Fiber optical parametric amplifiers in optical communication systems

The prospects for using fiber optical parametric amplifiers (OPAs) in optical communication systems are reviewed. Phase‐insensitive amplifiers (PIAs) and phase‐sensitive amplifiers (PSAs) are considered. Low‐penalty amplification at/or near 1 Tb/s has been achieved, for both wavelength‐ and time‐division multiplexed formats. High‐quality mid‐span spectral inversion has been demonstrated at 0.64 Tb/s, avoiding electronic dispersion compensation. All‐optical amplitude regeneration of amplitude‐modulated signals has been performed, while PSAs have been used to demonstrate phase regeneration of phase‐modulated signals. A PSA with 1.1‐dB noise figure has been demonstrated, and preliminary wavelength‐division multiplexing experiments have been performed with PSAs. 512 Gb/s have been transmitted over 6,000 km by periodic phase conjugation. Simulations indicate that PIAs could reach data rate x reach products in excess of 14,000 Tb/s × km in realistic wavelength‐division multiplexed long‐haul networks. Technical challenges remaining to be addressed in order for fiber OPAs to become useful for long‐haul communication networks are discussed.

     

Regulating the Oil-Water Interface to Construct Double Emulsions: Current Understanding and Their Biomedical Applications

Double emulsions have been extensively used in scientific researches and industrial applications due to their attractive unique feature of multiple phases. However, constructing droplets with such a complex structure is not a simple task for all time. The simultaneous existence of two contradictory interfaces makes it hard to prepare stable double emulsions in principle and in practice. Over the past century, tremendous efforts have been devoted by myriads of scientists to make progresses in both theory and preparation of double emulsions. In this review, the current understanding of double emulsions is systematically revealed. In addition to emphasizing the corresponding pioneer and landmark works as many as possible, the state-of-the-art achievements will also be discussed. By regulating the oil-water interface with smartly designed interface-active agents in combination with varying the phase volume fractions, the basic theory framework based on the phase inversion from simple emulsions to double emulsions is also summarized. Technical preparation strategies of emulsification are introduced to show the building process of the two contradictory interfaces in one system. Furthermore, some specific biomedical applications of double emulsions are also discussed, which is expected to stimulate further innovation and utilization of double emulsions.     

Fabrication of Alginate-Based O/W Nanoemulsions for Transdermal Drug Delivery of Lidocaine: Influence of the Oil Phase and Surfactant

Transdermal drug delivery of lidocaine is a good choice for local anesthetic delivery. Microemulsions have shown great effectiveness for the transdermal transport of lidocaine. Oil-in-water nanoemulsions are particularly suitable for encapsulation of lipophilic molecules because of their ability to form stable and transparent delivery systems with good skin permeation. However, fabrication of nanoemulsions containing lidocaine to provide an extended local anesthetic effect is challenging. Hence, the aim of this study was to address this issue by employing alginate-based o/w nanocarriers using nanoemulsion template that is prepared by combined approaches of ultrasound and phase inversion temperature (PIT). In this study, the influence of system composition such as oil type, oil and surfactant concentration on the particle size, in vitro release and skin permeation of lidocaine nanoemulsions was investigated. Structural characterization of lidocaine nanoemulsions as a function of water dilution was done using DSC. Nanoemulsions with small droplet diameters (d < 150 nm) were obtained as demonstrated by dynamic light scattering (DLS) and cryo-TEM. These nanoemulsions were also able to release 90% of their content within 24-h through PDMS and pig skin and able to the drug release over a 48-h. This extended-release profile is highly favorable in transdermal drug delivery and shows the great potential of this nanoemulsion as delivery system.     

Spectral editing in solid-state MAS NMR of quadrupolar nuclei using selective satellite inversion

A sensitivity enhancement method based on selective adiabatic inversion of a satellite transition has been employed in a (pi/2)CT-(pi)ST1-(pi/2)CT spectral editing sequence to both enhance and resolve multisite NMR spectra of quadrupolar nuclei. In addition to a total enhancement of 2.5 times for spin 3/2 nuclei, enhancements up to 2.0 times is reported for the edited sites in a mixture of rubidium salts.     

