Crystal structure of Schiff base derivative of 2,2′-dihydroxybiphenyl-3-carbaldehyde with n-butylamine

Crystals of the Schiff base derivative of 2,2′-dihydroxybiphenyl-3-carbaldehyde with n-butylamine were examined using X-ray diffraction, FT-IR and CPMAS spectroscopy. Their space group is with a=8.377(2), b=12.214(2), c=14.774(3) Å, =76.62(3)°, β=81.34(3)°, γ=86.62(3)° and Z=4. The unit cell contains two symmetry-independent zwitterions. The hydrogen atom of the protonated N atom of the Schiff base is linked to the oxygen atom of the carbonyl group at position 2, which in turn is linked to the hydroxyl group by a short hydrogen bond [molecule A: NO=2.614(3), OO=2.520(3) Å; molecule B: NO=2.594(4), OO=2.526(3) Å]. The OHO⁻H⁺N bifurcated intramolecular hydrogen bonds are crystallographically asymmetric. The results of the FT-IR, ¹H, ¹³C, ¹⁵N NMR and CPMAS study of the crystals are in agreement with the X-ray data. Instead of a continuous absorption, only a broad band is found indicating relatively low proton polarizability in the two types of the cooperative relatively short intramolecular hydrogen bonds. The ¹⁵N NMR chemical shift indicates the protonation of the Schiff base.     

Synthesis, Structure and Conductivity of （PyH）[Ni（dmit）2]2

A new molecular conductor (PyH)[Ni(dmit)2]2 (dmit = 4, 5-dimercapto-1, 3-dithiole-2-thione) has been prepared and its crystal structure has been determined. Crystallographic parameters for (PyH)[Ni(dmit)2]2: C17H6NNi2S20; triclinic system; P-1 space group; a = 5.9227 (4) , b =8.2279 (6), c = 16.7535 (9) A, a = 90.233 (5) , 0 = 92.107 (6) , y= 104.654 (6) ; V= 789.25 (9) A3; Z = 1; Dc = 2.068 g/cm3; F (000) = 491. The conductivity at one direction on (001) plane at room temperature was measured to be 0.13 ii^-cmf1. The resistivity-temperature curve in the temperature range of 90-290 K shows that this compound behaves as a semiconductor.     

Pressure effect on proton jumps in dioxane-water mixtures at 25°C

The limiting molar conductances ^o of hydrochloric acid and potassium chloride in 2.5, 5, 10, and 15 mol% 1,4-dioxane-water mixtures were determined at 25°C as a function of pressure up to 196.1 MPa from the conductances measured in the dilute concentration range. The value of ^o(HCl) was two to three times larger than that of ^o(KCl) in each solvent mixture as well as in pure water. The excess proton conductance, as estimated by the equation [ _E ^o =^o(HCl)–^o(KCl)], increased with pressure in each solvent mixture, although the value of _E ^o itself decreased rapidly with an increase in the dioxane content. The rate of increase in _E ^o with pressure was not so large in dioxane-water mixtures as in pure water, and became smaller with an increase in the dioxane content in contrast to the cases of ethanol-water and t-butyl alcohol (TBA)-water mixtures. These results are discussed in terms of the difference between a dioxane and an ethanol or a TBA molecule in ability to stabilize the hydrogen-bonded networks of water in the water-rich region.     

Electrical Properties of NASICON-type Structured Li1.3Al0.3Ti1.7(PO4)3 Solid Electrolyte Prepared by 1,2-Propylene glycol-assisted Sol-gel Method

Lithium-ion conductor Li_1.3Al_0.3Ti_1.7(PO₄)₃ with an ultrapure NASICON-type phase is syn-thesized by a 1,2-propylene glycol (1,2-PG)-assisted sol-gel method and characterized by differential thermal analysis-thermo gravimetric analysis, X-ray diffraction, scanning elec-tron microscopy, electrochemical impedance spectroscopy, and chronoamperometry test.Due to the use of 1,2-PG, a homogeneous and light yellow transparent precursor solu-tion is obtained without the precipitation of Ti⁴⁺ and Al³⁺ with PO₄^3-. Well crystallizedLi_1.3Al_0.3Ti_1.7(PO₄)₃ can be prepared at much lower temperatures from 850 oC to 950 oC within a shorter synthesis time compared with that prepared at a temperature above 1000 oC by a conventional solid-state reaction method. The lithium ionic conductivity of the sintered pellets is up to 0.3 mS/cm at 50 oC with an activation energy as low as 36.6 kJ/mol for the specimen pre-sintered at 700 oC and sintered at 850 oC. The high conductivity, good chemi-cal stability and easy fabrication of the Li_1.3Al_0.3Ti_1.7(PO₄)₃ provide a promising candidate as solid electrolyte for all-solid-state Li-ion rechargeable batteries.     

