Mixture estimation with state-space components and Markov model of switching

The paper proposes a recursive algorithm for estimation of mixtures with state-space components and a dynamic model of switching. Bayesian methodology is adopted. The main features of the presented approach are: (i) recursiveness that enables a real-time performance of the algorithm; (ii) one-pass elaboration of the data sample; (iii) dynamic nature of the model of switching active components; (iv) orientation at explicit solutions with exploitation of numerical procedures only in those parts which cannot be computed analytically; (v) systematic approach to the Bayesian mixture estimation theory.     

Spectral Investigations of Solvatochromism and Preferential Solvation on 1,4-Dihydroxy-2,3-Dimethyl-9,10-Anthraquinone

Solvatochromic and preferential solvation of 1,4-dihydroxy-2,3-dimethyl-9,10-anthraquinone (DHDMAQ) have been investigated using optical absorption and fluorescence emission techniques. Optical absorption spectra of DHDMAQ in different solvents show the intra molecular charge transfer band in the region 400–550nm. The observed blue shift with solvent polarity indicates the delocalisation of the excited state, owing to reduction in quasiaromaticity of the chelate rings formed by intra molecular hydrogen bonds, due to electrostatic or hydrogen bonding interaction. This is also confirmed by the observed low oscillator strength and the transition dipole moment. The observed quantum yield of DHDMAQ in different solvents is due to the inter molecular hydrogen bond in the excited state in addition to the intra molecular hydrogen bond. It also reveals from the low oscillator strength, which indicates that the radiative decay is low. Excited state dipole moment of DHDMAQ is calculated by solvatochromic data and it shows a lower value than ground state dipole moment. The preferential solvation parameter shows that in dimethyl formamide (DMF) + ethanol mixture, the DHDMAQ is preferentially solvated by ethanol in DMF rich region and by DMF in ethanol rich region. In the case of DMF + dichloromethane mixture DHDMAQ is preferentially solvated by DMF.     

Estimation of the normal boiling points of water and 1,2-dimethoxyethane through the viscosity–temperature dependence in the corresponding binary mixtures

Excess quantities calculated from literature values of experimental density and viscosity in 1,2-dimethoxyethane + water binary systems (from 303.15 to 323.15 K) can lead us to test different correlation equations as well as their corresponding derivative properties. Inspection of the Arrhenius activation energy (Ea) and the enthalpy of activation of viscous flow (ΔH*) shows very close values; here, we can define partial molar activation energies Ea₁ and Ea₂ for 1,2-dimethoxyethane and water, respectively, along with their individual contribution separately. Correlation between the two Arrhenius parameters of viscosity in all compositions shows existence of main distinct interaction behaviours delimited by particular mole fractions in 1,2-dimethoxyethane. Moreover, we add that correlation between Arrhenius parameters reveals interesting Arrhenius temperature which is closely related to the vapourisation temperature in the liquid vapour equilibrium, and the limiting corresponding partial molar properties can permit us to estimate the boiling points of the pure components.     

More QACs,more questions: Recent advances in structure activity relationships and hurdles in understanding resistance mechanisms

Quaternary ammonium compounds (QACs) are a class of antimicrobials that have been around for over a century; nevertheless, they have found continued renewal in the structures to which they can be appended. Ranging from antimicrobial polymers to adding novel modes of action to existing antibiotics, QACs have found ongoing use due to their potent properties. However, resistance against QACs has begun to emerge, and the mechanism of resistance is still only partially understood. In this review, we aim to summarize the current state of the field and what is known about the mechanisms of resistance so that the QACs of the future can be designed to be evermore efficacious and utilized to unearth the remaining mysteries that surround bacteria’s resistance to them.     

Excess volumes and densities of binary mixtures of γ-butyrolactone + 1, 3, 5-trimethylbenzene or 1, 2, 4-trimethylbenzene at several temperatures

Densities of two binary mixtures formed by γ-butyrolactone with 1,3,5-trimethylbenzene and 1,2,4-trimethylbenzene have been determined over the full range of compositions over the temperature range (288.15 K to 308.15 K) and the local barometric pressure using a vibrating-tube densimeter. From these experiments, excess molar volumes () have been calculated. It is found to be positive with a maximum at about the mole fraction of 0.5. Excess volumes were also fitted to a Redlich–Kister type equation. Our result shows increases when temperature increases in the studied systems.     

