锆对铂重整催化剂性能的影响规律

以正庚烷的转化为探针反应 ,研究了添加元素锆对铂重整催化剂性能的影响规律。结果表明 ,在 4 50℃和连续流动条件下 ,Pt/γ -Al2 O3催化剂中引入锆不仅能够提高铂催化剂的稳定性和芳构化产率、抑制氢解和异构化 ,而且能使铂催化剂保持初活性。锆含量在 0 .56%左右 ,其调变作用最为显著。     

Isomerization ofn-hexane overplatinum loaded zeolites

The effect of the calcination temperature of bifunctional Pt/zeolites on the isomerization ofn-hexane has been investigated. The catalyst calcined at 350°C showed the highest metal dispersity and the best activity. The higher selectivity of dimethylbutanes over Pt/H- than over Pt/H-MOR might be attributed to the combined effect of acidity, channel structure and pore size of zeolites.     

前驱体水解对纳米铂形状控制合成的影响

以聚丙烯酸钠(NaPA: M_w ≈ 2100)为保护剂，对比研究了H_2还原K_2PtCl_4 和K_2PtCl_6水溶液制备纳米铂晶粒的形状选择性，揭示了前驱体的水解对纳米铂 晶粒的形状控制合成具有显著影响。文献中通常采用的合成立方形状纳米铂的 K_2PtCl_4前驱体在水溶液中不稳定，避光静置一周会析出黑色沉淀。这种不稳定 性导致了以K_2PtCl_4为Pt前驱体的合成结果难以重复。相比而言，避光静墨的 K_2PtCl_6水溶液很稳定，以它为前驱体合成的纳米铂通常为削角八面体。 K_2PtCl_6水溶液暴露于室内光线中会出现[PtCl_6]~(-2)的光致水解。当[PtCl_6] ~(2-)的紫外特征吸收峰(260nm)由于光致水解完全消失后，以聚丙烯酸钠为保护剂 ，通过H_2还原可以有选择性地(约80%)合成由{100}晶面包裹的立方体形状的纳米 铂。     

Pt immobilized spontaneously on porous MXene/MAX hybrid monolith for hydrogen evolution reaction

Designing efficient electrocatalysts with low Pt loadings for hydrogen evolution reaction(HER) is urgently required for renewable and sustainable energy conversion.Here,we report a strategy that Pt nanoparticulates are spontaneously immobilized on porous MXene/MAX monolith as HER catalysts by utilizing the redox reaction between Ti_3C_2T_x MXene and [PtCl_4]~2 in H_2 PtCl_6 aqueous solution.By taking advantage of homogeneously distributed Pt nanoparticulates on highly electrically conductive porous Ti_3C_2T_x/Ti_3AlC_2 monolith,the as-prepared electrocatalysts show high catalytic performance for hydrogen evolution.Specifically,the binder-free electrocatalysts have Pt loadings as low as 8.9 μg/cm~2,with low overpotential of 43 mV at a curre nt density of 10 mA/cm~2 and low Tafel slope that three times lower than porous Ti_3C_2T_x/Ti_3AlC_2 without Pt loading.This strategy offers a new approach to constructing ultra-low Pt-loading HER catalysts on the basis of in situ redox reaction between noble metal ions and MXenes.     

Reaktivität von Monophosphan-Platin(0)-Verbindungen gegenüber Schwefeldioxid

Reactivity of Monophosphine Platinum(0) Complexes with SO₂ . The addition reaction of (PPh₃)Pt(ViSi) (ViSi = {η²-H₂C?CHSiMe₂}₂O) ( 1 ) with SO₂ gives within 30 min the red SO₂ complex (PPh₃)Pt(η²-H₂C?CHSiMe₂- OSiMe₂CH?CH₂)(SO₂) ( 2 ). A reaction time of 24 h with SO₂ leads to the elimination of the ViSi ligand, and the unstable monomeric intermediate (PPh₃)Pt(SO₂) cyclo- trimerizes to the stable cluster [Pt(PPh₃)(SO₂)]₃ ( 3 ). 3 is also obtained within 30 min by the reaction of (PPh₃)Pt(C₂H₄)₂ ( 4 ) with SO₂. The crystal structure of 3 has been determined; space group P2₁/n, Z = 4, a = 1 606.1(3), b = 1 019.3(1), c = 3 624.6(5) pm, β = 93.67°, R/R_w = 0.102/0.121.     

In Situ Amperometric Detection of Vesicles and Microgel Phases in an Aggregating System: Calcium Alginate

In situ amperometric characterization of an aggregating system in terms of molecular adsorption and single microparticle interactions at the electrode interface is demonstrated using a model system: alginate/Ca(II) in an aqueous electrolyte solution. Recording of chronoamperometric curves of oxygen reduction at the dropping mercury electrode is designed for detection of dip‐shaped signals of individual gel microparticles. By addition of Ca(II) decrease of alginate adsorption is accompanied by appearance of signals indicating vesicle type association of alginate molecules and microparticles of gel phase. AFM imaging provided evidence of initial stage in calcium alginate gel formation.     

Interaction of gas phase atomic hydrogen with Pt(111):Direct evidence for the formation of bulk hydrogen species

Employing hot tungsten filament to thermal dissociate molecular hydrogen,we generated gas phase atomic hydrogen under ultra-high vacuum(UHV)conditions and investigated its interaction with Pt(111) surface.Thermal desorption spectroscopy(TDS)results demonstrate that adsorption of molecular hy- drogen on Pt(111)forms surface Had species whereas adsorption of atomic hydrogen forms not only surface Had species but also bulk Had species.Bulk Had species is more thermal-unstable than surface Had species on Pt(111),suggesting that bulk Had species is more energetic.This kind of weakly- adsorbed bulk Had species might be the active hydrogen species in the Pt-catalyzed hydrogenation reactions.     

Study of silica supported PtxNi1-x catalysts by ion scattering spectroscopy

As supported Pt_xNi_1–x catalysts are used for hydrogenation reactions, it seemed necessary to assess the surface composition of the reduced samples. To approach the usual reduction conditions we applied in situ reduction in a reaction chamber (1 mbar H₂ up to 500 °C) placed in ultra high vacuum recipient (UHV: 10^–9 to 2.10^–10mbar). All ion scattering spectroscopy measurements were performed in UHV. Charging of the samples was avoided by electron bombardment (5 eV). The variation of the surface composition was determined after subsequent sputtering, thermal treatment at 500 °C and during oxygen adsorption. A comparison with previous results of surface compositions of binary alloys (polycrystalline foils [1, 2] and single crystals Pt_xNi_1–x [3]) is given.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday     

Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.