取代基物化参数及其在药物定量构效关系中的应用

把取代基电性、立体及疏水性物化参数组合建立一种新取代基描述方法, 对环尿素类和N,N-二甲基-2-溴苯乙胺类衍生物进行结构表征. 对训练样本集通过逐步回归筛选变量, 所建多元线性回归方程R2分别为0.853和0.960, 留一法交互检验Rcv2分别为0.723和0.901；用预测集样本作外部预测, 所得Qext2分别为0.7617和0.7653. 结果显示：环尿素类化合物结构中苯环邻位立体、间位疏水、对位疏水及立体因素对该类药物抗HIV活性产生阻抑作用； N,N-二甲基-2-溴苯乙胺类苯环上取代基立体因素及对位给电子效应有利于提高肾上腺素能阻断活性.     

毒蕈碱受体激动剂的三维定量构效关系研究

采用比较分子场分析法(CoMFA)研究了55个四氢吡啶类毒蕈碱受体激动剂的三维定量构效关系(3D-QSAR), 建立了具有较强预测能力的3D-QSAR模型. 所得模型的交叉验证相关系数(q²)为0.507, 常规相关系数(R²)为0.982 , 标准方差为0.218, 说明系列化合物分子周围立体场和静电场的分布与生物活性间存在良好的相关性. 模型不仅很好地预测了训练集和测试集化合物的活性, 而且为设计活性更高的受体激动剂提供了理论依据.     

Limited proteolysis combined with isotope labeling and quantitative LC-MALDI MS for monitoring protein conformational changes: a study on calcium-binding sites of cardiac Troponin C

Studies of protein-protein and protein-ligand interactions are important for understanding biological functions of proteins. A new technique based on the partial proteolysis of proteins combined with quantitative mass spectrometry is developed as a means of tracking structural changes after the formation of a protein-ligand complex. In this technique, a protein of interest with and without the binding of a ligand is digested with an enzyme to generate a set of peptides, followed by separation of the peptides by liquid chromatography. Matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) is used to identify chromatographically separated peptides, and locate their sequence alignments in the parent protein. Using an isotopically labeled protein as a sample against an unlabeled protein standard, quantitative information can be gathered. This overcomes the inherent lack of quantitative capability of MALDI MS. The utility of the technique to investigate protein-ligand interactions is demonstrated in a model system involving calcium binding to cardiac Troponin C (cTnC). Using this technique, the general location of the three calcium-binding sites of cTnC can be determined by using several different enzymes to generate overlapping peptide maps of cTnC.     

Uncertainty assessment from robustness testing applied on an LC assay for R-timolol and other related substances in S-timolol maleate

The robustness testing of a normal-phase liquid chromatographic (LC) method for the determination of R-timolol and other related substances in S-timolol maleate was performed applying a two-level Plackett-Burman design. Two qualitative and five quantitative factors were examined. Two types of responses were considered, qualitative, i.e. chromatographic performance criteria, and quantitative ones. The latter were taken into account to determine if the analytical procedure was robust. The quantitative responses were the contents of R-timolol in two S-timolol maleate samples. Even though some significant factor effects were observed on the qualitative responses, the R-timolol contents were not significantly different from those observed at nominal conditions, which demonstrated the robustness of the procedure.Since the experiments of the Plackett-Burman design can be assimilated to laboratories in an interlaboratory study, uncertainty can be evaluated using the robustness test data. The robustness test was set-up in such a way that the required variances could be estimated. It was shown that the robustness set-up allows estimating the reproducibility uncertainty without performing an interlaboratory study.     

