Molecular Weight Control via Cross Metathesis in Photo-Redox Mediated Ring-Opening Metathesis Polymerization

Photo-redox mediated ring-opening metathesis polymerization (photo-ROMP) is an emerging ROMP technique that uses an organic redox mediator and a vinyl ether initiator, in contrast to metal-based initiators traditionally used in ROMP. The reversibility of the redox-mediated initiation and propagation steps enable spatiotemporal control over the polymerization. Herein, we explore a simple, inexpensive means of controlling molecular weight, using alpha olefins as chain transfer agents. This method enables access to low molecular weight oligomers, and molecular weights between 1 and 30 kDa can be targeted simply by altering the stoichiometry of the reaction. This method of molecular weight control was then used to synthesize a functionalized norbornene copolymer in a range of molecular weights for specific materials applications.     

All-cis poly(p-phenylene vinylene)s with high molar masses and fast photoisomerization rates obtained through stereoretentive ring-opening metathesis polymerization of [2,2]paracyclophane dienes with various aryl substituents

Poly(p-phenylene vinylene)s (PPVs) are some of the most widely studied conjugated polymers in academia and industry, but most production methods lack precise control over molar masses and alkene stereochemistry. These critical parameters have a large influence on processability, polymer morphology, and optical properties. Herein, we report the stereoretentive ring-opening metathesis polymerization (ROMP) of [2.2]paracyclophane dienes bearing either a linear alkyl substituent or a branched alkoxy substituent to form all-cis PPVs with great solubility in organic solvents. The introduction of 2-ethylhexyloxy side-chains permits the preparation of PPV with uncharacteristically high molar masses (up to 108.8 kg/mol) for a polymerization with living characteristics. Exposure to UV light (365 nm) rapidly induces isomerization of all-cis alkenes leading to the formation of all-trans PPV. This study proposes an attractive strategy to synthesize soluble all-cis and all-trans PPVs with tunable, high molar masses through careful design of the ROMP monomer.     

Synthesis of cyclic olefin polymers with high glass transition temperature by ring‐opening metathesis copolymerization and subsequent hydrogenation

Novel cyclic olefin polymers (COPs) derived from bulky cyclic olefin, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1′,2′)‐benzeno‐l,4‐methanoanthracene (HBMN), with high glass transition temperature (T_g), excellent thermal stability, high transparency, and improved mechanical performance, have been achieved by ring‐opening metathesis polymerization and subsequent hydrogenation. The “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh) (Cy = cyclohexyl) ( G1 ), displays very high activity for homo/copolymerization with complete conversion. Homopolymer of the HBMN after complete hydrogenation showed a highest T_g of 223.6 °C. Copolymerization of HBMN with tricyclo[4.3.0.12,5]deca‐3‐ene or 5‐n‐hexylnorbornene was also carried out. These two series of COPs were characterized by gel permeation chromatography, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. The T_g of the resulted COPs linearly increased with HBMN content, which is easily controlled by changing feed ratios. The tensile test indicates that these copolymers have good mechanical performance as all these copolymers show a higher strain at break compared with commercial products (TOPAS^®). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2654‐2661     

Synthesis of POSS‐terminated polycyclooctadiene telechelics via ring‐opening metathesis polymerization

In this contribution, we reported the synthesis of a series of POSS‐terminated polycyclooctadiene (PCOD) telechelics via ring‐opening metathesis polymerization (ROMP) approach. Toward this end, 1,4‐diPOSS‐but‐2‐ene was synthesized via copper‐catalyzed Huisgen cycloaddition reaction (i.e., click chemistry); it was then used as a chain transfer agent (CTA) for the ROMP of cyclooctadiene. The ROMP was carried out with Grubbs second generation catalyst and the POSS‐terminated PCOD telechelics with variable lengths of PCOD were obtained by controlling the molar ratios of CTA to cyclooctadiene. All the POSS‐terminated PCOD telechelics in bulks were microphase‐separated; the morphologies were quite dependent on the lengths of PCOD midchains. The POSS end groups can promote the crystallization of PCOD chains at room temperature, which was in marked contrast to the case of plain PCOD. Compared to the plain PCOD, the POSS‐terminated PCOD telechelics displayed improved thermal stability and surface hydrophobicity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 223–233     

Impact of poly(ɛ‐caprolactone) architecture on the thermomechanical and shape memory properties

We report the synthesis of linear‐ and brush‐type poly(?‐caprolactone) (PCL) networks and investigate their thermal, mechanical, and shape memory behavior. Brush‐PCLs are prepared by ring‐opening metathesis polymerization (ROMP) of a norbornenyl‐functionalized ?‐caprolactone macromonomer (MM‐PCL) of different molecular weights. The linear analog, diacrylate end‐functionalized PCL (linear‐PCL), having comparable molecular weight of side chain of brush‐PCL is also synthesized. These polymers are thermally cured by a radical initiator in the presence of poly(ethylene glycol) diacrylate crosslinker. Thermal and linear viscoelastic properties as well as shape memory performance of the resulting PCL networks are investigated, and are significantly impacted by the PCL architecture. Therefore, our work highlights that tailoring macromolecular architecture is useful strategy to manipulate thermal, mechanical, and resulting shape memory properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3424–3433     

