含锡AB_5型非化学计量贮氢合金Ⅱ.电化学性能

研究了几种AB5非化学计量贮氢合金的电化学性能 ,及在低电流密度与高电流密度放电下取代元素对放电比容量、活化性能及循环寿命的影响。Sn ,Co,Mn的加入有利于提高合金的电化学贮氢容量 ,La(NiSn) 5.14 ,La(NiSnCo) 5.12 和La(NiSnMn) 5.12 具有相同的电化学贮氢容量与活化特性。尽管La(NiSn) 5.14 大电流放电性能优于La(NiSnCo) 5.12 和La(NiSnMn) 5.12 ,但其寿命短。Mn ,Co和Al可大大提高合金的使用寿命。La(NiSnCo) 5.12 被认为是一种理想的贮氢合金。     

Hydrogen electrosorption in nanocrystalline Ti-based alloys

The electrochemical behavior in alkaline solution (1 M NaOH) of nanocrystalline Ti:Ru:Fe:O (2:1:1:2) prepared by high-energy ball milling was studied over its whole electroactivity domain, with a particular emphasis on the hydrogen evolution reaction (her). Comparison has also been made with nanocrystalline Ti:Ru:Fe (2:1:1) and a mixture of Ti:TiO:Ru:Fe₂O₃ (3/2:1/2:1:1/2). It was shown by cyclic voltammetry, open circuit potential decay and chronopotentiometry measurements that hydrogen absorption in the electrode material occurs during hydrogen discharge. The electrochemical behavior of nanocrystalline Ti:Ru:Fe:O (2:1:1:2) closely follows that of Ti:Ru:Fe (2:1:1), but differs radically from that of Ti:TiO:Ru:Fe₂O₃ (3/2:1/2:1:1/2). This is due to the fact that the former two compounds contain a significant fraction of B2 phase (59 and 97 wt.%, respectively), while the latter does not. In steady state conditions, the ratio H/B2 phase in nanocrystalline Ti:Ru:Fe:O (2:1:1:2) is 0.15, about 1.6 times less than that for the O-free nanocrystalline compound. The coefficient of diffusion of hydrogen in nanocrystalline Ti:Ru:Fe:O (2:1:1:2) is 2.6×10⁻¹³ cm² s⁻¹, more than three times less than that in nanocrystalline Ti:Ru:Fe (2:1:1). The difference between the hydrogen absorption characteristics of both nanocrystalline compounds are tracked down to the fact that their B2 phases have different stoichiometries.     

A novel method for making ultra-fine metal fibers and particles

A novel method based on plastic processing and equipment for preparing ultra-fine metal fibers and particles is reported. With this new method, metal fibers and particles can both be produced on the same equipment and the surfaces of the fibers and particles can be protected from oxidation by the polymers or solvents during the preparation process. Metal-alloy powders with lower melt point were filled into polymer by an extruder, followed by a die-drawing process at a temperature lower than the melt temperature of the metal alloy. Metal fibers or particles were obtained after the polymer matrix was washed away. Metal alloy fibers can be obtained when a polymer that strongly interacts with metal alloy, such as a special polyvinyl alcohol with a low alcoholysis degree, is used as the polymer matrix. Metal-alloy particles can be obtained when a polymer with weak interaction with metal alloy, such as polyethylene (PE), is used as the polymer matrix. Based on the principle of this new method, it is possible to produce finer or even nano-sized metal fibers and particles with higher melting points.     

Catalytic and kinetic spectrophotometric method for determination of vanadium(V) by 2,3,4-trihydroxyacetophenonephenylhydrazone

A new catalytic and kinetic spectrophotometric method for the determination of vanadium(V) was studied using 2,3,4-trihydroxyacetophenonephenylhydrazone (THAPPH) as an analytical reagent. The present method was developed on the catalytic effect of vanadium on oxidation of THAPPH by hydrogen peroxide in hydrochloric acid–potassium chloride buffer (pH = 2.8) at the 20th minute. The metal ion has formed 1:2 (M:L) complex with THAPPH. Beer’s law was obeyed in the range 20–120 ng/mL of V(V) at λ_max 390 nm. The sensitivity of the method was calculated in terms of molar absorptivity (1.999 × 10⁵ L mol⁻¹cm⁻¹) and Sandell’s sensitivity (0.000254 μg cm⁻²), shows that this method is more sensitive. The standard deviation (0.0022), relative standard deviation (0.56%), confidence limit (±0.0015) and standard error (0.0007) revealed that the developed method has more precision and accuracy. The stability constant was calculated with the help of Asmu’s (9.411 × 10⁻¹¹) and Edmond’s & Birnbaum’s (9.504 × 10⁻¹¹) methods at room temperature. The interfering effect of various cations and anions was also studied. The present method was successfully applied for the determination of vanadium(V) in environmental and alloy samples. The method’s validity was checked by comparing the results obtained with atomic-absorption spectrophotometry and also by evaluation of results using F-test.     

形状记忆合金在结构主被动振动控制中的应用

开状记忆合金是一类应用前景广阔的智能材料系统,利用形状记忆合金材料控制结构振动是最能体现这种先进材料应用价值的重要研究方向之一．本文首先介绍形状记忆合金的主要力学行为,包括形状记忆效应和超弹性效应;其次概述描述其力学行为的本构关系模型;最后重点论述实现结构主被动控制的原理和方法及其国内外研究进展,指出存在的问题和改进方法．