Validation of a direct non-destructive quantitative analysis of amiodarone hydrochloride in Angoron formulations using FT-Raman spectroscopy

Raman spectroscopy was applied for the direct non-destructive analysis of amiodarone hydrochloride (ADH), the active ingredient of the liquid formulation Angoron^®. The FT-Raman spectra were obtained through the un-broken as-received ampoules of Angoron^®. Using the most intense vibration of the active pharmaceutical ingredient (API) at 1568 cm⁻¹, a calibration model, based on solutions with known concentrations, was developed. The model was applied to the Raman spectra recorded from three as-purchased commercial formulations of Angoron^® having nominal strength of 50 mg ml⁻¹ ADH. The average value of the API in these samples was found to be 48.56 ± 0.64 mg ml⁻¹ while the detection limit of the proposed technique was found to be 2.11 mg ml⁻¹. The results were compared to those obtained from the application of HPLC using the methodology described in the European Pharmacopoeia and found to be in excellent agreement. The proposed analytical methodology was also validated by evaluating the linearity of the calibration line as well as its accuracy and precision. The main advantage of Raman spectroscopy over HPLC method during routine analysis is that it is considerably faster and no solvent consuming. Furthermore, Raman spectroscopy is non-destructive for the sample. However, the detection limit for Raman spectroscopy is much higher than the corresponding for the HPLC methodology.     

Microdialysis sampling and high-performance liquid chromatography with chemiluminescence detection for in-vivo on-line determination and study of the pharmacokinetics of levodopa in blood

A simple, reliable, and reproducible method for in-vivo on-line separation and determination of levodopa has been based on microdialysis then high-performance liquid chromatography with chemiluminescence detection. The perfusate is perfused at a flow rate of 5 L min^–1. The concentration of levodopa in the dialysate is determined on line with a chemiluminescence system. The dialysate sample volume is approximately 20 L. The response of the system is linearly related to the concentration of levodopa in the range 1×10^–8 to 1×10^–6 g mL^–1 (r²=0.9995) with a detection limit (3) of 3×10^–9 g mL^–1 and sample throughput of 12 h^–1; RSD is 2.8% (n=11). The method has been successfully used to study the pharmacokinetics of levodopa in vivo; the values of the pharmacokinetics parameters C_max, AUC_0–t and T_max were 16.60, 20.92 ng mL^–1, and 90 min, respectively.     

Comparison of gas chromatographic and gas chromatographic/mass spectrometric techniques for the analysis of TNT and related nitroaromatic compounds

The use of capillary column gas chromatography and gas chromatography/mass spectrometry for the analysis of a series of standard solutions (0.1 to 10 μg/ml) of 2,4,6-trinitrotoluene (TNT) and eight other nitroaromatic components was evaluated. The techniques included gas chromatography with electron capture detection (GC/ECD), full scan and selected ion monitoring gas chromatography/mass spectrometry with electron impact ionization (EI/FS and EI/SIM), full scan and selected ion monitoring gas chromatography/mass spectrometry with positive ion chemical ionization using methane reagent gas (PICI/FS and PICI/SIM), and full scan and selected ion monitoring gas chromatography/mass spectrometry with negative ion chemical ionization using methane reagent gas (NICI/FS and NICI/SIM). The performance of the techniques was comapared by determining the linear response range, precision, and detection limits of the analyses.     

Quantitative determination of organochlorine pesticides in sewage sludges using soxtec,soxhlet and pressurized liquid extractions and ion trap mass–mass spectrometric detection

A new analytical method is described for the determination of organochlorine pesticides (OCPs) in sewage sludges using GC-ion trap-MS–MS. In this work, 16 organo-chlorine pesticides (OCPs) listed by the US Environmental Protection Agency (US EPA) as priority pollutants were separated and quantified. Sludge samples from three of Kuwaits wastewater treatment plants (WWTPs) were analyzed for organochlorine pesticides (OCPs). Spiked sludge samples were extracted with a mixture of (1:1 v/v) dichloromethane (DCM)/hexane. The extracts were cleaned on a silica/aluminum oxide column, then transferred to a gel permeation chromatography (GPC) column, before undergoing further silica/aluminum oxide clean-up; the presence of OCPs was then confirmed by GC-ion trap-MS–MS. Three extraction techniques, soxtec, soxhlet, and pressurized liquid extractions were utilized, compared and validated using the spiked sludge samples. The methods were validated in term of accuracy (recovery) and precision (RSD). The method recovery values varyied from 76.1 to 92.9% for the three extraction techniques.