The origin of spectral distortion in electric field modulation spectroscopy based on scanning tunneling microscopy

Electric field modulation spectroscopy using scanning tunneling microscopy (STM-EFMS) measurements were performed for a Si(1 1 1) surface with epitaxially-grown β-FeSi₂ islands. STM-EFMS spectra acquired around the indirect energy gap of Si reproduced the photon energy peak position observed in conventional macroscopic EFMS experiments. However, a considerable discrepancy was found in the energy position of the accompanying spectral dip. We examined two possibilities for the cause of this discrepancy. The first interpretation is that the STM-‘EFMS’ spectra may simply reflect the local density of states based on essentially the same principle as that of tunneling spectroscopy. However, this interpretation is ruled out by the facts that almost identical STM-EFMS spectra are obtained also out of the regime of tunneling. The second interpretation is a spectral distortion due to a large electric field steadily built in the sample surface, which is supported experimentally by a spectral shift of the dip energy that is induced by altering the tip-induced band bending.     

Highly efficient greenish blue-emitting organic diodes based on pyrene derivatives

We report the synthesis of pyrene derivatives as the light emissive layer for highly efficient organic electroluminescence (EL) diodes. Multilayer devices were fabricated with pyrene derivatives (ITO/NPB (50 nm)/blue material (30 nm)/BCP (10 nm)/Alq₃ (30 nm)/LiF (1 nm)/Al). By using 1,1′-dipyrene (DP) and 1,4-dipyrenyl benzene (DPB), the devices produced the blue EL emissions with 1931 Commission International de L’Eclairage coordinates of (x=0.21, y=0.35) and (x=0.19, y=0.25), respectively. The device with DPB shows a maximum brightness of 42,445 cd/m² at 400 mA/cm² and the luminance efficiency of 8.57 cd/A and 5.18 lm/W at 20 mA/cm².     

The laser-induced fluorescence spectroscopy of CoF in the ultra violet region

The laser-induced fluorescence (LIF) spectrum of jet-cooled CoF has been obtained in the wavelength region of 260-290 nm for the first time. Seventeen vibronic bands were observed and assigned to three types of transition from the ground state to upper states Ω′ = 3, 4, 5 by rotational analysis. A new vibrational transition with the 0-0 band at 34697.22 cm⁻¹ has been assigned as the [34.7]³Γ₅-X³Φ₄ transition and effective equilibrium molecular constants for the upper state have been determined. In addition, lifetime measurements have been carried out for most of the bands under collision-free conditions. On the basis of the spectroscopic data and lifetime measurements, the electronic structures of these possible high-lying electronic states are discussed.     

Effect of different electronic properties on 9-aryl-substituted BMVC derivatives for new fluorescence probes

We have previously illustrated that the electron donor of carbazole moiety and the electron acceptor of methyl pyridinium cation in 3,6-bis(1-methyl-4-vinylpyridinium) carbazole diiodide (BMVC) molecule could form an intramolecular charge-transfer state. The intramolecular twist of the vinyl group in bridging the donor and acceptor plays an important role in the BMVC fluorescence. Here, we have synthesized three 9-aryl-substituted BMVC derivatives with different electronic properties for the design of the second generation of fluorescence probes. The steady-state solvatochromic studies show no appreciable change to the charge transfer of BMVC by substituting an anisole electron-donating group at 9-position of BMVC. However, substituting a 9-nitrobenzyl electron-withdrawing group in BMVC could restrict the charge transfer in the excited state. Moreover, the increase of the fluorescence yields of 9-anisole BMVC and 9-phenyl BMVC upon interaction with DNA is even higher than that in glycerol, while the fluorescence yield of 9-nitrobenzyl BMVC upon interaction with DNA is much lower than that in glycerol. Although 9-nitrobenzyl BMVC is a good G-quadruplex stabilizer, substituting an electron-withdrawing group at 9-position of BMVC is not recommended for the design of fluorescence probes. On the other hand, co-localization between 9-phenyl BMVC and MitoTracker Red in the merged image of cells indicates that the 9-phenyl BMVC is a potential fluorescent mitochondrial probe.     

Hysteresis of ruby fluorescent line by pressure and annealing effect

Abstract

Accuracy of hydrostatic pressure measurement in a diamond-anvil cell (DAC) depends on the reproducibility of ruby RI fluorescent measurement. The larger scatter in R, fluorescent wavelength shift than the reproducibility of spectroscopic measurement was observed among appropriately mirror-finished ruby plates before setting up in DAC. The characteristics of the scatter changed after loading DAC up to pressure over hydrostatic limit. They vanished by annealing the ruby plates. These phenomena are presumably due to the appearance and disappearance of the residual stress in the ruby crystal. Such hysteresis of ruby fluorescent wavelength shift by pressure and its annealing effect are discussed.     

