Flexible Polyester Cellulose Paper Supercapacitor with a Gel Electrolyte

A low-cost polyester cellulose paper has been used as a substrate for a flexible supercapacitor device that contains aqueous carbon nanotube ink as the electrodes and a polyvinyl alcohol (PVA)-based gel as the electrolyte. Gel electrolytes have attracted much interest due to their solvent-holding capacity and good film-forming capability. The electrodes are characterized for their conductivity and morphology. Because of its high conductivity, the conductive paper is studied in supercapacitor applications as active electrodes and as separators after coating with polyvinylidene fluoride. Carbon nanotubes deposited on porous paper are more accessible to ions in the electrolyte than those on flat substrates, which results in higher power density. A simple fabrication process is achieved and paper supercapacitors are tested for their performance in both aqueous and PVA gel electrolytes by using galvanostatic and cyclic voltammetry methods. A high specific capacitance of 270 F g⁻¹ and an energy density value of 37 W h kg⁻¹ are achieved for devices with PVA gel electrolytes. Furthermore, this device can maintain excellent specific capacitance even under high currents. This is also confirmed by another counter experiment with aqueous sulfuric acid as the electrolyte. The cycle life, one of the most critical parameters in supercapacitor operations, is found to be excellent (6000 cycles) and less than 0.5 % capacitance loss is observed. Moreover, the supercapacitor device is flexible and even after twisting does not show any cracks or evidence of breakage, and shows almost the same specific capacitance of 267 F g⁻¹and energy density of 37 W h kg⁻¹. This work suggests that a paper substrate can be a highly scalable and low-cost solution for high-performance supercapacitors.     

PVC‐Based Ion‐Selective Electrodes with Enhanced Biocompatibility by Surface Modification with “Click” Chemistry

We report here on plasticized ion‐selective poly(vinyl chloride) membranes with increased biocompatibility by means of a copper(I)‐catalyzed azide‐alkyne cycloaddition (‘click chemistry’) on the surface of finished membranes. We aimed for increasing the hydrophilicity of the surface and the application of NO releasing molecules. Employing the first principle, sodium selective membranes based on azide‐substituted PVC were modified with different length poly(ethylene glycol) (PEG) chains. For the second, cysteine groups were used as a nitrous oxide releasing substance. Surface modification was confirmed by Electrochemical Impedance Spectroscopy (EIS). Potentiometric measurements in undiluted whole blood showed an increased sensor stability in comparison to unmodified PVC. Membrane surfaces after 18 h contact with blood were analyzed with Scanning Electron Microscopy (SEM) and revealed a reduced level of blood cell adsorption on membranes modified with tetraethylene glycol (TEG) and PEGs. In contrast, cysteine modified membranes did not exhibit improved fouling resistance, suggesting that nitric oxide release by itself is not a sufficiently efficient mechanism.     

Sensitive Stripping Determination of Cadmium(II) and Lead(II) on Disposable Graphene Modified Screen‐Printed Electrode

In the present work, a sensitive, facile and disposable sensing platform for trace analysis of heavy metal ions was developed at the Bi modified graphene‐poly(sodium 4‐styrenesulfonate) composite film screen printed electrode (GR/PSS/Bi/SPE). The GR/PSS/Bi/SPE improved sensitivity and linearity due to the functionalization of graphene with negatively charged PSS providing more absorbing sites. The detection limit of the GR/PSS/Bi/SPE is found to be 0.042 µg L^?1 for Cd²⁺ and 0.089 µg L^?1 for Pb²⁺ with linear responses of Cd²⁺ and Pb²⁺ in the range of 0.5–120 µg L^?1. Finally, the practical application was confirmed in real water with satisfactory results.     

Sensitive voltammetric determination of gallium in aluminium materials using renewable mercury film silver based electrode

Simple cyclic renewable silver amalgam film electrode (Hg(Ag)FE), applied for the determination of gallium(III) using differential pulse anodic stripping voltammetry (DP ASV), is presented. The effects of various factors such as: preconcentration potential and time, pulse height, step potential and supporting electrolyte composition are optimised. The calibration graph is linear from 5?nM (0.35?µg?L^?1) to 80?nM (5.6?µg?L^?1) for a preconcentration time of 60?s, with correlation coefficient of 0.995. For a Hg(Ag)FE with a surface area of 9.9?mm² the detection limit for a preconcentration time of 120?s is as low as 0.1?µg?L^?1. The repeatability of the method at a concentration level of the analyte as low as 3.5?µg?L^?1, expressed as RSD is 3.2% (n?=?5). The proposed method was successfully applied by studying the synthetic samples and simultaneously recovery of Ga(III) from spiked aluminium samples.     

