An easy preparation of pyridinium N-heteroarylaminides

Differently substituted pyridinium N-heteroarylaminides have been prepared in one step with good yield from N-aminopyridinium iodide and the corresponding heteroaryl chloride.     

Studies on thermotropic liquid crystalline polymer. XI. Effect of amide group on thermotropic liquid crystalline polymer properties

A series of poly(azomethine)s containing amide, ether, or ester groups was prepared by the condensation of dialdehydes with various diamines. The thermotropic liquid crystalline properties were examined by DSC and microscopic observations. The effects of the number and position of amide groups, which are attached to the rigid segment, on the thermotropic liquid crystalline properties of the homo-and copoly(amide-azomethine-ether)s were also investigated in this study. The copolymerization took place by changing the amount of amide group to obtain copoly(amide-azomethine) ( P13 and P14 ) which exhibit thermotropic liquid crystalline properties. The poly(azomethine)s containing ether or ester groups also exhibited thermotropic liquid crystalline properties. © 1993 John Wiley & Sons, Inc.     

2,2′-(1,2-亚苯基二氧)二(N-苯基乙酰胺)及其稀土配合物的合成、表征与荧光性质

合成了一种新的芳香族酰胺配体2，2’-（1，2-亚苯基二氧）二（N-苯基乙酰胺）及其稀土（La，Eu，Tb，Dy，Sm，Gd）硝酸盐配合物，通过核磁共振谱、元素分析、摩尔电导、红外光谱、差热等测试技术对其进行了结构表征。结果表明，稀土配合物的可能结构为：[REL（NO3）3]·H2O（RE：La^3＋、Sm^3＋、Eu^3＋、Gd^3＋、Tb^3＋、Dy^3＋）．配合物产率约为78％。在稀土配合物中，作为抗衡阴离子的3个硝酸根均以双齿的配位方式与稀土配位，稀土配位数为10，并且还有1个结晶水。在298K下对配合物[EuL（NO3）3]·H2O和[TI）L（N03）3]·H2O的固体荧光性质进行了研究。结果发现，它们分别发射Eu^3＋和Tb^3＋稀土离子的特征荧光，且配合物[TbL（NO3）3]·H2O的荧光比[EuL（NO3）3]·H2O的荧光强。说明此芳香族酰胺配体敏论Tb^3＋发光比敏化Eu^3＋发光程度大。     

Sulfonated poly(ether ether ketone)/poly(amide imide) polymer blends for proton conducting membrane

Poly(amide imide) (PAI) was synthesized using 1,2,4-benzenetricarboxylic anhydride (BTBA) and 4,4′-methylenebis(phenyl isocyanate) (MBPI). SPEEK/PAI blend membranes were prepared and investigated by NMR, GPC, FT-IR and AFM. The chemical structures of PAI and SPEEK were characterized by using NMR and FT-IR. The adsorption of the SPEEK/PAI blend membrane of water or methanol solution was also characterized. The significant swelling of the blend membrane in concentrated methanol solution was explained by the solubility parameter. The water diffusion coefficient (D_H2O) was related to the lambda value of the membrane. The SPEEK/PAI blend membrane had a lower proton conductivity and methanol permeability than Nafion. However, the relative selectivity (proton conductivity divided by methanol permeability) of the SPEEK/PAI 70/30 (w/w) blend membrane was 3.46 × 10⁴ S s cm⁻³, which is closed to that of Nafion (3.30 S s cm⁻³).     

Thermotropic copolyamides from triethyleneglycol bis (4-carboxyphenyl) ether,aromatic diamines,and p-aminobenzoic acid

It is proposed that depression of the transition temperatures, especially the melting point (T_m), can be achieved by the introduction of a different amide bond structure into the copolyamides of dicarboxylic acids and diamines by copolymerization of aminocarboxylic acids, such as p-aminobenzoic acid. The effect was examined by the amount and distribution of the structure in the copolylamindes. Copolycondensations of PEG₃, p-aminobenzoic acid, and diamines with different chain lengths showed that the structural change of the amide bond in the copolymers, especially its distribution, was more important than its total amount in them. Several types of aminocarboxylic acids were briefly examined to study the effect. © 1994 John Wiley & Sons, Inc.     