Custom‐Fit Ruthenium(II) Metallopeptides: A New Twist to DNA Binding With Coordination Compounds

A new bipyridine building block has been used for the solid‐phase synthesis of dinuclear DNA‐binding ruthenium(II) metallopeptides. Detailed spectroscopic studies suggest that these compounds bind to the DNA by insertion into the DNA minor groove. Moreover, the potential of the solid‐phase peptide synthesis approach is demonstrated by the straightforward synthesis of an octaarginine derivative that shows effective cellular internalization and cytotoxicity linked with strong DNA interaction, as evidenced by steady‐state fluorescence spectroscopy and AFM studies.     

Quantification of ATRP initiator density on polymer latex particles by fluorescence labeling technique using copper‐catalyzed azide‐alkyne cycloaddition

We developed a novel fluorescence labeling technique for quantification of surface densities of atom transfer radical polymerization (ATRP) initiators on polymer particles. The cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) polymer latex particles carrying ATRP‐initiating chlorine groups were prepared by emulsifier‐free emulsion polymerization of styrene (St), 2‐(2‐chloropropionyloxy)ethyl methacrylate (CPEM), and N‐n‐butyl‐N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethylammonium bromide (C₄DMAEMA). ATRP initiators on the surface of polymer particles were converted into azide groups by sodium azide, followed by fluorescent labeling with 5‐(N,N‐dimethylamino)‐N′‐(prop‐2‐yn‐1‐yl)naphthalene‐1‐sulfonamide (Dansyl‐alkyne) by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The reaction time required for both azidation of ATRP‐initiating groups and successive fluorescence labeling of azide groups with Dansyl‐alkyne by CuAAC were investigated in detail by FTIR and fluorescence spectral measurement, respectively. The ATRP initiator densities on the cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) particle surfaces were estimated to be 0.21 and 0.15 molecules nm^?2, respectively, which gave close agreement with values previously determined by a conductometric titration method. The fluorescence labeling through click chemistry proposed herein is a versatile technique to quantify the surface ATRP initiator density both on anionic and cationic polymer particles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4042–4051     

Conjugated polyelectrolytes and neutral polymers with poly(2,7‐carbazole) backbone: Synthesis,characterization, and photovoltaic application

Poly(2,7‐carbazole) neutral polymers (PC‐N, PC‐NOH, and PC‐P) and polyelectrolytes (PC‐NBr and PC‐SO₃Na) with hydrophilic pendant groups of ammonium, phosphonate, and sulfonate were synthesized as interlayers for cathode modifications in bulk‐heterojunction photovoltaic cells (BHJ PVCs). The absorptions of the polymers were determined by the poly(2,7‐carbazole) backbone, showing absorption peaks at ～390 nm for their solutions and films. Because of large intermolecular interactions, excimer emissions with wavelengths higher than 500 nm were found in the photoluminescence spectra of the films of the polymers, which weakened the light emissions of the polymers. PC‐N, PC‐NBr, PC‐NOH, and PC‐P possessed comparable HOMO levels of ?5.23 eV and LUMO levels of ?2.4 eV, but HOMO and LUMO levels of PC‐SO₃Na were up‐lying to ?4.91 and ?2.12 eV, respectively. PC‐N, PC‐NBr, PC‐NOH, and PC‐P were selected to construct thin interlayers in BHJ PVCs with PFO‐DBT35:PCBM = 1:4 as the active layer. Compared with traditional Al cathode, bilayer cathodes with the interlayers showed improvements of open‐circuit voltages and short‐circuit currents of the PVCs. PC‐NOH was the best for the photovoltaic performances and over 20% increase of power conversion efficiency (PCE) was achieved. The bilayer cathodes would have great potential to further elevate PCE of BHJ PVCs with other active layer materials. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of main‐chain poly(carbazole)s via CuAAC

The synthesis and characterization of a novel family of main‐chain carbazole‐containing polymers using copper‐catalyzed azide‐alkyne cycloaddition chemistry is reported. The reactions were performed under mild conditions using readily available copper catalysts and ligands, which afforded polymeric products with M_ws up to 18 kDa. Using a range of techniques, the polymers were found to exhibit a glass transition temperature (T_g) of 85 °C, high thermal stability (T_d = 274 °C), and high photoluminescent quantum efficiency (?_f = 0.29; λ_em = 448 nm), which underscore their potential for use in organic light‐emitting diodes or other emissive devices, particularly where efficient blue emission is of value. The approach described offers practical advantages over other synthetic methods used to prepare main‐chain carbazole‐containing polymers, especially with regard to the lack of need for rigorously inert conditions and the absence of byproducts generated during the polymerization reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011