溶剂诱导翻转Pickering乳液用于原位循环使用酶催化剂

Separation and recycling of catalysts are crucial for realizing the objectives of sustainable and green chemistry but remain a great challenge, especially for enzyme biocatalysts. In this work, we report a new solvent-induced reversible inversion of Pickering emulsions stabilized by Janus mesosilica nanosheets (JMSNs), which is then utilized as a strategy for the in situ separation and recycling of enzymes. The interfacial active solid particle JMSNs is carefully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption experiments, Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA).The JMSNs are demonstrated to show order-oriented mesochannels with a large specific surface area, and the hydrophobic octylgroup is selectively modified on one side of the nanosheets. Furthermore, the inversion is found to be a fast process that is strongly dependent on the interfacial activity of the solid emulsifier JMSNs. Such a phase inversion is also a general process that can be realized in various oil/water phasic systems, including ethyl acetate-water, octane-water, and cyclohexane-water systems. By carefully analyzing the capacity of JMSNs with different surface wettabilities for phase inversion, a triphase contact angle (θ) close to 90° and a critical oil-water ratio of 1 : 2 are identified as the key factors to achieve solvent-induced phase inversion via a catastrophic phase inversion mechanism. Importantly, this reversible phase inversion is suitable for the separation and recycling of enzyme biocatalysts that are sensitive to changes in the reaction medium. Specifically, during the reaction, the organic substrates are dissolved in the oil droplets and the water-soluble catalysts are dispersed in the water phase, while a majority of the product is released into the upper oil phase and the enzyme catalyst is confined inside the water droplets in the bottom layer after phase inversion. The perpendicular mesochannels of JMSNs provide a highly accessible reaction interface, and their excellent interfacial activity allows for more than 10 rounds of consecutive phase inversions by simply adjusting the ratio of oil to water in the system. Using the enzymatic hydrolysis kinetic resolution of racemic acetate as an example, our Pickering emulsion system shows not only a 3-fold enhanced activity but also excellent recyclability. Because no sensitive chemical reagents are used in this phase inversion process, the intrinsic activities of the catalysts can be preserved even after seven cycles. The current study provides an alternative strategy for the separation and recycling of enzymes, in addition to revealing a new innovative application for Janus-type nanoparticles.     

Preparation of crosslinked epoxy microparticles via phase inversion

Differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) studies have been performed to reveal a crosslinked epoxy nature of the spherical particles formed in cured epoxy/DDS/PMMA blends. An interesting phase inversion phenomenon was observed in cured DGEBA/DDS/PMMA blends, which occurred at a relatively low thermoplastic composition of 20 phr PMMA in blends. A unique method of preparing crosslinked epoxy spheres of controlled sizes based on cure-induced phase inversion is described in this report. Several factors have been found to affect the geometry of the formed epoxy spheres. The volume fraction of PMMA in the blends strongly dominates the influence. With the increase of PMMA volume fraction in the blends, the spheres not only become smaller in sizes, but also more regular in the spherical geometry due to less impingement. The crosslinking density (DDS phr in the blends) has been found to influence the average sizes of the spheres. The cure temperature has relatively limited effects only when the PMMA loadings in the blends are relatively small. Various potential applications for the epoxy microspheres may be investigated in future studies. © 1996 John Wiley & Sons, Inc.     

基于连续量子级联激光器的1103.4cm–1处NH3混叠吸收光谱特性研究

由于NH3在大气气溶胶化学中具有重要作用,所以快速和精确反演NH3浓度对环境问题非常重要.本文以9.05μm的室温连续量子级联激光器(quantum cascade laser,QCL)作为光源,采用波长扫描直接吸收可调谐二极管激光吸收光谱(tunable diode laser absorption spectroscopy,TDLAS)技术,研究了QCL在1103.4 cm–1的光谱特性,获得了激光器控制的温度电流与波长的关系.设计了QCL二级温控的低压实验平台,测量氨气在1103.4 cm–1处的6条混叠吸收线,在降低压强的情况下谱线展宽变小,使混叠光谱分离,由此计算各条吸收线的线强,进一步对测量不确定度进行分析.针对混叠严重的光谱提出了低压分离单光谱精确反演气体浓度的方法,并进行了实验验证.通过与HITRAN数据库进行结果对比,得出氨气在1103.4 cm–1的实验测量线强值与数据库偏差为2.71%-4.71%,实验测量线强值的不确定度在2.42%-8.92%,极低压条件下反演浓度与实际值的偏差在1%-3%.     