丙烯酸β-羧乙酯-苯乙烯共聚物缩合异烟肼的合成及其水解释放研究

<正> 大分子载体药物是精细高分子合成的一个重要研究领域,作为药物载体的大分子骨架需有良好的生物相容性及控制释放能力。本文采用具有较长柔性侧支链的丙烯酸β-羧乙酯(APA)-苯乙烯(St)共聚物作载体,并通过羧基与抗结核药物异烟肼反应,制备出毒性较低并能控制释放的大分子载体异烟肼药物。     

Synthesis and characterization of novel heat resistant poly(amide imide)s

A series of new poly(amide imide)s was prepared from new diacid containing sulfone, ether, amide and imide groups with various aromatic diamines. The diacid was synthesized via four steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide. In the second step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide. In the next step for the preparation of diamine, the reaction of 4-amino-N-(4-hydroxy phenyl) benzamide with bis-(4-chlorophenyl) sulfone in the presence of K₂CO₃ was achieved. The prepared sulfone ether amide diamine was reacted with two moles of trimellitic anhydride to synthesize related sulfone ether amide imide diacid. The precursors and final monomer were characterized by FT-IR, H-NMR and elemental analysis. Direct polycondensation reaction of the sulfone ether amide imide diacid with different diamines in the presence of triphenyl phosphite afforded five different poly (sulfone ether amide imide amide)s. The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.     

Synthesis of new thiazole analogues of pyochelin, a siderophore of Pseudomonas aeruginosa and Burkholderia cepacia. A new conversion of thiazolines into thiazoles

Three pyochelin analogues and their methyl esters all containing a thiazole ring have been synthesised from the same Weinreb amide key intermediate. One of these analogues called HPTT-COOH, a molecule released in the course of pyochelin and yersiniabactin biosynthesis, was efficiently synthesised using a new base induced conversion of the key compound 2′-(2-hydroxyphenyl)-2′-thiazoline-4′-(N-methoxy,N-methyl) carboxamide into 2′-(2-hydroxyphenyl)-2′-thiazole-4′-(N-methoxy,N-methyl) carboxamide.     

Synthesis and characterization of new optically active poly(amide‐imide)s containing epiclon and L‐methionine moieties in the main chain

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione] (1) was reacted with L ‐methionine (2) in acetic acid and the resulting imide‐acid 3 was obtained in high yield. The diacid chloride 4 was prepared from diacid derivative 3 by reaction with thionyl chloride. Thermostable poly(amide‐imide)s containing epiclon structure were synthesized by reacting of diacid chloride 4 with various aromatic diamines. Polymerization reaction was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.15 to 0.36 dl/g were obtained with high yield. All of the above polymers were fully characterized by ¹H‐NMR, FT‐IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Chemistry of polyfunctional molecules-123. Reactions of BiBr3, SbI3 and AsI3 with LiN(PPh2)2; X-ray structure of a cyclophosphazene salt containing arsenic(I)

BiBr₃ or SbI₃ react at 20°C with LiN(PPh₂)₂ (1) to give elementary Bi or Sb and the P---P coupled phosphazene ligand Ph₂P---N=PPh₂---PPh₂=N---PPh₂ (2). The reaction of AsI₃ with 1 at room temperature formed yellow needles of the eight-membered heterocycle (3), whereas AsI₃ interacted at 80°C with 1 in the molar ratio of 1:3 to give elementary arsenic and 2. Treatment of AsI₃ and 1 at 20°C in a 1:2 stoichiometry yielded the seven-membered, cyclic arsenium(I) salt

Full-size image

I·4THF (5·4THF), which was characterized by elemental analysis, conductivity, mass, IR and NMR spectroscopy and single-crystal X-ray structural analysis.