Determination of 1-hydroxypyrene in human urine by a multi-wall carbon nanotubes-modified glassy carbon electrode

A multi-walled carbon nanotubes (MWNTs) modified glassy carbon electrode (MWNT-GCE) was used to study the electrochemical behaviour of1-hydroxypyrene (1-OHP) and applied to its determination. The results showed that the modified electrode had a strong adsorptive ability to 1-OHP and enhances its electrochemical signal. By square wave voltammetry, the linear relationship of 1-OHP was 6?×?10^?9???8?×?10^?7?mol?L^?1 with a linear correlation coefficient of 0.996, and the detection limit was 1?×?10^?10?mol?L^?1. Compared with other published methods, this newly proposed method possesses many advantages such as very low detection limit, fast response, low cost and simplicity. And this method was applied successfully in the determination of 1‐OHP in real human urine samples.     

Molecular Dynamics in 1- and 2-D Confinement as Studied for the Case of Poly(Cis-1,4-Isoprene)

Broadband Dielectric Spectroscopy (BDS) is used to probe the molecular dynamics of Type A polymer, poly(cis-1,4-isoprene), when confined in the 1-dimensional (1D) exploring space of thin layers and the 2-dimensional (2D) constraining geometry of unidirectional anodic aluminum oxide (AAO) nanopores. For both cases, it was observed that the structural relaxation remains bulk-like in its mean relaxation rate, although the distribution of its relaxation times is broadened in 2D confinement. Furthermore, the fluctuation of the end-to-end vector is interrupted, with the 1D case being relatively less pronounced. By this clear-cut comparison, it is demonstrated that the effects of confinement on molecular dynamics depend, inter alia, on the dimensionality of the restricting space.     

Using Prussian blue analogue nanoparticles confined into ordered mesoporous silica monoliths as precursors of oxides

Powdered Prussian blue analogues (PBAs) and PBAs confined in ordered mesoporous silica monoliths were used as oxide precursors through thermal treatment under an oxidizing atmosphere. The study focuses on the transformation of the alkali cation-free CoCo PBA of chemical formula K_0.1Co^II₄[Co^III(CN)₆]_2.7·20 H₂O. The compounds were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), IR spectroscopy and small-angle X-ray scattering (SAXS), and the magnetic properties of the calcined samples were investigated. In both cases, powdered and confined PBAs, the coordination polymers are transformed into well-crystallized Co₃O₄ spinel oxide. In the case of the confined PBA, isolated Co₃O₄ single crystals confined within the ordered mesoporosity of the monoliths were evidenced by HRTEM. A preliminary study shows an effect of particle size and confinement on the magnetic properties of the confined oxide particles.     

Carbon‐Coated LiTi2(PO4)3: An Ideal Insertion Host for Lithium‐Ion and Sodium‐Ion Batteries

We report the extraordinary performance of carbon‐coated sodium super ion conductor (NASICON)‐type LiTi₂(PO₄)₃ as an ideal host matrix for reversible insertion of both Li and Na ions. The NASICON‐type compound was prepared by means of a Pechini‐type polymerizable complex method and was subsequently carbon coated. Several characterization techniques such as XRD, thermogravimetric analysis (TGA), field‐emission (FE) SEM, TEM, and Raman analysis were used to study the physicochemical properties. Both guest species underwent a two‐phase insertion mechanism during the charge/discharge process that was clearly evidenced from galvanostatic and cyclic voltammetric studies. Unlike that of Li (≈1.5 moles of Li), Na insertion exhibits better reversibility (≈1.59 moles of Na) while experiencing a slightly higher capacity fade (≈8 % higher than Li) and polarization (780 mV) than Li. However, excellent rate capability profiles were noted for Na insertion relative to its counterpart Li. Overall, the Na insertion properties were found to be superior relative to Li insertion, which makes carbon‐coated NASICON‐type LiTi₂(PO₄)₃ hosts attractive for the development of next‐generation batteries.     

Introduction of high valent Mo6+ in Prussian blue analog derived Co-layered double hydroxide nanosheets for improved water splitting

Herein, we report a facile method for synthesizing MoCo-layered double hydroxide (LDH) nanosheets employing Prussian blue analog (PBA) as the precursor. The introduction of Mo in Co-LDH modulates the electronic structure, increases the number of active sites and electrochemical surface area to improve the hydrogen evolution, oxygen evolution, and overall water splitting activity. As a result, PBA-derived Mo_0.25Co_0.75-LDH nanosheets demonstrated 10 mA cm^?2 current density at only 220 mV and 115 mV overpotentials for OER and HER, respectively. The overall water splitting was attained at 1.52 V cell voltage for 10 mA cm^?2 current density.     

Bimetallic CuCo Derived from Prussian Blue Analogue for Nonenzymatic Glucose Sensing

Bimetallic CuCo composites are prepared by calcinating copper hexacyanocobaltate precursor in N₂ atmosphere. The CuCo modified electrodes are fabricated for nonenzymatic glucose sensing in the alkaline electrolyte. The glucose can be directly electro-oxidized on the surface of the electrode catalyst mediated by the redox couples of Cu and Co. The optimal glucose sensor exhibits a high sensitivity (567 μA ⋅ mM⁻¹ ⋅ cm⁻²) in the range up to 825 μM with a detection limit of 3 μM and acceptable selectivity. The sensor can also be applied in serum samples. This work provides a facile and easily-scalable synthesis method of electrocatalysts for nonenzymatic glucose sensors.