湍流大气传输中跟踪抖动对远场影响的仿真研究

分析了跟踪抖动对湍流大气传输远场光斑的影响。基于麦克斯韦电磁场理论,采用大气相干长度对大气湍流进行描述,推导了发射光束因跟踪抖动导致光轴偏离的远场表达式。在此基础上,利用相位屏法模拟抖动引起的倾斜相位和大气折射率起伏引起的相位调制,并采用低频补偿的功率谱反演法对传输过程进行了数值仿真。分析了不同跟踪抖动、湍流强度条件下远场光斑质心脱靶量的变化,以及不同尺寸模拟目标的回波概率。分析结果表明,在传输距离为10 km时,强湍流造成的远场光斑脱靶量可达几十μrad;当跟踪抖动较大时,湍流强弱对脱靶量影响差别很小。最后,对一定尺寸的模拟目标,从探测回波概率的角度给出了发射系统跟踪抖动量的控制范围。     

基于科赫曲线分形结构太赫兹带通滤波器

太赫兹滤波器是太赫兹通信、太赫兹成像和太赫兹检测等太赫兹应用系统中不可或缺的功能器件。按照不同的分类方式,滤波器有不同的种类,常见的按照选频功能可分为高通滤波器、低通滤波器、带阻滤波器和带通滤波器。为了实现在太赫兹波段的滤波效果,世界各地的研究人员利用不同的结构、材料和控制方式实现了功能各异的太赫兹滤波器,但是考虑到设计的器件要应用到太赫兹系统中,成本低廉、结构简单、性能优越的太赫兹滤波器一直是研究人员的追求。分形概念自提出以来在很多研究领域都有了快速发展,但是在太赫兹波段的应用还不是很常见,特别是应用于太赫兹功能器件的设计。引入分形中科赫曲线的概念设计并制备了一种新型的太赫兹带通滤波器,该滤波器是在金属薄膜上刻蚀出科赫曲线分形结构,当太赫兹波垂直入射到该滤波器时候实现了在太赫兹波段的窄带滤波。在滤波器的设计过程中,追求理论与实验相结合,首先在电磁仿真软件中建立科赫曲线分形结构滤波器模型进行计算,探究分形结构应用于太赫兹波段进行滤波的可行性,在进行多次计算之后得到优化后的尺寸和结构,然后根据优化后的尺寸加工出科赫曲线分形结构太赫兹滤波器样品,并且将样品放在太赫兹时域光谱系统中进行实验测量,得到实验数据后与仿真结果进行比较。在仿真中利用了时域有限差分法模拟科赫曲线分形结构太赫兹带通滤波器的传输特性,优化后的仿真结果表明:滤波器的谐振频率为0.715 THz,透射系数能够达到0.92,-3 dB带宽为21.9 GHz,将仿真得到的散射参数进行S参数反演得到了太赫兹滤波器样品的电磁参数,这在理论上分析了太赫兹波在谐振点处产生透射增强的原因。利用飞秒激光微加工系统制备了尺寸优化后的科赫曲线分形结构太赫兹带通滤波器样品,然后使用太赫兹时域光谱系统对样品的传输特性进行测试,对实验得到的时域数据进行快速傅里叶变换之后得到频域数据,再把频域数据进行归一化处理后与之前的电磁仿真结果进行对比,发现实验测得的结果与电磁软件仿真得到的结果较为吻合。     

载机平台光电转塔目标定位的仿真算法

目标定位是光电转塔典型功能和任务之一,对其定位精度的考量也是转塔作战技术指标之一,针对该问题,从理论和仿真角度进行了分析。分析目标定位中用到的坐标系及其相互转换关系,给出光电转塔视轴反演、有源目标定位、无源目标定位的算法流程,通过仿真实验加以验证,考虑了定位过程中可能的随机误差来源,并分析是否采用均值滤波及其对定位结果的影响,最后通过Monte-Carlo分析计算了定位精度。分析结果表明:1）有源定位比无源定位的精度高,在仿真假设条件下,精度约提高1倍;2）均值滤波后,定位精度有较大提升（约提高15倍）;3）18 km距离时典型无源定位精度在80%置信度条件下约为39.4 m;4）统计直方图反映出80%置信度CEP半径及最大误差距离随载机位置、姿态、转塔视轴等（体现在目标载机距离上）不同参数的变化结果。