A study of the properties of mixed nonionic surfactants microemulsions by NMR, SAXS, viscosity and conductivity

The pseudoternary phase behavior of the water/sucrose laurate/ethoxylated mono-di-glyceride/R (+)-limonene systems was investigated for different surfactants mixing ratios (w/w) at 25 °C. The microemulsion boundaries were determined and the surfactants content at the interface of water- R (+)-limonene was estimated. For surfactants mixing ratio (w/w) equals unity, the area of the one phase microemulsion region reaches its maximum. The system with the maximum microemulsion area was investigated using electrical conductivity, dynamic viscosity, small angle X-ray scattering, and nuclear magnetic resonance. Electrical conductivity increases as the water volume fraction increases and a percolation threshold was observed. Dynamic Viscosity varies as function of the water volume fraction in a non-monotonic way giving two-peaked plot. The characteristics of the domain size of the microemulsions called periodicity measured by small angle X-ray scattering increases with the increase in the water volume fraction. The correlation length of the domain size reaches a maximum when plotted against the water volume fraction in the microemulsions. Relative diffusion coefficients of water increase and those of oil decrease with increasing the water volume fractions in the microemulsions indicating structural transitions.     

一种新型近共沸混合工质的循环性能实验研究

文中开展了对一种新型近共沸混合物的整机性能实验研究,该混合物具有零ODP值和低GWP值,可作为传统工质R502甚至是R404A的长期替代物。根据国标GB/T 5773-2004搭建了第二制冷剂量热器的整机性能测试实验台。试验在蒸发温度为-40℃的商用制冷温区进行,系统研究了在不同蒸发温度、冷凝温度、过冷度、过热度等工况下的性能。实验结果与R404A进行了比较,包括压比、压缩机功耗、制冷量、COP、吸气温度。实验结果表明,该新工质COP比R404A高9.2%至14.2%。     

Adsorption in Mixtures with Competing Interactions

A binary mixture of oppositely charged particles with additional short-range attraction between like particles and short-range repulsion between different ones in the neighborhood of a substrate preferentially adsorbing the first component is studied by molecular dynamics simulations. The studied thermodynamic states correspond to an approach to the gas–crystal coexistence. Dependence of the near-surface structure, adsorption and selective adsorption on the strength of the wall–particle interactions and the gas density is determined. We find that alternating layers or bilayers of particles of the two components are formed, but the number of the adsorbed layers, their orientation and the ordered patterns formed inside these layers could be quite different for different substrates and gas density. Different structures are associated with different numbers of adsorbed layers, and for strong attraction the thickness of the adsorbed film can be as large as seven particle diameters. In all cases, similar amount of particles of the two components is adsorbed, because of the long-range attraction between different particles.     

Electrodegradation of Acid Mixture Dye through the Employment of Cu/Fe Macro-Corrosion Galvanic Cell in Na2SO4 Synthetic Wastewater

Traditional wastewater purification processes are based on a combination of physical, chemical, and biological methods; however, typical electrochemical techniques for removing pollutants require large amounts of electrical energy. In this study, we report on a process of wastewater purification, through continuous anodic dissolution of iron anode for aerated Cu/Fe galvanic cell in synthetic Na₂SO₄ wastewater solution. Electrochemical experiments were conducted by means of a laboratory size electrolyzer, where electrocoagulation along with electrooxidation phenomena were examined for wastewater containing Acid Mixture dye. The above was visualized through the employment of electrochemical (cyclic voltammetry and ac impedance spectroscopy techniques) along with instrumental spectroscopy analyses.     

Simultaneous analysis of current‐use pesticides and their transformation products in water using mixture‐sorbent solid phase extraction and high‐performance liquid chromatography–tandem mass spectrometry

Pesticides have posed significant threats to aquatic ecosystems, yet little is known about their transformation products. The challenge is to simultaneously analyze various pesticides and transformation products in water as they have distinct physicochemical properties. A mix‐mode solid phase extraction method was established to simultaneously analyze current‐use pesticides and their transformation products using a mixture of hydrophile–lipophile balance, weak anion, and cation exchange resins (2:1:1, w/w/w) in combination with high‐performance liquid chromatography and tandem mass spectrometry for chemical quantification. Neutral, acidic, and alkaline methanol were used as the elution solvent. Box‐Behnken design was applied to optimize extraction conditions. Optimal conditions were as follows: sorbent mass, 200 mg; volume of elution solvent, 5 mL × 3; pH 4. The method was validated for compounds at concentrations from 20 to 1000 ng/L in different types of water samples, with recovery being from 43.5 ± 3.1 to 141 ± 35%. Low method detection limits (0.02?5.6 ng/L) implied that the developed method was sensitive. Finally, the method was applied to monitor current‐use pesticides and their transformation products in natural waters. Frequent detection of transformation products of pesticides indicated that their contribution to aquatic risk should not be ignored.