Telechelic polynorbornenes with hydrogen bonding moieties by direct end capping of living chains

We present two novel symmetric olefins bearing hydrogen bonding moieties for the direct capping of living ring opening metathesis polymerization‐chains using Grubbs catalyst 1st‐ and 3rd‐generation. The symmetric olefins are generated via homo metathesis of the corresponding α‐olefins under aid of microwave irradiation and are used to prepare polynorbornene‐chains (M_n = 4,000–10,000 g/mol, M_w/M_n = 1.1–1.4) bearing barbiturate and thymine‐moieties. A qualitative and quantitative analysis of the generated polymers is done via MALDI‐TOF MS proving the introduction of hydrogen‐bonding moieties into the polymer chain and revealing the strong dependence of the desorption on the chemical structure of the different polymer species and high efficiencies for the end group introduction (90–99%). The efficiency of this process depends strongly on the reaction time and the equivalents of terminating agent with respect to the living end. The best results for the end group introduction are achieved by reacting the living chains with an excess of the terminating agent (5–20 equiv) for 100 h. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Poly(terthiophene)s from copolymer precursors via solid‐state oxidative conversion

Herein, we report the synthesis of conducting poly (terthiophene)s using a side chain precursor polymer approach. Random copolymers were prepared by ring opening metathesis polymerization of two norbornylene monomers, one containing a pendant terthiophene group and the other containing a pendant acetate group. Solid‐state oxidative conversion of the terthiophene units was used to produce conductive polymers. Oxidative solid‐state conversion was successful for copolymers containing as little as 1 mol % of terthiophene comonomer. The electrical and optical properties of CPs were studied as a function of the amount of electroactive moiety, terthiophene (3T), present in the copolymer. The CPs were found to have conductivity varying between 10^?1 and 10^?4 S/cm depending on the precursor copolymer compositions. The CPs obtained from all precursors had no significant difference in their energy gaps and showed blue to orange color transitions when switching from the oxidized to the neutral states, respectively. The absorbance intensity at 426 nm for poly(3T) from the precursors fits the Beer–Lambert law corresponding to the range of initial 3T content in the precursor copolymer composition (from 1 to 100 mol %). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 756–763, 2010     

Contact bactericides and fungicides on the basis of amino‐functionalized poly(norbornene)s

This study is aimed at investigating the microbiocidal potential of amino‐functionalized poly(norbornenes) in the solid state. A series of norbornene‐type monomers that carry secondary or tertiary amine functions as well as hexyl and dodecyl groups were prepared. Ring‐opening metathesis polymerization was used to prepare homopolymers of the amine bearing monomers and random copolymers of amine‐ and alkyl‐substituted monomers of high average molar mass. The resulting polymers were characterized by nuclear magnetic resonance, thermogravimetry, differential scanning calorimetry, infrared spectroscopy, and contact angle measurements, and their contact biocidal potential was evaluated according to the Japanese Industry standard Z2801. Tested microorganisms comprised Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Candida albicans, and Aspergillus niger. Microbiocidal activity of selected polymer films against E. coli, S. aureus, and A. niger was found, whereas against C. albicans and P. aeruginosa microbiostatic behavior was observed. Moreover, the most potent copolymer revealed no cytotoxicity rendering a biocidal polymer with potential applications in mammalian‐, and in particular, human‐related fields. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ring-Opening Metathesis Polymerization of Cyclooctyne Employing Well-Defined Tungsten Alkylidyne Complexes

Summary: The ring-opening metathesis polymerization of cyclooctyne was studied was studied in the presence of catalytic amounts of the tungsten alkylidyne complexes [RCW(NIm^tBu){OCMe(CF₃)₂}₂] ( 1a: R = CMe₃, 1b: R = Ph). The resulting polymers show relatively narrow polydispersities with the PDI ranging from 1.2 to 2.4. Treatment of 1b with cyclooctyne in dilute toluene or hexane solution afforded only low molecular weight oligomers. The mass spectra of these oligomers indicate the existence of macrocycles of the formula [C(CH₂)₆C]_n (n = 3–9). In contrast, reactions at high substrate concentration led to mixtures of cyclic oligomers and linear polymers, which is probably a result of ring-chain equilibria, established in agreement with the Jacobson-Stockmayer theory of macrocyclization. In contrast, treatment of neat cyclooctyne with a catalytic amount of the catalyst produced medium molecular weight polymers in good yields.     

Imidazol(in)ium-2-Carboxylates as N-Heterocyclic Carbene Ligand Precursors for Ruthenium Metathesis Initiators

Summary: Imidazol(in)ium-2-carboxylates were used as N-heterocyclic carbene (NHC) ligand precursors to convert the [RuCl₂(p-cymene)]₂ dimer into three ruthenium-arene complexes of the [RuCl₂(p-cymene)(NHC)] type. The decarboxylation of NHC · CO₂ betaines also provided a convenient synthetic path to prepare five well-known ruthenium-NHC catalysts for olefin metathesis and related reactions, including the second generation Grubbs and Hoveyda–Grubbs catalysts, via ligand exchange with phosphine-containing, first generation ruthenium-benzylidene or indenylidene complexes. Both procedures are particularly attractive from a practical point of view, because NHC · CO₂ adducts are stable zwitterionic compounds that can be stored and handled with no particular precautions.