Ionic conduction of lithium for Perovskite-type compounds, Li x La(1− x )/3NbO3 and (Li0.25La0.25)1− x Sr0.5 x NbO3

Perovskite-type compounds, Li _x La_{(1− x )/3}NbO₃ and (Li_0.25La_0.25)_{1− x} Sr_{0.5 x} NbO₃ as lithium ionic conductors, were synthesized by a solid-state reaction. From powder X-ray diffraction, the solid solution ranges of the two compounds were determined to be 0≤x≤0.25 and 0≤x≤0.125, respectively. In the Li _x La_{(1− x )/3}NbO₃ system, the ionic conductivity of lithium at room temperature, σ₂₅, exhibited a maximum value of 4.7 × 10⁻⁵ S · cm⁻¹ at x = 0.10. However, because of the decrease in the lattice parameters with increasing Li concentration x˙, σ₂₅ of the samples decreased with increasing x from 0.10 to 0.25. Also, in the (Li_0.25La_0.25)_{1− x} Sr_{0.5 x} NbO₃ system, the lattice parameter increased with the increase of Sr concentration and the σ₂₅ achieved a maximum (7.3 × 10⁻⁵ S · cm⁻¹ at 25 °C) at x = 0.125. Received: 12 September 1997 / Accepted: 15 November 1997     

The kinetic method reveals secondary deuterium isotope effects on the proton affinity and gas-phase basicity of glycine and alanine methyl esters

The kinetic method for measuring proton affinities (PA) and gas-phase basicities (GB) was applied to the methyl esters of simple amino acids. The experiments show that the GB and PA values for deuterium labeled glycine methyl ester are indeed greater than that of the corresponding unlabelled glycine methyl ester. The PA of -Ala-OCD₃ is also slightly greater than that of the unlabeled alanine methyl ester. The secondary isotope effects originate, as shown by density functional theory, in differences in zero-point energies and thermal-energy corrections between H and D-bearing molecules.     

Synthesis,structure, and conductivity of molecular conductor (PyEt)[Ni(dmit)<Subscript>2</Subscript>]<Subscript>2</Subscript>

A new electrical conductive crystal PyEt[Ni(dmit)₂]₂ (dmit = 4,5-dimercapto-1,3-dithiole-2-thione) has been synthesized and its X-ray structure has been determined to be in monoclinic system, C2/c space group. In PyEt[Ni(dmit)₂]₂ crystal, the conducting component [Ni(dmit)₂]^0.5- is face-to-face packed forming molecular column along the c-direction, and these molecular columns are then side-by-side extended along the a-direction forming a kind of two-dimensional conducting sheet on (010). The measured conductivity at room temperature along a certain direction on (010) plane is 10 S · cm^-1. From 282 to 269 K, the crystal shows metallic behavior but changes to semiconductor below 269 K. Based on the measured crystal structure and calculated band structure, this conductor-semiconductor phase transformation can be primarily interpreted: The metallic conductivity is corresponding to the uniform molecular column and the atomic-lattice-chain structure of Ni chain, while the semi-conductive behavior to staggered molecular column and the atomic-zigzag-chain structure of Ni chain.     

交联嵌段磺化聚芳醚砜质子交换膜的制备及性能

为提高磺化聚芳醚砜(SPAES)质子交换膜的质子传导率及稳定性, 制备了一系列交联嵌段SPAES质子交换膜(cbSPAES). 采用嵌段共聚方法, 在P₂O₅存在下, 利用磺酸基团与聚合物主链上活泼氢的脱水反应进行交联改性合成嵌段聚合物. 采用电化学阻抗谱技术测定了cbSPAES膜的质子传导率, 通过测试水中膜平面及厚度方向的尺寸变化率评价膜的尺寸稳定性, 通过加速老化试验评价膜的水解稳定性. 结果表明, 与未交联膜相比, cbSPAES膜的尺寸稳定性及水解稳定性明显提高; 在交联程度相同时, cbSPAES膜的吸水率和质子传导率随着磺化链段长度的增加呈上升的趋势. 如cbSPAES(30/10)-10膜在60 ℃水中的吸水率为65%, 平面方向和厚度方向的尺寸变化率分别为0.16和0.18, 质子传导率达到163 mS/cm.     

Enantiomeric separation of proton pump inhibitors on new generation chiral columns using LC and supercritical fluid chromatography

The enantioselectivity of proton pump inhibitors, namely, omeprazole, lansoprazole, rabeprazole, pantoprazole, tenatoprazole, and ilaprazole were studied using new generation chiral packing materials: CHIRALPAK IA, CHIRALPAK IB, and CHIRALPAK IC. Two versatile techniques, HPLC and supercritical fluid chromatography (SFC) were used in this study. CHIRALPAK IC has shown superior selectivity under both LC and SFC conditions, whereas CHIRALPAK IA has shown good selectivity in SFC when compared to LC under primary screening conditions. The chiral recognition ability in LC and SFC modes were found to be in the order CHIRALPAK IC > CHIRALPAK IA > CHIRALPAK IB. In addition to diode array detection, chiral detection was carried out using a laser polarimeter and the elution orders were found to be the same in both LC and SFC elution modes. Mobile phase modifiers and column temperature effects were also studied. In SFC, modifiers (cosolvent) elution strength was found to be in the order ethanol > methanol > 2‐propanol > acetonitrile. In both LC and SFC, a decrease in retention and increase in resolution with an increase in temperature was noticed for all the proton pump inhibitors.     

热处理碳载Fe-三聚氰胺及Fe-g-C3N4催化剂的氧还原催化性能

分别以三聚氰胺和三聚氰胺的聚合物为配体, 采用浸渍法合成了两种氧还原反应(ORR)催化剂Fe-N/C(1)和Fe-N/C(2). 通过X射线衍射光谱(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和电化学测试对催化剂的成分、形貌和电催化性能进行了表征. 结果表明, 以三聚氰胺聚合物为配体制备的Fe-N/C具有更高的ORR催化活性. 在高温热处理过程中, 催化剂表面能形成更多的石墨N活性点, 是其ORR性能提高的重要原因.