色谱柱(4.6 mm×150 mm,5μm),以甲醇-0.03 mol/L磷酸二氢胺水溶液(70:30,用磷酸调节缓冲盐水溶液的pH为3.5)作为流动相,流速1.0 mL/min;紫外检测波长为230 nm.用安定做为内标测定格列美脲(glimepiride,GMD)原药的含量.此方法对格列美脲的线性范围是10μg/mL～200 μg/mL,相关系数r>0.999 9;最低检测限为1.2 ng;平均回收率为99.39％～100.34％.RSD是0.33％～0.37％.结果表明用反相HPLC测定格列美脲原药含量操作简便,结果准确.     

Differences in porous characteristics of styrenic monoliths prepared by controlled thermal polymerization in molds of varying dimensions

Nitroxide‐mediated polymerization was used as a model system for preparing styrenic monolithic materials with significant mesopore contents in different mold formats, with the aim of assessing the validity of pore characterization of capillary monoliths by analysis of parallel bulk polymerized precursor solution. Capillary monoliths were prepared in 250 μm id fused silica tubes (quadruplicate samples, in total 17 m), and the batch polymerizations were carried out in parallel in 100 μL microvials and regular 2 mL glass vials, both in quintuplicate. The monoliths recovered from the molds were characterized for their meso‐ and macroporous properties by nitrogen sorptiometry (three repeated runs on each sample), followed by a single analysis by mercury intrusion porosimetry. A total of 14 monolith samples were thus analyzed. A Grubbs' test identified one regular vial sample as an outlier in the sorptiometric surface area measurements, and data from this sample were consequently excluded from the pore size calculations, which are based on the same nitrogen sorption data, and also from the mercury intrusion data set. The remaining data were subjected to single factor analyses of variance analyses to test if the porous properties of the capillary monoliths were different from those of the bulk monoliths prepared in parallel. Significant differences were found between all three formats both in their meso‐ and macroporous properties. When the dimension was shrunk from conventional vial to capillary size, the specific surface area decreased from 52.2±4.7 to 34.6±1.7 m²/g. This decrease in specific surface area was accompanied by a significant shift in median diameter of the through‐pores, from 310±3.9 to 544±13 nm. None of these differences were obvious from the scanning electron micrographs that were acquired for each sample type. The common practice of determining the mesopore characteristics from analysis of samples prepared by parallel bulk polymerization and looking for changes in the macropore structure by visual assessment of SEMs are therefore both rather questionable, at least for monoliths of the kind used in this study.     

HPLC–PDA identification and resolution of rufinamide forced degradation impurities: A congregated chemometric expedite optimization coupled with factorials and desirability

Rufinamide is used presently to treat Lenaux–Gastaut syndrome. A full factorial design and desirability approach was investigated for the optimization of hydrolytic stress via response surface curves (RSCs). The degradation impurities were identified and resolved using reversed-phase high-performance liquid chromatography (RP-HPLC) on the Qualisil® BDS C₈ column. Acetonitrile–water (29:71, v/v) was optimized for the mobile phase and used at a flow rate of 1.0 ml/min with detection at a wavelength of 230 nm. Rufinamide showed appreciable susceptibility to hydrolysis under acidic and alkaline stress, and substantial degradation in the neutral condition. It degraded much less under oxidative stress. Exposure towards thermal and photolytic stress conditions indicated appreciable stability. The developed method was subjected to validation as per the recommendations of the International Conference on Harmonization. The proposed method showed no influence from the excipients and the degradation products. As well as good precision and accuracy in determination, the method showed a linear response between 2 and 12 μg ml⁻¹. The method was extended for determination in a human plasma sample, which resulted in excellent recovery without interference from matrix effects. The combined use of desirability and design for the optimization of acidic and alkaline hydrolytic stress led to simple and rapid analysis.     

Ensuring robustness in the quality of antibiotic susceptibility test discs for four novel antibiotics

Antibiotic susceptibility test (AST) discs are used as an in-vitro diagnostic tool to select the appropriate antibiotic to treat an infection. Generally, the concentration of the drug loaded on to the AST discs is measured by studying its activity against quality control organisms. This methodology has several limitations—it is time consuming, requires trained manpower, has a wider acceptance criteria of zone of inhibitions—causing ambiguity in judging smaller variations in drug concentration. To overcome these issues, we have developed and validated high-performance liquid chromatographic (HPLC) methods for the determination of strength of AST discs for in-house researched antibiotics, namely Levonadifloxacin/WCK 771, Nafithromycin/WCK 4873, Cefepime-Tazobactam/WCK 4282, and Cefepime-Zidebactam/WCK 5222. The drugs were extracted from the AST discs using an appropriate solvent. The developed methods are simple, accurate, precise, reproducible, rugged, and robust. They are efficient in terms of time, and can be easily conducted in a quality control laboratory during release as well as stability evaluation of AST disc. Application of HPLC methods for the determination of strength of AST discs ensures flawless quality and, consequently, a better selection of drugs to treat bacterial infections in clinics.     

A gadolinium-based magnetic ionic liquid for supramolecular dispersive liquid–liquid microextraction followed by HPLC/UV for the determination of favipiravir in human plasma

Favipiravir is a potential antiviral medication that has been recently licensed for Covid-19 treatment. In this work, a gadolinium-based magnetic ionic liquid was prepared and used as an extractant in dispersive liquid–liquid microextraction (DLLME) of favipiravir in human plasma. The high enriching ability of DLLME allowed the determination of favipiravir in real samples using HPLC/UV with sufficient sensitivity. The effects of several variables on extraction efficiency were investigated, including type of extractant, amount of extractant, type of disperser and disperser volume. The maximum enrichment was attained using 50 mg of the Gd-magnetic ionic liquid (MIL) and 150 μl of tetrahydrofuran. The Gd-based MIL could form a supramolecular assembly in the presence of tetrahydrofuran, which enhanced the extraction efficiency of favipiravir. The developed method was validated according to US Food and Drug Administration bioanalytical method validation guidelines. The coefficient of determination was 0.9999, for a linear concentration range of 25 to 1.0 × 10⁵ ng/ml. The percentage recovery (accuracy) varied from 99.83 to 104.2%, with RSD values (precision) ranging from 4.07 to 11.84%. The total extraction time was about 12 min and the HPLC analysis time was 5 min. The method was simple, selective and sensitive for the determination of favipiravir in real human plasma.     

Bioactive constituents of Iris hybrida (Iridaceae): Processing effect

Iris genus plants are a valuable source of bioactive compounds, which are an important component for pharmaceutical development. The present article shows the potential for mineral nutrition with application of magnesium sulfate, iron chelates and potassium oxide affecting the phenolic compound contents in Iris hybrida ‘Tsikavynka’, I. hybrida ‘Tambo’ and I. hybridа ‘Widecombe Fire’. The effect of mineral processing was specific to plant organs and varied in the component composition. The Iris rhizomes had an increased total phenolic compound content after treatment (up to 10% of the total isoflavonoid content, up to 8% of phenolic acids, up to 5% of γ-pyrones and up to 13% of flavonoids), determined using UV–vis spectroscopy. A positive effect of nutrition on the biosynthesis and content of individual isoflavonoids (tectoridin, nigricin d -glucoside, genistin, iristectorigenin B, nigricin, irigenin and irisolidone) and xanthone mangiferin in Iris rhizomes by HPLC was established. In addition, an increase in the chlorogenic acid amount in Iris leaves was noted. The results demonstrate the sensitivity of Iris phenylpropanoid metabolism to mineral nutrition and can be used to predict medical plant cultivation with increased content of bioactive constituents.